Код 0x80080005 microsoft store ошибка

Обновление операционной системы Виндовс 10 – привычный для всех пользователей процесс. При установке обновления Creators Update владельцы ПК нередко сталкиваются с ошибкой 0x80080005, после которой завершить операцию не удается. Появившаяся проблема препятствует поиску и инсталляции обновлений, в которых содержатся улучшения, новый функционал ОС. Поэтому юзеры ищут ответы на вопрос, как исправить ошибку 0x80080005 в Центре обновления Windows 10.

Возможные причины неполадки

Возникновение ошибки с цифровым обозначением 0x80080005-0x90018 ограничивает возможности гаджета, делает систему уязвимой перед вирусными угрозами. Пользователь сталкивается с ограничением функционала устройства, это доставляет проблемы в работе. Последствия такой ошибки носят разный характер, способны привести к еще более серьезным проблемам в работе компьютера. Поэтому важно своевременно выявить источник неполадки и устранить его.

Причины появления сбоя:

• вирусные атаки в системе, которые ограничивают работу Центра обновления;
• неправильные настройки основных компонентов системы;
• сбой во время загрузки, инсталляции или удаления приложений;
• поврежденные системные файлы;
• сбой во время выключения ПК;
• поврежденные или устаревшие драйверы;
• проблемы с настройками интернет-сети.

Подобный код ошибки может возникнуть в десятой версии Винды и более ранних выпусках ОС. Для устранения сбоя необходимо выявить причину его появления.

Как исправить ошибку 0x80080005 в Центре обновления Windows 10

Для исправления сбоя пользователь вручную должен изменить настройки, выполнить проверку на наличие вирусов, поврежденных файлов и других дефектов. Прежде чем переходить к радикальным методам, можно начать действовать с простых решений данного вопроса.

Отключение антивирусного ПО

Центр обновления в Виндовс 10 может блокироваться антивирусными программами, установленными на компьютере. Они могут повреждать или даже удалять компоненты обновлений. Для решения проблемы пользователю нужно отключить антивирусное ПО перед установкой обновлений.

Для отключения защитной программы понадобится выполнить следующее:

• Зайти в меню Пуск.

• Найти в списке и нажать на раздел «Центр безопасности Защитника Windows».

• Выбрать в меню пункт «Защита от вирусов и угроз».

• Перейти в раздел «Параметры».
• Передвинуть выключатель в положение «Выключено» рядом со строкой «Защита в режиме реального времени».

После этого антивирус будет временно отключен и не помешает действиям, которые блокировала программа. Для включения защитного средства пользователю понадобится выполнить те же действия, только переставить выключатель в положение «Включено». Если временное отключение антивирусного ПО не помогло, тогда понадобится удаление приложения полностью.

Проверка и исправление повреждений файловой системы

Если системные файлы повреждены, это может негативно повлиять на установку обновлений операционки. Для устранения неполадки понадобится Командная строка. Найти и восстановить системные файлы помогут утилиты SFC и DISM.

Процесс исправления неполадок файлов системы:

• Вызвать КС с помощью горячих клавиш: «Win + R».
• Ввести команду: cmd.

• В строке набрать: sfc/scannow.
• Нажать «Enter».

После выполнения всех шагов запустится процесс сканирования файловой системы. По завершению пользователь увидит результат проверки, исправления, которые были сделаны в процессе. Нередко такой метод результативен, ошибка 0x80080005 больше не появится.

Сброс компонентов Центра обновления Windows

Этот метод считается одним из эффективных, помогает избавиться от ошибок, связанных с обновлением системы. Нередко сбой появляется по причине самого Центра обновлений, поэтому требуется сброс его компонентов.

Автоматический сброс компонентов ЦО выполняется по следующей схеме:

• Остановить службы: ЦО Виндовс, BITS, службы криптографии.

• Переименовать служебные папки catroot2, SoftwareDistribution, downloader.

