1. Error Codes: ALM/A-*
Probable Cause
- Faulty water inlet
-
Check water input pressure.
-
Check manual water inlet valves.
-
Check the status of electro valve
-
- Defect in the electro valves
- Call Service.
- Defect in the level control system
- Call Service.
2. Error Codes: ALM/E-*
Probable Cause
-
Machines with pump drain: obstruction of the draining pump
- Check the status of the washing bath’s output hoses
- Call Service
-
Anomaly in the drain system
-
Check the status of the washing bath’s output hoses.
-
-
Erroneous drain configuration
- Call Service
3. Codes: ALM/HOT
Probable Cause
- Inadequate stop of the washing machine with bath at high temperature
-
Close the door of the washing machine to allow opening of cold water valve. Press STOP key to drain the bath and access to the door opening. Repeat this operation until the alarm report disappears.
-
- Excess of temperature with machine stopped.
- If the alarm report does not disappear after five attempts, disconnect the general power supply and close water inlet manual valves.
- Anomaly in the heating system
- Call Service
4. Error Codes: ALM/L
Probable Cause
- Leakage in the electrovalve
- Bath level with machine idle
Close manual water inlet valves Or Call Service
5. Error Codes: ALM/SL
Probable Cause
- Bath level exceeded
Close manual water inlet valves Or Call Service
6. Girbau Washing Machine Error Codes: ALM/C
Probable Cause
- Defect in the temperature probe
- Erroneous heating configuration
- Defect in the heating circuit.
Call Service
7. Error Codes: ALM/Probe
Probable Cause
- Defect in the temperature probe
Call Service
8. Girbau Washer Fault: ALM/BAL
Probable Cause
- Defect in the unbalance control switch
Call Service
7. Girbau Washer Fault: ALM/VAR
Probable Cause
-
Disconnection of the motor’s thermal protection.
-
Alarm set off by the inverter
Call Service
8. Girbau Washer Code: ALM Door
Probable Cause
-
Door Lock Fault : Chek Dor Lock
- Call Service
9. Girbau Washing Machine Error Codes: HOT
Probable Cause
- Interruption of the program by STOP key with bath at high temperature
The washing machine will automatically accept cold water and will not allow door unlock.
When the bath temperature is below 45ºC (133F) the bath will drain and the safety door lock will be unlocked.
10. Girbau Washing Machine Display Error Code: Door
Probable Cause
- Dor not closed properly
Open and Close washing machine door
Girbau Washing Machine Operation Manual
LOGI PRO CONTROL
- Six water levels can be selected.
- Connection to an external dosing system.
- Adjustable length of dosing signal.
- Simultaneous dosing of two products.
- Failure check and alarm messages. Test program.
- Just in Load proportional water and detergent consumption depending on the load.
- Rinse Hold crease-guard mode stop.
- Starting up at the desired time.
- A gradual cool-down.
- Consulting the operation parameters of the running program.
LOGI CONTROL
- 8 configurable programs.
- Up to 9 phases per program.
- Four water levels can be selected.
- Connection to an external dosing system.
- Failure check and alarm messages.
- Test program.
- Rinse Hold crease-guard mode stop (in the final phase only).
- Starting up at the desired time.
- Gradual cool-down (in the wash phase only).
RMS/RMG628, REM/RMG070 HS-6023, HS-6024, HS-6040, HS-6057, HS-6110, EH055, EH060, EH090, EH130, EH255
Seeing an error code on your Girbau machine but don’t know what it means? Have a look at our code guide below.
Model: HS-5008
| Fault Code | Fault |
| ALM/A-* |
FAULTY WATER INLET / SLOW FILL |
| ALM/E |
MACHINES WITH PUMP DRAIN BLOCKED DRAIN/PUMP |
| ALM/L |
LEAKAGE IN THE ELECTROVALVE(failed level sensor) |
| ALM/SL |
BATH LEVEL EXCEEDED |
| ALM/C |
DEFECT IN TEMP PROBE/DEFECT IN HEATING CIRCUIT |
| ALM/Prob |
DEFECT IN TEMP PROBE |
| ALM/BAL |
DEFECT IN THE UNBLANCE CONTROL SWITCH (OPEN CIRCUIT) |
| ALM/VAR* |
INVERTER ALARMS.SEE INVERTER FAULT CODES |
| VARO |
COMMUNICATION ALARM BETWEEN INVERTER AND MICROPROCESSOR FAULTY INVERTER SUPPLY, FAULTY WIRING BETWEEN MICROPROCESSOR |
| VAR1 |
DISCONNECTION OF INVERTER BY SELF-PROTECTION,IF THE ALARM IS PERMANENT INDICATES INVERTER BREAKDOWN |
| VAR2 |
FAILURE ON THE COMMUNICTION SYSTEM DETECTED BY THE INVERTER INVERTER BREAK DOWN, MICROPROCESSOR BREAK DOWN |
| VAR3 |
OVER CURRENT IN INVERTER MECHANICAL OBSTRUCTION OF THE TRANSMISSION SYSTEM FAULTY INVERTER SUPPLY FAULTY WIRING OR CONN TO MOTOR FAULTY MOTOR FAULTY INVERTER |
| VAR4 |
DISCONNECTION OF MOTOR KLIXON MOTOR KILXON OPEN FAULTY INVERTER |
| VAR5 |
OVER VOLTAGE IN INVERTER DC LINT CIRCUIT FAULTY INVERTER SUPPLY INVERTER BREAK DOWN |
| VAR6 |
OVERHEATING IN INVERTER INVERTER FAN BREAKDOWN/INVERTER |
| VAR7 |
FAILURE IN INVERTER FAULTY INVERTER |
| VAR8 |
INVERTER BREAKDOWN |
Need assistance with your Girbau machine? Call us now on [ld_default] to book an engineer. We’re always here to help
User Manuals, Guides and Specifications for your GIRBAU HS-4022 Washer. Database contains 1 GIRBAU HS-4022 Manuals (available for free online viewing or downloading in PDF): Operation instructions manual .
