инструмент фреза диаметром 5 ровно
думаете не совпадает диаметры инструмента в программе и в офф сете станка потому и ошибка вылазит?
это я выложил кусок конкретный а целиком инструмент вот
T3 M06 (freza_d5)
G00 G54 G90 X93.189 Y-41.868 S3500 M03
G43 H03 Z5. M08
(Karman e-kv Pripusk=0.2 Z=-2.03 DZ=2.03)
N17 G1 Z0.5 F1000.
N19 G3 X90.692 Y-42. Z0.078 R-1.25 F85.
N21 G3 X93.189 Y-41.868 Z-0.343 R1.25
N23 G3 X90.692 Y-42. Z-0.765 R-1.25
N25 G3 X93.189 Y-41.868 Z-1.187 R1.25
N27 G3 X90.692 Y-42. Z-1.608 R-1.25
N29 G3 X93.189 Y-41.868 Z-2.03 R1.25
N31 G3 X90.692 Y-42. R-1.25
N33 G3 X93.189 Y-41.868 R1.25
N35 G3 X90.692 Y-42. R-1.25
N37 G2 X90.7 Y-42.3 R5.714 F175.
N39 G1 Y-44.6
N41 G1 X91.3
N43 G1 Y-42.3
N45 G2 X91.308 Y-42. R5.714
N47 G1 X90.692
N49 G1 X89.2 Y-42.3
N51 G1 Y-46.1
N53 G1 X92.8
N55 G1 Y-42.3
N57 G2 X93.205 Y-40.5 R4.2
N59 G1 X90.
N61 G2 X88.688 Y-40.29 R4.2
N63 G1 X86.312 Y-38.31
N65 G2 X85.8 Y-36.3 R4.2
N67 G1 Y-22.029
N69 G2 X84.073 Y-22.4 R4.2
N71 G1 X81.96
N73 G2 X82.2 Y-23.8 R4.2
N75 G1 Y-27.677
N77 G1 X84.3 Y-26.893
N79 G1 Y-23.895
N81 G2 X84.073 Y-23.9 R5.698
N83 G1 X83.7
N85 G1 Y-26.585
N87 G2 X84.3 Y-26.893 R5.703
N89 G1 X82.2 Y-27.677
N91 G2 X85.6 Y-31.8 R4.2
N93 G1 Y-38.143
N95 G2 X86.312 Y-38.31 R4.201
N97 G1 X88.688 Y-40.29
N99 G2 X89.2 Y-42.3 R4.2
N101 G1 X87.7
N103 G1 Y-47.6
N105 G1 X94.3
N107 G1 Y-42.3
N109 G2 X97. Y-39.6 R2.7
N111 G1 X105.
N113 G2 X106.89 Y-40.371 R2.7
N115 G1 X107.939 Y-39.3
N117 G2 X109.2 Y-42.3 R4.2
N119 G1 Y-57.1
N121 G1 X110.8
N123 G1 Y-32.5
N125 G1 X109.2
N127 G1 Y-36.3
N129 G2 X107.939 Y-39.3 R4.2
N131 G1 X106.89 Y-40.371
N133 G2 X107.7 Y-42.3 R2.7
N135 G1 Y-58.6
N137 G1 X112.3
N139 G1 Y-31.
N141 G1 X107.7
N143 G1 Y-36.3
N145 G2 X105. Y-39. R2.7
N147 G1 X90.
N149 G2 X87.3 Y-36.3 R2.7
N151 G1 Y-19.
N153 G1 X86.652
N155 G2 X84.073 Y-20.9 R2.7
N157 G1 X65.7
N159 G1 Y-21.1
N161 G1 X78.
N163 G2 X80.7 Y-23.8 R2.7
N165 G1 Y-28.8
N167 G3 X81. Y-29.1 R0.3
N169 G1 X81.4
N171 G2 X84.1 Y-31.8 R2.7
N173 G1 Y-39.3
N175 G3 X84.4 Y-39.6 R0.3
N177 G1 X85.
N179 G2 X87.7 Y-42.3 R2.7
N181 G1 X89.2
N183 G1 Z5. F3000.
(Kontur tsent Pripusk=0 Z=-2.03 DZ=2.03)
N13 G1 X87. Y-24.506
N17 G1 Z0.5 F1000.
N19 G1 Z-2.03 F85.
N21 G1 G41 D03 X89.121 Y-26.627 F175.
N23 G3 X90. Y-24.506 R3.
N25 G1 Y-18.8
N27 G3 X87.5 Y-16.3 R2.51
N29 G1 X86.5
N31 G3 X84.073 Y-18.2 R2.51
N33 G1 X65.5
N35 G3 X63. Y-20.7 R2.51
N37 G1 Y-21.3
N39 G3 X65.5 Y-23.8 R2.51
N41 G1 X78.