• Запустить ранее остановленные службы.

• Создать текстовый документ в Блокноте с расширением .bat.

• Скопировать следующие команды и сохранить:

@echo off

REM Script to Reset Windows Updates agent

REM Stop Services

net stop bits

net stop wuauserv

net stop appidsvc

net stop cryptsvc

REM Delete the qmgr*.dat files

Del “%ALLUSERSPROFILE%Application DataMicrosoftNetworkDownloaderqmgr*.dat”

REM Rename folders

Ren %systemroot%SoftwareDistribution SoftwareDistribution.bak

Ren %systemroot%system32catroot2 catroot2.bak

REM Reset services permissions

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU

REM ReRegister services

cd /d %windir%system32

regsvr32.exe /U /s vbscript.dll

regsvr32.exe /U /s mshtml.dll

regsvr32.exe /U /s msjava.dll

regsvr32.exe /U /s msxml.dll

regsvr32.exe /U /s actxprxy.dll

regsvr32.exe /U /s shdocvw.dll

regsvr32.exe /U /s Mssip32.dll

regsvr32.exe /U /s wintrust.dll

regsvr32.exe /U /s initpki.dll

regsvr32.exe /U /s dssenh.dll

regsvr32.exe /U /s rsaenh.dll

regsvr32.exe /U /s gpkcsp.dll

regsvr32.exe /U /s sccbase.dll

regsvr32.exe /U /s slbcsp.dll

regsvr32.exe /U /s cryptdlg.dll

regsvr32.exe /U /s Urlmon.dll

regsvr32.exe /U /s Oleaut32.dll

regsvr32.exe /U /s msxml2.dll

regsvr32.exe /U /s Browseui.dll

regsvr32.exe /U /s shell32.dll

regsvr32.exe /U /s atl.dll

regsvr32.exe /U /s jscript.dll

regsvr32.exe /U /s msxml3.dll

regsvr32.exe /U /s softpub.dll

regsvr32.exe /U /s wuapi.dll

regsvr32.exe /U /s wuaueng.dll

regsvr32.exe /U /s wuaueng1.dll

regsvr32.exe /U /s wucltui.dll

regsvr32.exe /U /s wups.dll

regsvr32.exe /U /s wups2.dll

regsvr32.exe /U /s wuweb.dll

regsvr32.exe /U /s scrrun.dll

regsvr32.exe /U /s msxml6.dll

regsvr32.exe /U /s ole32.dll

regsvr32.exe /U /s qmgr.dll

regsvr32.exe /U /s qmgrprxy.dll

regsvr32.exe /U /s wucltux.dll

regsvr32.exe /U /s muweb.dll

regsvr32.exe /U /s wuwebv.dll

regsvr32.exe /s vbscript.dll

regsvr32.exe /s mshtml.dll

regsvr32.exe /s msjava.dll

regsvr32.exe /s msxml.dll

regsvr32.exe /s actxprxy.dll

regsvr32.exe /s shdocvw.dll

regsvr32.exe /s Mssip32.dll

regsvr32.exe /s wintrust.dll

regsvr32.exe /s initpki.dll

regsvr32.exe /s dssenh.dll

regsvr32.exe /s rsaenh.dll

regsvr32.exe /s gpkcsp.dll

regsvr32.exe /s sccbase.dll

regsvr32.exe /s slbcsp.dll

regsvr32.exe /s cryptdlg.dll

regsvr32.exe /s Urlmon.dll

regsvr32.exe /s Oleaut32.dll

regsvr32.exe /s msxml2.dll

regsvr32.exe /s Browseui.dll

regsvr32.exe /s shell32.dll

regsvr32.exe /s Mssip32.dll

regsvr32.exe /s atl.dll

regsvr32.exe /s jscript.dll

regsvr32.exe /s msxml3.dll

regsvr32.exe /s softpub.dll

regsvr32.exe /s wuapi.dll

regsvr32.exe /s wuaueng.dll

regsvr32.exe /s wuaueng1.dll

regsvr32.exe /s wucltui.dll

regsvr32.exe /s wups.dll

regsvr32.exe /s wups2.dll

regsvr32.exe /s wuweb.dll

regsvr32.exe /s scrrun.dll

regsvr32.exe /s msxml6.dll

regsvr32.exe /s ole32.dll

regsvr32.exe /s qmgr.dll

regsvr32.exe /s qmgrprxy.dll

regsvr32.exe /s wucltux.dll

regsvr32.exe /s muweb.dll

regsvr32.exe /s wuwebv.dll

REM reset winsock netsh winsock reset

REM reset proxy netsh winhttp reset proxy

REM restart services

net start bits

net start wuauserv

net start appidsvc

net start cryptsvc

REM Install the latest Windows Update Agent.

start http://support.microsoft.com/kb/949104.

