Canon ir1133 ошибка e355 004

Framin

  

Испачкался тонером

• 
• Персональный альбом

• Canon G1010 series, G2010 series, G3010 series, G4010 series

  Verter в форуме Файлообменник

  0

  3576

  
  Verter
  
  Ср авг 19, 2020 12:00 pm
  

• Canon IR 2018 выдает ошибку «out of toner change toner»

  Sveterkom в форуме Принтеры, МФУ, копиры формата A3

  11

  10012

  
  Goldwater
  
  Чт окт 08, 2020 11:29 pm
  

• Canon G1000 series, G2000 series, G3000 series Service Manua

  Verter в форуме Файлообменник

  10

  5875

  
  Azelus
  
  Пт июн 12, 2020 4:46 am
  

• Canon IR 3225 «засыпает»

  johnnybravo в форуме Принтеры, МФУ, копиры формата A3

  4

  7160

  
  johnnybravo
  
  Пн июл 23, 2012 1:32 pm
  

• Canon LaserBase MF6540PL «НЕТ ТОНЕРА»

  GSA в форуме Принтеры, МФУ, факсы, копиры формата A4

  4

  10460

  
  GSA
  
  Пт сен 23, 2011 8:36 pm
  

Thanks:  0

Likes:  0

Dislikes:  0

1. 08-27-2013

   
   

   #1

   IR1133 showing E355-0004
   

   Hie guys. I have an IR1133 which has been working fine since January when it was installed. All of a sudden the display is up side down and its in Chinese. Can only make out the error code E355 — 0004. Cant get into service mode to reset. Any ideas?

   ---

2. 08-27-2013

   
   

   #2

   Re: IR1133 showing E355-0004
   

   Originally Posted by NM0174
   

   Hie guys. I have an IR1133 which has been working fine since January when it was installed. All of a sudden the display is up side down and its in Chinese. Can only make out the error code E355 — 0004. Cant get into service mode to reset. Any ideas?

   ———————————————E355-004 denotes a mismatch of the three serial numbers items: Serial Number pcb, MNCON pcb, and Counter Memory pcb.
   Mismatch of serial numbers of three items: Serial Number PCB, Main Controller / Image Processor PCB (SRAM) and Counter
   Memory PCB.

   1. Put back all original PCBs into the equipment!
   2. Do not utilize a used Counter Memory PCB or Serial Number PCB from any other equipment

   After �Prohibited Action� has been corrected, perform �E355 CLR�. (FUNCTION>CLEAR>
   E355-CLR) then cycle power off and on.

   who has been swapping pcb’s

   enter Service Mode Level 3 and perform an E355 Clear as follows:
   Additional Functions button then 2/8 keys then Additional Functions button
   Additional Functions button then 1/9 keys then 3
   COPIER>FUNCTION>CLEAR>E355-CLR
   Turn OFF and then ON the equipment.

   **Knowledge is time consuming, exhausting and costly for a trained Tech.**

   ---

3. 08-27-2013

   
   

   #3

   Re: IR1133 showing E355-0004
   

   Originally Posted by teckat
   

   ———————————————

   E355-004 denotes a mismatch of the three serial numbers items: Serial Number pcb, MNCON pcb, and Counter Memory pcb.
   Mismatch of serial numbers of three items: Serial Number PCB, Main Controller / Image Processor PCB (SRAM) and Counter
   Memory PCB.

   1. Put back all original PCBs into the equipment!
   2. Do not utilize a used Counter Memory PCB or Serial Number PCB from any other equipment

   After �Prohibited Action� has been corrected, perform �E355 CLR�. (FUNCTION>CLEAR>
   E355-CLR) then cycle power off and on.

   who has been swapping pcb’s

   

   enter Service Mode Level 3 and perform an E355 Clear as follows:

   Additional Functions button then 2/8 keys then Additional Functions button
   Additional Functions button then 1/9 keys then 3
   COPIER>FUNCTION>CLEAR>E355-CLR
   Turn OFF and then ON the equipment.

   This machine was installed in January, the only thing that was changed is the tonner cartridge. That’s it!!! Nothing has ever been done to it except that. We haven’t even opened any cover until now when the machine found its ancestry back to Asia

   ---

4. 08-28-2013

   
   

   #4

   Re: IR1133 showing E355-0004
   

   Originally Posted by NM0174
   

   This machine was installed in January, the only thing that was changed is the tonner cartridge. That’s it!!! Nothing has ever been done to it except that. We haven’t even opened any cover until now when the machine found its ancestry back to Asia

   =============

   First try removing & Re-fitting all the harness connections within the control panel assembly

   Removing the Control Panel
   1) Open the ADF Unit + Reader Unit [1].1.JPG
   2) Release the claw [1], and remove the Arm Cover [2].
   2.JPG3.JPG3) Release the Connection of Arm [1] and turn it toward the rear.
   4.JPG5.JPG

   4) Remove the

   2 Blanking Sheets [1] and 4 Screws [2] On the Bottom Of the Reader Unit.
   CAUTION:
   Since the Blanking Sheet [1] Needs to be Purchased Separately, be Careful Not to Lose
   it After Removing It.
   6.JPG

   5) Remove the Control Panel [1].
   • 9 Claws [2]
   •

   1 Flat Cable [3]
   • 1 Terminal [4]
   7.JPG8.JPG

   if no help>>>
   well——-go in service mode as I posted & see if code clears out-

   if not _u need to go in back of printer to check board connections

   Last edited by teckat; 08-28-2013 at 02:12 AM.

   **Knowledge is time consuming, exhausting and costly for a trained Tech.**

   ---

Tags for this Thread

marley

Aucun diplome

Messages : 18

Enregistré le : lun. 11 janv. 2010 00:00

Localisation : pointe noire CONGO BZV

perri28

Technicien Confirmé

Messages : 543

Enregistré le : ven. 14 avr. 2006 00:00

Localisation : chartres

Contact :

Qui est en ligne

Utilisateurs parcourant ce forum : Bing [Bot], Google [Bot] et 1 invité