N43 G1 Y-28.8
N45 G3 X81. Y-31.8 R3.
N47 G1 X81.4
N49 G1 Y-39.3
N51 G3 X84.4 Y-42.3 R3.
N53 G1 X85.
N55 G1 Y-47.8
N57 G3 X87.5 Y-50.3 R2.51
N59 G1 X94.5
N61 G3 X97. Y-47.8 R2.51
N63 G1 Y-42.3
N65 G1 X105.
N67 G1 Y-58.8
N69 G3 X107.5 Y-61.3 R2.51
N71 G1 X112.5
N73 G3 X115. Y-58.8 R2.51
N75 G1 Y-30.8
N77 G3 X112.5 Y-28.3 R2.51
N79 G1 X107.5
N81 G3 X105. Y-30.8 R2.51
N83 G1 Y-36.3
N85 G1 X90.
N87 G1 Y-24.506
N89 G3 X89.121 Y-22.385 R3.
N91 G1 G40 X87. Y-24.506
N93 G1 Z5. F3000.
(Karman e-kv Pripusk=0.2 Z=-4.03 DZ=2.015)
N13 G1 X122.7 Y-28.5
N17 G1 Z0.5 F1000.
N19 G1 Y-61.1 Z-2.015 F85.
N21 G1 X124.3 F175.
N23 G1 Y-28.5
N25 G1 X122.7
N27 G1 Y-61.1
N29 G1 Z5. F3000.
N31 G1 Y-28.5
N33 G1 Z-1.515 F1000.
N35 G1 Y-61.1 Z-4.03 F85.
N37 G1 X124.3 F175.
N39 G1 Y-28.5
N41 G1 X122.7
N43 G1 Y-61.1
N45 G1 Z5. F3000.
(Kontur tsent Pripusk=0 Z=-4.03 DZ=4.03)
N13 G1 X123. Y-31.672
N17 G1 Z0.5 F1000.
N19 G1 Z-4.03 F85.
N21 G1 G41 D03 X120.879 Y-29.55 F175.
N23 G3 X120. Y-31.672 R3.
N25 G1 Y-61.3
N27 G3 X122.5 Y-63.8 R2.51
N29 G1 X124.5
N31 G3 X127. Y-61.3 R2.51
N33 G1 Y-28.3
N35 G3 X124.5 Y-25.8 R2.51
N37 G1 X122.5
N39 G3 X120. Y-28.3 R2.51
N41 G1 Y-31.672
N43 G3 X120.879 Y-33.793 R3.
N45 G1 G40 X123. Y-31.672
N47 G1 Z5. F3000.
(Karman e-kv Pripusk=0.2 Z=-2.03 DZ=2.03)
N13 G1 X125.2 Y-10.499
N17 G1 Z0.5 F1000.
N19 G3 X122.7 Z0.078 R1.25 F85.
N21 G3 X125.2 Z-0.343 R1.25
N23 G3 X122.7 Z-0.765 R1.25
N25 G3 X125.2 Z-1.187 R1.25
N27 G3 X122.7 Z-1.608 R1.25
N29 G3 X125.2 Z-2.03 R1.25
N31 G3 X122.7 R1.25
N33 G3 X125.2 R1.25
N35 G3 X122.7 R1.25
N37 G1 Y-13.6 F175.
N39 G1 X129.3
N41 G1 Y-10.7
N43 G1 X124.2
N45 G2 X122.7 Y-10.499 R5.7
N47 G1 X124.2 Y-9.2
N49 G2 X121.2 Y-7.939 R4.2
N51 G1 X120. Y-1.361
N53 G1 Y-1.2
N55 G1 X64.793
N57 G2 X64.941 Y-1.5 R4.204
N59 G1 X68.269
N61 G2 X68.566 Y-1.2 R4.203
N63 G1 X119.834
N65 G2 X120. Y-1.361 R4.199
N67 G1 X121.2 Y-7.939
N69 G1 Y-15.1
N71 G1 X130.8
N73 G1 Y-9.2
N75 G1 X124.2
N77 G1 Y-7.7
N79 G2 X121.5 Y-5. R2.7
N81 G1 Y0.3
N83 G1 X47.2
N85 G1 X48.7 Y-1.2
N87 G1 Y-1.5
N89 G1 X53.859
N91 G2 X54.007 Y-1.2 R4.204
N93 G1 X48.7
N95 G1 X47.2 Y0.3
N97 G1 Y-2.7
N99 G3 X47.5 Y-3. R0.3
N101 G1 X54.742
N103 G3 X55.038 Y-2.75 R0.3
N105 G2 X57.7 Y-0.5 R2.7
N107 G1 X61.1
N109 G2 X63.762 Y-2.75 R2.7
N111 G3 X64.058 Y-3. R0.3
N113 G1 X68.862
N115 G3 X69.116 Y-2.86 R0.3
N117 G2 X71.4 Y-1.6 R2.7
N119 G1 X117.