Посмотреть инструкция для Girbau HS-3022 бесплатно. Руководство относится к категории стиральные машины, 1 человек(а) дали ему среднюю оценку 8.3. Руководство доступно на следующих языках: -. У вас есть вопрос о Girbau HS-3022 или вам нужна помощь? Задайте свой вопрос здесь
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Girbau HS-3022.
При какой температуре следует стирать одежду?
Стоит ли использовать средство для удаления накипи при стирке в стиральной машине?
Как предотвратить появление неприятного запаха в стиральной машине?
Инструкция Girbau HS-3022 доступно в русский?
Не нашли свой вопрос? Задайте свой вопрос здесь
Specifications:1258/1258847-hs6008.pdf file (01 Dec 2022) |
Accompanying Data:
GIRBAU HS-6008 Controller, Control Unit PDF Advanced Operation Instructions (Updated: Thursday 1st of December 2022 04:29:38 AM)
Rating: 4.8 (rated by 29 users)
Compatible devices: LOGI CONTROL, HS-5008, RMS610, RMS6 Series, HS-6013, HS-4055, RMS628, HS-6040.
Recommended Documentation:
Text of Advanced Operation Instructions
(Ocr-Read Version Summary of Contents, UPD: 01 December 2022)
-
17, Cod. 429704 Rev. 02/0606 17 Advanced Mode 4.1.1. Setting clock time and day of the week. Access to the MODIFICATION menu. Section 3.1. Display shows Pro. Press key 2 seven times. In the display reports CASH, DEMO, INFO, Mod, Ncod, CALE, Hour are showed successively. Push the 1 key. The display shows SURE. (Access confirmation to time modification…
-
9, Cod. 429704 Rev. 02/0606 9 Advanced Mode 3.2.8. Modification of a program Access the MODIFICATION mode (section 3.1) The display will indicate Pro. Press the 1 key to access the PROGRAMMING menu. The display will indicate Pr-1. Ready to modify program 1. The 2 / 4 keys are used to select another program. Press the 1 key to access the modification of t…
-
1, GIRBAU HS-6008 Cod. 429704 Rev. 02/0606 Advanced Operation Instructions for washers COIN CONTROL GIRBAU, S.A. Crta de Manlleu, km. 1 08500 VIC (Barcelona) • SPAIN Tel. 34 93 8861100 Fax 34 93 8860785 [email protected] www.girbau.com For USA & CANADA: CONTINENTAL GIRBAU Inc. 2500 State Road 44 WI 54904 Oshkosh • USA Tel. 1(920) 231-8…
-
6, Cod. 429704 Rev. 02/0606 6 Advanced Mode 3.2.2. Default program contents. CE Configuration HS & MS models Pr — 1. SUPER WASH 31 min. Pr — 2. COLOR FAST. PERM. PRESS 31 min. Ph Ph L C d r rt E Et Ph Ph L C d r rt E Et 1 N 2 — — — 1 1 3 2 2 1 N 2 — — — 1 1 3 2 2 2 Y 1 60 2 1 10 1 1…
-
12, Cod. 429704 Rev. 02/0606 12 Advanced Mode 3.4. DEMO menu. Operating mode with program accelerator It allows executing one of the four COIN programs with the possibility of reducing the program time. Program to facilitate maintenance interventions and preparation of programs. 3.4.1. Execution of a program in DEMO mode. Access the MODIFICATION mode. Section 3.1. D…
-
14, Cod. 429704 Rev. 02/0606 14 Advanced Mode External dosing Adapts the operation of the control panel leds to the washer operation. Option Ed-1 has to be programmed only if washer uses wash products form an external dosing installation. OPTIONS MEANING Ed-0 Units with external dosing unavailable Ed-1 Units with external dosing available The 2 / 4…
-
15, GIRBAU HS-6008 Cod. 429704 Rev. 02/0606 15 Advanced Mode OPTIONS MEANING SP-0 Without suds prevention SP-1 First level of suds prevention SP-2 Second level of suds prevention SP-3 Third level of suds prevention The 2 / 4 keys allow the modification of the option displayed. The 1 key validates the selection on the display and permits the access to …
-