• Открыть документ ПКМ, выбрать запуск от имени Администратора.

После будут выполнены все необходимые действия. По завершению процесса пользователь должен перезагрузить устройство. Далее нужно вновь зайти в ЦО, проверить, исчезла ли проблема.

Ручная установка скачиваемого обновления

Если в автоматическом режиме не удается выполнить обновление ОС, то может помочь установка в ручном формате. Этот способ необходимо использовать, если обычная перезагрузка ПК или отключение (удаление) антивирусного ПО не помогло решить проблему.

Выполнить ручную установку просто, следуя инструкции:

1. Зайти на официальный сайт разработчика.
2. Войти в раздел загрузок.
3. Найти, скачать и установить на ПК требуемый файл обновления.

Этот метод носит единовременный характер, так как не позволяет исправить ошибку, а лишь обходит ее. Поэтому для борьбы с неполадкой нужно искать более действенные способы.

Другие варианты

Для облегчения поиска источника проблемы опытные пользователи рекомендуют воспользоваться сторонними утилитами. Например, софт Windows Repair Tool помогает выявить источник появления ошибки 0x80080005 в «десятке» и устранить проблему.

Если программа .NET Framework 3.5 не установлена на ПК, то это может стать причиной сбоя во время обновления ОС. Скачать утилиту можно с официального источника.

Иногда переполненный реестр может спровоцировать появление такого рода ошибок. Для устранения неполадки потребуется его очистка.

Наличие вредоносных программ также может стать источником проблемы. Выявить вирусные атаки можно с помощью антивирусных ПО, установленных в Виндовс 10, или скачанных софтов с проверенных источников.

Ошибка с кодом 0x80080005 может возникнуть по разным причинам, которые устраняются одним из предложенных способов. Сбой не является критичным, но доставляет неудобства в работе, ограничивает возможность использования программы в актуальном режиме. Поэтому устранение неполадки поможет восстановить полноценную работу и функциональность Windows 10.



The speed and security of Windows 10 are heavily reliant on Windows Updates, particularly the significant upgrades that improve system stability.

Even if you wish to skip updates, you won’t be able to because Windows Updates are required. As a result, you will undoubtedly encounter a large number of windows update error codes. One example is the Windows update error 0x80080005.

Getting a Windows update error is nothing new to most users. Some quickly disappear by restarting the PC, while others require more troubleshooting.

Although not all mistakes are the same, a few keep reappearing for users with various system configurations.

In particular, Windows Update Error Code 0x80080005 has proven challenging to crack, prohibiting upgrades every time you check for new versions.

A large number of customers have reported the update problem 0x80080005. This can be a significant issue, and while we’re on the subject of this issue, here are some other issues that users have reported:

• 0x80080005 – 0x90017 error: Provides fewer details. You should be able to resolve the issue with one of our methods.
• 0x80080005 Microsoft Store error: can sometimes display when you visit the Microsoft Store
• Windows Update error code 0x80080005: This error can happen in all Windows operating system versions.