N121 G2 X119.7 Y-4.3 R2.7
N123 G1 Y-16.6
N125 G1 X132.3
N127 G1 Y-7.7
N129 G1 X124.2
N131 G1 Y-9.2
N133 G1 Z5. F3000.
(Kontur tsent Pripusk=0 Z=-2.03 DZ=2.03)
N13 G1 X120. Y-12.28
N17 G1 Z0.5 F1000.
N19 G1 Z-2.03 F85.
N21 G1 G41 D03 X117.879 Y-10.159 F175.
N23 G3 X117. Y-12.28 R3.
N25 G1 Y-16.8
N27 G3 X119.5 Y-19.3 R2.51
N29 G1 X132.5
N31 G3 X135. Y-16.8 R2.51
N33 G1 Y-7.5
N35 G3 X132.5 Y-5. R2.51
N37 G1 X124.2
N39 G1 Y0.5
N41 G3 X121.7 Y3. R2.51
N43 G1 X47.
N45 G3 X44.5 Y0.5 R2.51
N47 G1 Y-2.7
N49 G3 X47.5 Y-5.7 R3.
N51 G1 X54.742
N53 G3 X57.7 Y-3.2 R3.
N55 G1 X61.1
N57 G3 X64.058 Y-5.7 R3.
N59 G1 X68.862
N61 G3 X71.4 Y-4.3 R3.
N63 G1 X117.
N65 G1 Y-12.28
N67 G3 X117.879 Y-14.402 R3.
N69 G1 G40 X120. Y-12.28
N71 G1 Z5. F3000.
(Karman e-kv Pripusk=0.2 Z=-5.2 DZ=1.75)
N13 G1 X36.2 Y-10.5
N17 G1 Z0.5 F1000.
N19 G1 X71. Z-1.75 F85.
N21 G3 Y-9.9 R0.3 F175.
N23 G1 X36.2
N25 G3 Y-10.5 R0.3
N27 G1 X71.
N29 G1 Z5. F3000.
N31 G1 X17. Y-8.1
N33 G1 Z0.5 F1000.
N35 G1 Y-13.1 Z0. F85.
N37 G1 Y-8.1 Z-0.5
N39 G1 Y-13.1 Z-1.
N41 G1 Y-8.1 Z-1.5
N43 G1 Y-13.1 Z-1.75
N45 G1 X22.1 F175.
N47 G1 Y-12.4
N49 G1 X17.
N51 G1 Y-13.1
N53 G1 X15.363 Y-14.6
N55 G1 X23.6
N57 G1 Y-10.9
N59 G1 X15.5
N61 G1 Y-13.2
N63 G2 X15.363 Y-14.6 R7.201
N65 G1 X14. Y-13.2
N67 G2 X13.293 Y-15.95 R5.7
N69 G2 X13.373 Y-16.1 R5.718
N71 G1 X25.1
N73 G1 Y-9.4
N75 G1 X14.
N77 G1 Y-13.2
N79 G1 X12.5
N81 G2 X11.475 Y-15.95 R4.2
N83 G2 X12.353 Y-17.6 R4.2
N85 G1 X26.6
N87 G1 Y-7.9
N89 G1 X12.5
N91 G1 Y-13.2
N93 G1 X11.
N95 G2 X8.3 Y-15.9 R2.7
N97 G1 X3.7
N99 G1 Y-16.
N101 G1 X8.3
N103 G2 X11. Y-18.7 R2.7
N105 G1 Y-18.8
N107 G3 X11.3 Y-19.1 R0.3
N109 G1 X27.8
N111 G3 X28.1 Y-18.8 R0.3
N113 G1 Y-6.7
N115 G3 X27.8 Y-6.4 R0.3
N117 G1 X11.3
N119 G3 X11. Y-6.7 R0.3
N121 G1 Y-13.2
N123 G1 Z5. F3000.
N125 G1 X115.8 Y-15.1
N127 G1 Z0.5 F1000.
N129 G1 X120.8 Z0. F85.
N131 G1 X115.8 Z-0.5
N133 G1 X120.8 Z-1.
N135 G1 X115.8 Z-1.5
N137 G1 X120.8 Z-1.75
N139 G1 Y-12.9 F175.
N141 G1 X82.2
N143 G1 Y-15.1
N145 G1 X120.8
N147 G1 X122. Y-16.6
N149 G3 X122.3 Y-16.3 R0.3
N151 G1 Y-11.7
N153 G3 X122. Y-11.4 R0.3
N155 G1 X81.