7, GIRBAU HS-6008 Cod. 429704 Rev. 02/0606 7 Advanced Mode 3.2.4. Default program contents. USA Configuration Models EH020 & EM025. SP-I, SP-2, SP-3. Pr — 1. SUPER WASH 32 min. Pr — 2. WHITE 28 min. Ph Ph L F d r rt E Et Ph Ph L F d r rt E Et 1 Y 2 — — — 1 2 2 2 2 1 Y 2 — — — 1 2 2 2 2 2 Y 2 80 2 1 7 2 2 …
-
10, Cod. 429704 Rev. 02/0606 10 Advanced Mode Dosing. Permits to activate or deactivate dosing that appear in the master table. OPTIONS MEANING d-0 Without dosing d-1 Dosing of pre-wash detergent d-2 Dosing of wash detergent d-3 Dosing of bleach d-4 Dosing of softener or neutraliser n.p. Not possible to program dosing in phase Dosings d-…
-
16, Cod. 429704 Rev. 02/0606 16 Advanced Mode 3.7. Ncod menu. Modification of the access code to MODIFICATION mode. As it is described in section 3.1, the access to MODIFICATION mode is restricted with an access code. This code can be modified by the user if he wants to. It must always contain a combination of EIGHT keys. Access code modification. Access the MODIFICAT…
GIRBAU HS-6008 Recommended Instructions:
RM-NX7000, E30MO75HP, ARC-787D-1NG, Transtube 112/212 EFX, LE15S51BP, 463621612
-
LG
WM2350HSC
OWNER’S MANUALWASHING MACHINEWM2350H*CPlease read this manual carefully before operatingyour washing machine and retain it for future reference.P/NO : MFL62526846www.lg.comENGLISHESPAÑOL FRANÇAISMFL62526846_en_101116.indd 1 2010.11.16 10:58:54 AM …
WM2350HSC 108
-
Hitachi
NW-80AS
USER MANUAL使用說明書 HITACHI FULLY AUTOMATIC WASHING MACHINE日立全自動洗衣機Model NW-80ASThank you for your purchase of HITACHI Fully Automatic Washing Machine.• Please read this manual carefully for proper operation.• Please keep this manual for future reference.承蒙您選購日立的全自動洗衣機，謹此致衷心謝意。 • 請細閱本說明書，以便正� …
NW-80AS 56
-
Toshiba
AW-SD150UBPE
FULLY AUTOMATICWASHING MACHINEAW-SD150UBPE AW-SD130UBPEThank you for purchasing TOSHIBA Fully Automatic Washing Machine.Please read this manual carefully in order to operate the machine properly.CONTENTSWARNING …………………………………….. 2CAUTION ………………………………….. 2~3DESCRIPTION OF PARTS ……………… 3CONTROL PANEL DESCRIPTION ……………….. …
AW-SD150UBPE 18
-
Ariston
AQUALTIS AQ9F 29 U
EN1ContentsInstallation, 2-3Unpacking and levellingConnecting the electricity and water suppliesTechnical dataDescription of the machine, 4-5Control panelRunning a wash cycle, 6Wash cycles and options, 7Table of wash cyclesWash optionsDetergents and laundry, 8DetergentPreparing the laundryWashing recommendationsLoad balancing systemPrecautions and advice, 9General safetyDisposalOpening t …
AQUALTIS AQ9F 29 U 24
-
GE
WCVH4800K
GEAppliances.comSafety Instructions …………. 2, ]Operating InstructionsControl Panel ……………………. 4Control Settings ……………….. 5-7Features ………………………… 8Loading and Using the Washer ….. 9-12Installation Instructions ….. 13-18Drain Requirements ……………… 16Electrical Requirements …………… 16Gro …
WCVH4800K 76
-
Maytag
3953952
EASY-TO-USE AUTOMATIC WASHERSUse & Care GuideFor questions about features, operation/performance,parts, accessories or service call: 1-800-253-1301In Canada, for assistance call: 1-800-461-5681, for installation and service call: 1-800-807-6777 or visit our website atwww.whirlpool.com or www.whirlpool.com/canadaTable of Contents…………………………………………….. …
3953952 12
-
Indesit
IWD 7105
GB1ContentsInstallation, 2-3Unpacking and levellingConnecting the electricity and water suppliesThe first wash cycleTechnical dataDescription of the washing machineand starting a wash cycle, 4-5Control panelIndicator lightsStarting a wash cycleWash cycles, 6Table of wash cyclesPersonalisation, 7Setting the temperatureSetting the spin speedFunctionsDetergents and laundry, 8Detergent dispens …
IWD 7105 12