Possible Causes and Fixes of the Windows Update Error Code 0x80080005

Antivirus or other security software obstructing the Background Intelligent Transfer Service (BITS) is the most common cause of Windows Update error code 0x80080005. Background Intelligent Transfer Service (BITS) is essential to Windows 10, allowing the System to download and save files without causing issues with the network. Whenever a user experiences Windows update error 0x80080005, the System Volume folder is inaccessible to the system security descriptors.

Therefore, it is advisable to temporarily disable your third-party antivirus software and then update Windows to see if that fixes the problem.

If disabling your antivirus software does not resolve the Windows Update error code 0x80080005 issue, try to run the Windows Update troubleshooter. The Update troubleshooter, however, does not guarantee that the problem will be resolved.

Resetting the SoftwareDistribution and catoot2 directories, doing a DISM health scan, and running an SFC scan are other recognized ways to effectively repair the Windows Update error code 0x80080005 problem.

The most prevalent reasons for the Windows Update problem 0x80080005 are listed below.

It’s also crucial to understand why specific Windows Update issues, particularly the error code 0x80080005, arise, as some of them can be prevented. The following are the fundamental causes for this:

• The Windows Update components are not working correctly — When you run a Windows Update, various services in your System are triggered. If they aren’t running correctly, the error code 0x80080005 appears. Fixing the Windows Update components may help improve the experience in no time.
• The Windows Update service is down — While this is one of the less likely explanations, it has happened before and can be annoying. You may always go to Microsoft’s update page, click the Upgrade Now option, or download and utilize the Media Creation Tool to update.
• System files that are missing or corrupt — As you might expect, system files are critical to the proper operation of your device. If any or all of them are corrupted or removed for any reason, Windows Update will fail miserably. A method for repairing corrupt system files is shown below.
• An antivirus program is blocking updates — Some antivirus programs are renowned for stopping certain services, and if they start messing with your Windows Update, everything may get messy. Although this is not an everyday event, you should be aware of the risk.

Although there are many other possibilities, we’ve included the most common ones. However, the part below will assist you in resolving the error code 0x80080005.

To help you, we’ve made a list of solutions that should be beneficial in dealing with this problem.

Troubleshooting Methods for the Windows Error Code 0x80080005

Our straightforward troubleshooting methods contain screenshots to guide you through the procedure.

• Check out: What is the PC Health Check App?

Run the Windows Update Troubleshooter

The Windows Update Troubleshooter utility is one of the reasons Windows 10 is one of the most popular operating systems. Windows 10 includes a built-in troubleshooting tool to assist you in resolving Windows Update difficulties, looking into Windows update components, and more.

Try to remove Windows update error 0x80080005 by utilizing this tool.

Follow these steps to run Windows Update Troubleshooter to resolve problems with Windows Update:

1. Press the “Windows” key on your keyboard and press “R.” This will open a small window where you can type “control update” in the run command window.

1. When a new window opens, click “Troubleshoot” and “Additional Troubleshooters.“

1. Next, click “Windows Update” and “Run the Troubleshooter.”

1. At this point, the troubleshooter will automatically scan and fix errors in your PC. Once done, you can reboot and check if you are experiencing the same error.

See if the steps above can altogether remove the Windows update error 0x80080005. If not, try the following method.

Restart the Windows Update Services to Fix Windows Update Error 0x80080005

Another reason you can be getting Windows 10 Update Error 0x80080005 is if your Windows Update Services aren’t working correctly. This can be fixed by restarting the service.

1. Open the command prompt by hitting the “Windows” key on your keyboard and then pressing “R.” Type “command prompt” in the small window pop-up. Get an elevated command prompt access by pressing the “shift + ctrl” keys and hitting “enter.”

1. You will next see the command prompt. You need to enter a series of commands one by one. Be sure to hit “enter” after each command you type to stop the running services.