N157 G3 X80.7 Y-11.7 R0.3
N159 G1 Y-16.3
N161 G3 X81. Y-16.6 R0.3
N163 G1 X122.
N165 G1 Z5. F3000.
N167 G1 X82.5 Y-59.5
N169 G1 Z0.5 F1000.
N171 G1 Y-54.5 Z0. F85.
N173 G1 Y-59.5 Z-0.5
N175 G1 Y-54.5 Z-1.
N177 G1 Y-59.5 Z-1.5
N179 G1 Y-54.5 Z-1.75
N181 G1 Y-58.7 F175.
N183 G1 X82.8
N185 G1 Y-56.
N187 G2 X82.958 Y-54.5 R7.201
N189 G1 X82.5
N191 G1 X81. Y-53.
N193 G1 Y-60.2
N195 G1 X84.3
N197 G1 Y-56.
N199 G2 X85.153 Y-53. R5.7
N201 G1 X81.
N203 G1 X79.5 Y-51.5
N205 G1 Y-61.7
N207 G1 X85.8
N209 G1 Y-56.
N211 G2 X90. Y-51.8 R4.2
N213 G1 X94.
N215 G2 X95.8 Y-52.205 R4.2
N217 G1 Y-51.5
N219 G1 X79.5
N221 G1 X78.3 Y-50.
N223 G3 X78. Y-50.3 R0.3
N225 G1 Y-62.9
N227 G3 X78.3 Y-63.2 R0.3
N229 G1 X87.
N231 G3 X87.3 Y-62.9 R0.3
N233 G1 Y-56.
N235 G2 X90. Y-53.3 R2.7
N237 G1 X94.
N239 G2 X96.7 Y-56. R2.7
N241 G1 Y-62.9
N243 G3 X97. Y-63.2 R0.3
N245 G1 X124.
N247 G3 X124.3 Y-62.9 R0.3
N249 G1 Y-61.3
N251 G3 X124. Y-61. R0.3
N253 G1 X100.
N255 G2 X97.3 Y-58.3 R2.7
N257 G1 Y-50.3
N259 G3 X97. Y-50. R0.3
N261 G1 X78.3
N263 G1 Z5. F3000.
N265 G1 X36.2 Y-10.5
N267 G1 Z-1.25 F1000.
N269 G1 X71. Z-3.5 F85.
N271 G3 Y-9.9 R0.3 F175.
N273 G1 X36.2
N275 G3 Y-10.5 R0.3
N277 G1 X71.
N279 G1 Z5. F3000.
N281 G1 X17. Y-8.1
N283 G1 Z-1.25 F1000.
N285 G1 Y-13.1 Z-1.75 F85.
N287 G1 Y-8.1 Z-2.25
N289 G1 Y-13.1 Z-2.75
N291 G1 Y-8.1 Z-3.25
N293 G1 Y-13.1 Z-3.5
N295 G1 X22.1 F175.
N297 G1 Y-12.4
N299 G1 X17.
N301 G1 Y-13.1
N303 G1 X15.363 Y-14.6
N305 G1 X23.6
N307 G1 Y-10.9
N309 G1 X15.5
N311 G1 Y-13.2
N313 G2 X15.363 Y-14.6 R7.201
N315 G1 X14. Y-13.2
N317 G2 X13.293 Y-15.95 R5.7
N319 G2 X13.373 Y-16.1 R5.718
N321 G1 X25.1
N323 G1 Y-9.4
N325 G1 X14.
N327 G1 Y-13.2
N329 G1 X12.5
N331 G2 X11.475 Y-15.95 R4.2
N333 G2 X12.353 Y-17.6 R4.2
N335 G1 X26.6
N337 G1 Y-7.9
N339 G1 X12.5
N341 G1 Y-13.2
N343 G1 X11.
N345 G2 X8.3 Y-15.9 R2.7
N347 G1 X3.7
N349 G1 Y-16.
N351 G1 X8.3
N353 G2 X11. Y-18.7 R2.7
N355 G1 Y-18.8
N357 G3 X11.3 Y-19.1 R0.3
N359 G1 X27.8
N361 G3 X28.1 Y-18.8 R0.3
N363 G1 Y-6.7
N365 G3 X27.8 Y-6.4 R0.3
N367 G1 X11.3
N369 G3 X11. Y-6.7 R0.3
N371 G1 Y-13.2
N373 G1 Z5. F3000.
N375 G1 X115.8 Y-15.1
N377 G1 Z-1.25 F1000.
N379 G1 X120.8 Z-1.75 F85.
N381 G1 X115.8 Z-2.25
N383 G1 X120.8 Z-2.75
N385 G1 X115.8 Z-3.25
N387 G1 X120.8 Z-3.5
N389 G1 Y-12.9 F175.
N391 G1 X82.2
N393 G1 Y-15.1
N395 G1 X120.8
N397 G1 X122. Y-16.6
N399 G3 X122.3 Y-16.3 R0.3
N401 G1 Y-11.7
N403 G3 X122. Y-11.4 R0.3
N405 G1 X81.
N407 G3 X80.7 Y-11.7 R0.3
N409 G1 Y-16.3
N411 G3 X81. Y-16.6 R0.3
N413 G1 X122.
N415 G1 Z5. F3000.
N417 G1 X82.5 Y-59.5
N419 G1 Z-1.25 F1000.
N421 G1 Y-54.5 Z-1.75 F85.
N423 G1 Y-59.5 Z-2.25
N425 G1 Y-54.5 Z-2.75
N427 G1 Y-59.5 Z-3.25
N429 G1 Y-54.5 Z-3.5
N431 G1 Y-58.7 F175.
N433 G1 X82.8
N435 G1 Y-56.
N437 G2 X82.958 Y-54.5 R7.201
N439 G1 X82.5
N441 G1 X81. Y-53.
N443 G1 Y-60.2
N445 G1 X84.3
N447 G1 Y-56.
N449 G2 X85.153 Y-53. R5.7
N451 G1 X81.
N453 G1 X79.5 Y-51.5
N455 G1 Y-61.7
N457 G1 X85.8
N459 G1 Y-56.
N461 G2 X90. Y-51.8 R4.2
N463 G1 X94.
N465 G2 X95.8 Y-52.205 R4.2
N467 G1 Y-51.5
N469 G1 X79.5
N471 G1 X78.3 Y-50.
N473 G3 X78. Y-50.3 R0.3
N475 G1 Y-62.9
N477 G3 X78.3 Y-63.2 R0.3
N479 G1 X87.
N481 G3 X87.3 Y-62.9 R0.3
N483 G1 Y-56.
N485 G2 X90. Y-53.3 R2.7
N487 G1 X94.
N489 G2 X96.7 Y-56. R2.7
N491 G1 Y-62.9
N493 G3 X97. Y-63.2 R0.3
N495 G1 X124.
N497 G3 X124.3 Y-62.9 R0.3
N499 G1 Y-61.3
N501 G3 X124. Y-61. R0.3
N503 G1 X100.
N505 G2 X97.3 Y-58.3 R2.7
N507 G1 Y-50.3
N509 G3 X97. Y-50. R0.3
N511 G1 X78.3
N513 G1 Z5. F3000.
N515 G1 X36.2 Y-10.5
N517 G1 Z-3. F1000.
N519 G1 X71. Z-5.2 F85.
N521 G3 Y-9.9 R0.3 F175.
N523 G1 X36.2
N525 G3 Y-10.5 R0.3
N527 G1 X71.
N529 G1 Z5. F3000.
N531 G1 X17. Y-8.1
N533 G1 Z-3. F1000.
N535 G1 Y-13.1 Z-3.5 F85.
N537 G1 Y-8.1 Z-4.
N539 G1 Y-13.1 Z-4.5
N541 G1 Y-8.1 Z-5.
N543 G1 Y-13.1 Z-5.2
N545 G1 X22.1 F175.
N547 G1 Y-12.4
N549 G1 X17.
N551 G1 Y-13.1
N553 G1 X15.363 Y-14.6
N555 G1 X23.6
N557 G1 Y-10.9
N559 G1 X15.5
N561 G1 Y-13.2
N563 G2 X15.363 Y-14.6 R7.201
N565 G1 X14. Y-13.2
N567 G2 X13.293 Y-15.95 R5.7
N569 G2 X13.373 Y-16.1 R5.718
N571 G1 X25.1
N573 G1 Y-9.4
N575 G1 X14.
N577 G1 Y-13.2
N579 G1 X12.5
N581 G2 X11.475 Y-15.95 R4.2
N583 G2 X12.353 Y-17.6 R4.2
N585 G1 X26.6
N587 G1 Y-7.9
N589 G1 X12.5
N591 G1 Y-13.2
N593 G1 X11.
N595 G2 X8.3 Y-15.9 R2.7
N597 G1 X3.7
N599 G1 Y-16.
N601 G1 X8.3
N603 G2 X11. Y-18.7 R2.7
N605 G1 Y-18.8
N607 G3 X11.3 Y-19.1 R0.3
N609 G1 X27.8
N611 G3 X28.1 Y-18.8 R0.3
N613 G1 Y-6.7
N615 G3 X27.8 Y-6.4 R0.3
N617 G1 X11.3
N619 G3 X11. Y-6.7 R0.3
N621 G1 Y-13.2
N623 G1 Z5. F3000.