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

1. Once the services stop, you can restart by entering the following commands one at a time.

net start wuauserv

net start cryptSvc

net start bits

net start msiserver

4. Exit the command prompt, then reboot your PC.

5. Restart your Windows Update Services to see if these steps can fix Windows update error 0x80080005.

Perform the Windows System File Checker (SFC)

System File Checker or SFC is another excellent tool that you can use to fix Windows Update error 0x80080005. To do an SFC scan for and improve corrupt drivers or find missing files, you can use a free application with the Windows operating system.

To use Windows SFC to scan your machine, follow these steps.

1. Launch the command prompt. Press the “Windows” key, press “R,” and type the command prompt. Get an elevated command prompt access by holding the “ctrl and shift” keys together and hitting enter. Click “OK” on the next window to grant administrator permissions.

1. In the command prompt window, type the following commands “sfc /scannow” and hit “enter.” Wait for the SFC to complete the scan and restart the computer. Once done, run the Windows Update tool to check if the issue has been fixed.

1. After performing the above steps, move on to the next steps.

Use the Windows Deployment Image Servicing and Management Tool (DISM Tool)

The DISM application is used to check for and fix errors with the Windows Imaging Format, which might cause system file issues. It is another good tool to use when troubleshooting any windows update errors.

1. Press the “Windows” key and then press “R.” A small window will appear where you can type “CMD.”
2. The command prompt window will open, type in “DISM.exe /Online /Cleanup-image /Restorehealth” and then press “enter.”

1. DISM utility will start scanning and fixing errors, such as fixing corrupted files or updating outdated drivers. Once completed, restart your PC. Open the Task Manager to see if the error persists.

Perform a Check Disk

The Windows Check Disk application can scan and fix your hard disk to check for possible errors. This process may quickly fix error 0x80080005 on Windows 10. Although this tool may take a long time to complete, depending on how many files are saved on your hard drive, it can be valuable in preventing more serious issues.

1. Open the command prompt by pressing the “Windows” key on your keyboard and then press “R.” Next, type “cmd” in the run command line. Hold the “ctrl and shift” keys together and press enter. Click “OK” on the next window to grant administrator permissions.

1. Type the “chkdsk C: /f command” and hit Enter (C: with the letter of the hard drive you want to scan).

1. Wait for the check disk to complete and restart your computer. Once you get your laptop back, check to confirm if this has solved the issue.

Once all the updates have been installed, try to see if the issue has finally been resolved. If not, continue to the next step.

Use the Windows Creation Tool to Perform an In-place Upgrade

An in-place upgrade is another fantastic technique to fix error code 0x80080005. This can be a lengthy procedure, but you will no longer have to suffer from the update problem if done correctly.

If you perform an in-place upgrade, it will push Windows 10 to update from the ground up without affecting any of the PC’s contents. You can use the Media Creation Tool to upgrade to Windows 10.

1. Download the Media Creation tool and open it.

1. Choose Upgrade this PC now and click on Next.

1. The setup will take some time to prepare the necessary files to perform an upgrade. Once done, select the download and install updates. Click Next.

1. Once the download is finished, follow the instructions on the screen.
2. Once you arrive at the Ready to Install window, choose the option Change What to keep.
3. Select, keep personal files and apps and click on Next.

1. Complete the installation procedure by following the instructions displayed on the screen.

This update process will allow your PC to have the latest Windows 10 version.

Start the Windows Update Properties Manually

This next step will determine whether your Windows Update Service is running. If this service is disabled, Windows 10 will not be able to commence the update.

1. Hold down the “Windows” key and press the letter “R,” and type in “services.msc” in the run command window.

1. In the “Services” window, look for the “Windows Update” service, right-click and click on “Start.”

1. To make sure that the “Windows Update” service runs automatically, right-click on the “Windows Update” service once again and click “Properties.”

1. In the next window, click on “Startup Type,” select “Automatic,” and then click “OK.” Once done, restart the computer and verify if these steps fixed the issue.