N625 G1 X115.8 Y-15.1
N627 G1 Z-3. F1000.
N629 G1 X120.8 Z-3.5 F85.
N631 G1 X115.8 Z-4.
N633 G1 X120.8 Z-4.5
N635 G1 X115.8 Z-5.
N637 G1 X120.8 Z-5.2
N639 G1 Y-12.9 F175.
N641 G1 X82.2
N643 G1 Y-15.1
N645 G1 X120.8
N647 G1 X122. Y-16.6
N649 G3 X122.3 Y-16.3 R0.3
N651 G1 Y-11.7
N653 G3 X122. Y-11.4 R0.3
N655 G1 X81.
N657 G3 X80.7 Y-11.7 R0.3
N659 G1 Y-16.3
N661 G3 X81. Y-16.6 R0.3
N663 G1 X122.
N665 G1 Z5. F3000.
N667 G1 X82.5 Y-59.5
N669 G1 Z-3. F1000.
N671 G1 Y-54.5 Z-3.5 F85.
N673 G1 Y-59.5 Z-4.
N675 G1 Y-54.5 Z-4.5
N677 G1 Y-59.5 Z-5.
N679 G1 Y-54.5 Z-5.2
N681 G1 Y-58.7 F175.
N683 G1 X82.8
N685 G1 Y-56.
N687 G2 X82.958 Y-54.5 R7.201
N689 G1 X82.5
N691 G1 X81. Y-53.
N693 G1 Y-60.2
N695 G1 X84.3
N697 G1 Y-56.
N699 G2 X85.153 Y-53. R5.7
N701 G1 X81.
N703 G1 X79.5 Y-51.5
N705 G1 Y-61.7
N707 G1 X85.8
N709 G1 Y-56.
N711 G2 X90. Y-51.8 R4.2
N713 G1 X94.
N715 G2 X95.8 Y-52.205 R4.2
N717 G1 Y-51.5
N719 G1 X79.5
N721 G1 X78.3 Y-50.
N723 G3 X78. Y-50.3 R0.3
N725 G1 Y-62.9
N727 G3 X78.3 Y-63.2 R0.3
N729 G1 X87.
N731 G3 X87.3 Y-62.9 R0.3
N733 G1 Y-56.
N735 G2 X90. Y-53.3 R2.7
N737 G1 X94.
N739 G2 X96.7 Y-56. R2.7
N741 G1 Y-62.9
N743 G3 X97. Y-63.2 R0.3
N745 G1 X124.
N747 G3 X124.3 Y-62.9 R0.3
N749 G1 Y-61.3
N751 G3 X124. Y-61. R0.3
N753 G1 X100.
N755 G2 X97.3 Y-58.3 R2.7
N757 G1 Y-50.3
N759 G3 X97. Y-50. R0.3
N761 G1 X78.3
N763 G1 Z5. F3000.
(Kontur tsent Pripusk=0 Z=-5.2 DZ=5.2)
N13 G1 X84.888 Y-50.05
N17 G1 Z0.5 F1000.
N19 G1 Z-5.2 F85.
N21 G1 G41 D03 X86.833 Y-48.106 F175.
N23 G3 X84.888 Y-47.3 R2.75
N25 G1 X78.3
N27 G3 X75.3 Y-50.3 R3.
N29 G1 Y-62.9
N31 G3 X78.3 Y-65.9 R3.
N33 G1 X87.
N35 G3 X90. Y-62.9 R3.
N37 G1 Y-56.
N39 G1 X94.
N41 G1 Y-62.9
N43 G3 X97. Y-65.9 R3.
N45 G1 X124.
N47 G3 X127. Y-62.9 R3.
N49 G1 Y-61.3
N51 G3 X124. Y-58.3 R3.
N53 G1 X100.
N55 G1 Y-50.3
N57 G3 X97. Y-47.3 R3.
N59 G1 X84.888
N61 G3 X82.944 Y-48.106 R2.75
N63 G1 G40 X84.888 Y-50.05
N65 G1 Z5. F3000.
N67 G1 X90.382 Y-11.45
N69 G1 Z0.5 F1000.
N71 G1 Z-5.2 F85.
N73 G1 G41 D03 X92.327 Y-9.506 F175.
N75 G3 X90.382 Y-8.7 R2.75
N77 G1 X81.
N79 G3 X78. Y-11.7 R3.
N81 G1 Y-16.3
N83 G3 X81. Y-19.3 R3.
N85 G1 X122.
N87 G3 X125. Y-16.3 R3.
N89 G1 Y-11.7
N91 G3 X122. Y-8.7 R3.
N93 G1 X90.382
N95 G3 X88.438 Y-9.506 R2.75
N97 G1 G40 X90.382 Y-11.45
N99 G1 Z5. F3000.
N101 G1 X28.05 Y-9.7
N103 G1 Z0.5 F1000.
N105 G1 Z-5.2 F85.
N107 G1 G41 D03 X29.994 Y-11.645 F175.
N109 G3 X30.8 Y-9.7 R2.75
N111 G1 Y-6.7
N113 G3 X27.8 Y-3.7 R3.
N115 G1 X11.3
N117 G3 X8.3 Y-6.7 R3.
N119 G1 Y-13.2
N121 G1 X3.5
N123 G3 X1. Y-15.7 R2.51
N125 G1 Y-16.2
N127 G3 X3.5 Y-18.7 R2.51
N129 G1 X8.3
N131 G1 Y-18.8
N133 G3 X11.3 Y-21.8 R3.
N135 G1 X27.8
N137 G3 X30.8 Y-18.8 R3.
N139 G1 Y-9.7
N141 G3 X29.994 Y-7.755 R2.75
N143 G1 G40 X28.05 Y-9.7
N145 G1 Z5. F3000.
N147 G1 X49.217 Y-9.95
N149 G1 Z0.5 F1000.
N151 G1 Z-5.2 F85.
N153 G1 G41 D03 X51.162 Y-8.005 F175.
N155 G3 X49.217 Y-7.2 R2.75
N157 G1 X36.2
N159 G3 Y-13.2 R3.
N161 G1 X71.
N163 G3 Y-7.2 R3.
N165 G1 X49.217
N167 G3 X47.273 Y-8.005 R2.75
N169 G1 G40 X49.217 Y-9.95
N171 G1 Z5. F3000. M09
G00 Z250. M05
M1
думаете не совпадает диаметры инструмента в программе и в офф сете станка потому и ошибка вылазит?
Изменено 10 декабря 2014 пользователем Brehor
-
01-26-2011, 01:25 PM
#1
Registered
I am trying to use TNR compensation while machine on a fanuc controlled lathe, but keep receiving an error that states: PS0041 interference G41/G42…
What am I doing wrong?Heres my program:
G28 U0 W0
G50 S625
G96 S500 M4 M8 M42;
T101;
G0 X15.02 Z.3;
G1 Z-1.73 F.013;
G0 X15.1 Z.01;
G1 X9.76 F.013;
G0 Z3.52;
X7.;
G72 W1300 R.025;
G72 P10 Q11 F.013;
N10 G0 Z3.31;
N11 G1 X5. F.013;
G0 X6.66 Z3.5;
G1 G42 X6.65 Z3.31 F.013;
G2 X6.698 Z2.702 R.25 F.01;
G1 X9.125 Z.153;
G2 X9.576 Z.01 R.25 F.01;
G0 Z7.;
G0 G40 X15. Z10.;
G28 U0 W0;
M30;
%
-
01-26-2011, 04:38 PM
#2
Can you post a drawing of this part? I’ve tried to draw it up, but it doesn’t look right.
-
01-26-2011, 05:00 PM
#3
Community Moderator
Is it the distance error from engaging the G42 to the point of the first move inadequate?
i.e. less than the tool radius?
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
01-26-2011, 05:54 PM
#4
Without seeing your part, I think the problem may be the Z7.0 move after the last arc. I would try adding a line to give room for TNR comp. Also, the first G2 doesn’t look like it’s right.
G72 W1300 R.025;
G72 P10 Q11 F.013;
N10 G0 Z3.31;
N11 G1 X5. F.013;
G0 X6.66 Z3.5;
G1 G42 X6.65 Z3.31 F.013;
G2 X6.698 Z2.702 R.25 F.01; < the distance from the start point to end point of this arc is 0.6085 R.25 won’t reach.
G1 X9.125 Z.153;
G2 X9.576 Z.01 R.25 F.01;
G1 X9.776 W-0.0001 < I think you need to add a line here to provide room for TNR
G0 Z7.;
G0 G40 X15. Z10.;
Fusion 360 Support
Report issues, bugs, and or unexpected behaviors you’re seeing. Share Fusion 360 issues here and get support from the community as well as the Fusion 360 team.
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Search instead for
Did you mean:
-
Back to forum -
Previous -
Next
3815 Views, 16 Replies
06-09-2021
09:33 AM
PS0041 Interference in G41/G42!
I am using generic Fanuc turning post and whenever I try chamfers and/or fillets for my parts my machine always gives me an error saying interference in G41/G42. I am sure I am a newbie at this but I wanted to learn and see why this is exactly not allowing me to put chamfers on my parts. If post it without keeping «In control» it runs beautifully with all the chamfers in places. Any help is appreciated.
Thanks!