This step is crucial as it will ensure that all the required services are enabled for the Windows update to work correctly. Also, be sure to click restart to see if it fixed the error code 0x80080005 problem.

Temporarily Disable Third-Party Antivirus Software

Sometimes 3rd, party antivirus programs can cause friction with your Windows update process. Therefore as part of the troubleshooting process, you need to disable the application temporarily. You still have the Windows Defender Firewall even when you disable this software. This is a built-in Windows security antivirus solution that ensures protection for your PC.

To disable 3rd party software, double-click on the antivirus icon. Every antivirus app is different, so you must follow on-screen instructions to disable it. Otherwise, you can also contact support to ask for help in disabling the antivirus.

Frequently Asked Questions

Windows 10’s performance and security are largely dependent on Windows Update, especially the radical upgrades that enhance system stability. 

However, even if you want to skip updates, it’s not possible since Windows Updates are obligatory. This means that you will inevitably be exposed to an abundance of error codes.

Not all errors are alike, but some pesky ones keep re-appearing for a variety of users with different system configurations.

There were some problems installing updates, but we’ll try again later. if you keep seeing this and want to search the web or contact support for information, this may help: (0x80080005).

The error code 0x80080005 takes this particular shape more often than not. Sometimes, you can stumble across slightly different versions such as the installer encountered an error 0x80080005 or download error – 0x80080005.

But you are more likely to see the full-fledged error stating that there were some problems installing updates, but we’ll try again later. if you keep seeing this and want to search the web or contact support for information this may help: (0x80080005).

Now, we are no strangers to such errors and thus, can help you fix problems that occur when installing updates without too much hassle.

In particular, error code 0x80080005 has proven itself a hard nut to crack, preventing updates whenever you check for new releases.

To help, we compiled a list of workarounds that should be useful while addressing this issue.

What does error code 0x80080005 mean?

When you’re performing a Windows Update, some services are triggered in your system and if they are not working properly, the 0x80080005 error shows up.

This can be a big problem, and speaking of this error, here are some similar issues that users reported:

• 0x80080005 Windows Update error – can occur in any version, including Windows 8.1 and 7. 0x80080005 in Windows 11 and 10 are also common
• Other platforms: 0x80080005 – Microsoft Store error – will sometimes appear when you access the Microsoft Store
• 0x80080005 Xbox – You can also encounter this error on other platforms such as gaming consoles, or browsers (see 0x80080005 Chrome)
• Also, the 0x80080005 – 0x90017 error gives you fewer indications but you should be able to fix the problem by using one of our solutions.
• 0x80080005 – 0x90018 – Another variation of the stop code

Here are the main possible reasons:

➡ The Windows Update components are not functioning properly – This is the main cause of this problem and that is why we’re treating it as a priority in this article.

➡ The Windows Update service is not working – Although it’s one of the least probable causes, it happened before, and it can be disruptive. You can always go to Microsoft’s update page and click on the Update now button or get the Media Creation Tool and use it to update.

➡ Missing or corrupt system files – As you would have guessed, the system files are paramount to the smooth running of your device and if any or some of them get corrupted or deleted for some reason, the Windows Update can fail miserably. Below, you will see a method that will repair corrupt system files.

➡ The antivirus may block the update – Some antiviruses are known for blocking some services and if they start bossing around with your Windows Update, things can get messy. This is not a very frequent occurrence, but you should consider the possibility.

Of course, there are many other possible reasons, but we listed the main troublemakers. The section below will, however, help you fix the error code 0x80080005.

How do I fix error code 0x80080005?

1. Fix error code 0x80080005 automatically

Installing an advanced third-party program to automatically scan your PC and fix Windows tweaks is recommended. System stability issues are caused by various factors, but most of them are connected to the Windows registry.

An updated OS and a registry cleanup performed on a regular basis will improve your computer’s performance and protect it against malware.