- Fanuc
- Fusion360
- post processor
-
Back to forum -
Previous -
Next
16 REPLIES 16
06-09-2021
08:36 PM
Edit: Controller Fanuc oi-tf.
06-10-2021
02:24 AM
HI @saurabh.salat ,
This could be due to following reasons,
- Your tool corner radius more than the minimum radius
- In the controller Tooloffset, the Imaginary tool Different than the CAM
- Less distance error from engaging the G42 to the point of the first move
Thanks,
Krupal Vala
Senior Technology Consultant — Post Processor & Machine Simulation
06-10-2021
09:50 PM
Hello @KrupalVala thanks for your input.
1). I am doing a chamfer which is on outer body so the minimum tool radius should not matter
2). I checked my controller and the data there seems to be fine meaning it is the same as in Fusion.
3). I am unsure what this is, can you please elaborate the minimum distance error?
Thanks!
06-10-2021
10:56 PM
Hi @saurabh.salat
Try with Lead in lead out distance. Keep it more than the Corner radius.
Thanks,
Krupal Vala
Senior Technology Consultant — Post Processor & Machine Simulation
06-10-2021
11:42 PM
It is greater than Nose Radius, my lead in and lead out are set at 2mm while my nose radius is 0.8mm.
06-13-2021
09:56 PM
@KrupalVala, I checked again and there is only one operation which gives me this error. I tried giving tangential extension, I removed the chamfer and I also increased lead in and lead out distances but still it gave me that error.
06-13-2021
10:09 PM
Hi @saurabh.salat ,
Could Please share your Fusion360 CAM project here? So some CAM experts can guide you if needed.
Thanks,
Krupal Vala
Senior Technology Consultant — Post Processor & Machine Simulation
06-13-2021
11:59 PM
@KrupalVala I can’t in public forum but if you send me a private message I can surely share the file.
Thanks!
06-15-2021
09:35 PM
@KrupalValais there an email or any other way to share my file rather than sharing it on public forum?
Please let me know what can be done.
Thanks!
06-15-2021
09:58 PM
HI @seth.madore,
Could you please look it to this case? I think the error is related to toolpath or controller end.
Thanks,
Krupal Vala
Senior Technology Consultant — Post Processor & Machine Simulation
06-16-2021
02:53 AM
@saurabh.salat could you email me the project?
seth dot madore at autodesk dot com
In your NC code, which toolpath was giving this error, and what post processor are you using?
06-28-2021
10:01 PM
Hello Seth,
I have emailed you the file a couple of days back and explained in which operation I am facing this particular issue.
Thanks!
Saurabh Salat.
07-14-2021
10:42 PM
@seth.madore and @KrupalVala is someone looking into this still?
It’s been a month and I see no updates on this. Please solve this issue.
Thanks.
07-15-2021
01:50 AM
Hi @saurabh.salat ,
In this case they will guide you. I suggest you to contact the controller manufacturer. Please let us know if you find any interesting or need to implement in the postprocessor or CAM.
@seth.madore Did you find something in the given project that could cause an error?
Thanks,
Krupal Vala
Senior Technology Consultant — Post Processor & Machine Simulation
-
Back to forum -
Previous -
Next
-
#2
PS0041 Overcutting will occur in tool nose radius compensation. Modify the program.
I am not a macro guy but I think it is puking line N190 its only dropping down .003 before it starts the next chamfer. Sometimes comp will aggravate the hell out of me. I may be wrong but my money is on line N190. Remove it and see if it runs.
Brent
Last edited: Jan 13, 2015
-
#3
Hello Eric,
Brent’s suggestion in Post #2 is correct when there is a 45deg move, as is the case in you example, following Block N190. The radial move from the previous diameter to X[#1+.02] is only 0.0015″. With the 45deg angle move that follows, the smallest this move can be is 0.00914 when using a 0.0156 tool nose radius. In fact this will probably still raise an interference error, as Facuc controls generally need clearance of the Least Programmable Increment in TNR comp calcuations. Accordingly, 0.0092 would probably be the minimum move in the case of your program.
If the Block following N190 was parallel to the Z axis, then the control will accept the N190 move as there will be no Interference. The Interference is caused by the control needing to position the TNR tangent to the surface described by N190 (perpendicular to the Z axis) and the angled surface described by the N200 block. The position of the TNR to achieve this tangency will result in interference with the X1.002 diameter.
It would seem that you have a constant diameter of X1.002 included in your profile description. If you wanted to make the program more bullet proof, you could carry out a calculation shortly after the Macro Variables are set to determine if the N190 Block move is less than 0.0092 (radial value). If yes, the N190 Block could be skipped. In this case, there would be further calculations required to find the start of the angled surface, based on its specified end point (not difficult).
Regards,
Bill
Last edited: Jan 13, 2015