2. Reset the Software Distribution Folder & Windows Update components

1. Type cmd in Windows search and select Run as administrator from the list.
2. Now type or paste the following commands one by one and press Enter after each to run it:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
ren C:WindowsSoftwareDistribution SoftwareDistribution.old
ren C:WindowsSystem32catroot2 catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
pause

The error 0x80080005 appears often due to issues with Windows Update components. To fix that, you need to reset the necessary components manually.

After running these commands all the necessary components will be restarted and you’ll be able to download updates again.

If you don’t want to run all these commands manually, you can always create a Windows Update reset script and use it to reset the necessary components automatically.

3. Run the Windows Update troubleshooter

1. Press Windows Key + I to open the Settings app.
2. Navigate to the Update & Security section.
3. Now select Troubleshoot from the menu on the left.
4. In the right pane select Windows Update and click Run the troubleshooter.
   
5. Follow the instructions on the screen to complete the troubleshooter.

Sometimes a minor glitch can occur and prevent you from downloading the latest updates. If you’re having an update error 0x80080005, you might be able to fix the problem using the Windows Update troubleshooter.

Windows comes with a wide range of troubleshooters, and you can use them to fix many common problems. To use Windows Update troubleshooter, check the steps above.

If you’re having trouble opening the Settings app, we have a great guide that will show you what to do if the Settings app is not starting.

4. Scan your system for issues

4.1 Run SFC scan

1. Type command in the Search bar and click on Run as administrator to start Command Prompt with elevated permissions just like we did in the first step.
2. In the command line type the following line and press Enter to confirm: sfc/scannow
3. After the procedure is done, retry updating.

4.2 Run the DISM scan

1. Press Windows key + X and select PowerShell (admin) from the menu.
2. In the command line, type the following and press Enter: DISM /Online /Cleanup-Image /RestoreHealth
3. If you have a Windows 10 ISO mounted on a physical media or on a virtual drive you can use this alternative command (press Enter to run it): DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
   • Don’t forget to replace X with a corresponding drive letter on which your Windows 10 ISO is mounted.

The process may be lengthy, so make sure not to interfere until it’s done, or you won’t benefit from the results.

Once the DISM scan is finished, check if the problem is still there. If the issue is still present, repeat the SFC scan and check if that solves the issue.

4.3 Run a chkdsk scan

1. Open PowerShell by pressing the Windows key + X shortcut and selecting PowerShell (admin) from the list.
2. Once the window opens, paste the following command and press Enter to run it: chkdsk /f c

This command with chkdsk will fix all the possible corrupted files on your drive so it might also take care of the error 0x80080005 so it wouldn’t hurt to try it.

If you want to avoid using so many commands to scan and fix issues on your system, you can simply use Restoro to perform the same actions quickly.

5. Take ownership of the System Volume Information directory

1. Press the Windows key + X combination and select the Windows PowerShell (Admin) from the list of options.
2. Now enter the following command and press Enter: cmd.exe /c takeown /f "C:System Volume Information*" /R /D Y && icacls "C:System Volume Information*" /grant:R SYSTEM:F /T /C /L

Some of our readers got the error 0x80080005 while Windows was trying to access the System Volume Information directory.

It seems that Windows can’t access this directory for some reason, but you can fix that by changing system permissions.

After running this command, you’ll have full access to the System Volume Information directory and the problem with Windows Update will be resolved.

Taking ownership of a file or folder in Windows 10 shouldn’t be too complicated, and could prove useful when dealing with issues like this one.

6. Use the Registry Editor

1. Press Windows Key + R and enter regedit. Now press Enter or click OK.
   
2. In the left pane, navigate to the following path: ComputerHKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl
3. Right-click on an empty space in the right pane, click on New, select DWORD (32-bit) Value and name it RegistrySizeLimit.
4. Double-click the newly created RegistrySizeLimit DWORD and set its value to 4294967295.

According to users, sometimes update error 0x80080005 can appear due to issues with your registry. To fix the problem you need to create a single value in your registry as shown in the steps above.

After saving the changes, check if the problem is still there. We also provide a very helpful guide on what to do if the Registry Editor is not opening if you find yourself in that unpleasant situation.

7. Disable the Windows Update service

1. Press Windows Key + R and enter services.msc. Press Enter or click OK.
   
2. When the Services window opens, locate Windows Update service and double-click it to open its properties.
3. Now set the Startup type to Disabled and click Apply and OK to save the changes.
   
4. Restart your PC.
5. When your PC restarts, go back to the Services window, open Windows Update service properties, set Startup Type to Automatic, and start the service.

Some of our readers found out that sometimes you might be able to fix update error 0x80080005 simply by disabling the Windows Update service as indicated in the steps above.

8. Upgrade with the Media Creation Tool

1. Download the Media Creation Tool.
2. After Windows 10 is downloaded, accept the license agreement.
3. Run the tool and select Upgrade this PC now.
4. Wait while the update downloads the necessary files.
5. Follow the instructions until you reach Ready to install screen.
6. Click Change what to keep and select Keep personal files and apps option.
7. Now click Next. The installation will now start. Follow the instructions on the screen to complete it.

Besides a clean reinstallation of the OS, the Media Creation Tool can be used for updates as well.

Even though we advise you to perform a clean install to fix update issues, you can preserve your files, apps, and settings this way.

Once the installation process is finished, you’ll have the latest version of Windows installed, and the issue should be resolved.

9. Disable the third-party antivirus software

If you’re having issues with error 0x80080005 on your PC, the cause might be third-party antivirus software. They may prevent some updated files from downloading or even deleting and corrupting them.

To fix the problem, you should try disabling certain antivirus features or completely disabling your antivirus before trying to install updates.

This of course depends on the antivirus software you have installed, as in some cases, you might be able to use the built-in option to simply pause the protection for a specific amount of time.

Because we use Eset NOD 32, we have the option to pause the protection at will, choosing from a specific list of options regarding when to re-activate the software’s protection.

To enable this option in Eset antivirus software, follow these steps:

1. Right-click the Eset icon from the taskbar, and choose Pause protection.
2. Click the drop-down and choose the preffered option.
3. Select Apply.

In case you’re using other antivirus software, the exact steps will be different. There might be cases in which your antivirus doesn’t offer you the possibility to pause the protection, in which case you will need to remove it from your PC by uninstalling it.

There are many great antivirus tools on the market, and you could try out the powerful Eset NOD32, or you can check out a great list including the best antiviruses for Windows 10.

How to prevent error 0x80080005 from occurring again

Considering that the error code 0x80080005 appears when you’re trying to update your OS, there are a few precautions that you can take to avoid it.

However, there are some general steps to take if you want to avoid Windows Update errors and this one in particular.

➡ Update your system regularly

Windows is updated regularly but not all updates are installed automatically. There are also optional updates for drivers that are not installed by default.

If you want to get them, you need to Go to Settings, then click on Windows Updates, and select the View optional updates option like in the screenshot below.

Then, clicking on the Driver updates section will reveal the available drivers. You just need to select the ones you want to install and hit the Download and install button below. You can also try dedicated PC optimizer software for the same effect.

➡ Keep your system as tidy as possible

Installing too many programs can clutter your system and that’s an invitation for corrupt system files to appear and mess up with your updates.

So, try to keep your system as clean as possible by uninstalling any necessary programs by visiting your Apps section from Settings and clearing some of the old, unused apps.

You just need to select the app that you want to get rid of and hit the uninstall button, just like in the screenshot below.

We hope you managed to fix the Windows 10 update error 0x80080005 by using one of our solutions above.

However, if you run into other such issues, you can also consult our article about how to fix common Windows update problems.

Updating your system is extremely important and that is why we also recommend checking out the latest Windows security update and staying up to date.

If you have any alternative solutions or questions regarding the ones presented, feel free to tell us in the comments section below.