Go to SwitchPirates
Error 2002-1002 in a few games after creating an emunand.
Iam was getting the error 2002-1002 in a couple games after creating an emunand in atmosphere.
So i realized that i only got this error in titles that i had already played before the emunand , so i restore the saves and 80 % of those titles worked again. After that i went to tinfoil and did the konami code to install unsigned NCA and most of the games back to normal.
Now i only have issues with mario kart deluxe and animal crossing , i already tried to re install them allowing unsigned nca’s and restore the saves but it didnt work
Any tip to solve this error ?
EDIT: seems that some games like mario kart 8 and animal crossing have their game saves in a hidden partition ( or something like this )
So the only way to acess them is using the JKSV. So deleting the saves from nand in nintendo options and restoring them all the games are working , thank you everyone.
Error code 2002-1002 is displayed while starting a game or while downloading software on Nintendo Switch.
Additional Information:
If a microSD card is inserted on the console, the save location will default to the microSD card when downloading or redownloading software.
What to Do:
-
Ensure your console has the latest system update.
-
If the console is already up to date, restart it by holding down the POWER Button for three seconds, then select «Power Options» > «Restart.»
-
-
Check for corrupt data.
-
Delete the problematic software and redownload it.
-
If the issue persists, try the following:
-
Reseat the microSD card by removing and reinserting the microSD card.
-
Format the microSD card.
Important:
-
Once formatted, the information on the microSD card cannot be recovered. If screenshots or videos are stored on the microSD card, be sure to first back up the information on a computer.
-
If downloadable software was saved to the microSD card, it can be redownloaded using the same Nintendo Account where it was purchased
-
-
Use a different microSD card.
-
Remove the microSD card and download the software directly to the system memory.
-
Situation Not Resolved:
If the error persists with multiple supported microSD cards, or when downloading directly to the system memory, the Nintendo Switch console will need to be repaired.
If you would like further assistance with the Nintendo Switch console, please contact Nintendo Customer Service.
You should upgrade or use an alternative browser.
- Joined
- May 6, 2020
- Messages
- 14
- Trophies
- 0
- Age
- 25
- XP
-
88
- Country
-
#1
I buyed Mario Kart as a physical card. When I start the game I get the Error-Code: 2002-1002.
I already tried everything I found about this error. Reset micro-sd, another micro-sd, delete all, reset switch.
I can play all of my games but not mario kart.
I tried to play it on sysnand and for troubleshooting also on sysMMC and emuMMC with the original game and with nsp from the internet just to make sure my card isn’t corrupt.
Thanks in advance.
-
#2
Open bootloader/hekate_ipl.ini, and then remove the line
«kip1patch=nogc» from your Atmosphere boot option.
If you’re booting Atmosphere with Fusee:
Open atmosphere/BCT.ini, and then under «[stratosphere]»
add the line «nogc = 0» to force disable nogc.
- Joined
- May 6, 2020
- Messages
- 14
- Trophies
- 0
- Age
- 25
- XP
-
88
- Country
-
#3
my hekate_ipl.ini:
autoboot=0
autoboot_list=0
bootwait=0
backlight=100
autohosoff=0
autonogc=1
updater2p=1
[CFW — sysMMC]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp
[CFW — emuMMC]
fss0=atmosphere/fusee-secondary.bin
kip1patch=nosigchk
emummcforce=0
atmosphere=1
icon=bootloader/res/icon_payload.bmp
[Stock — sysMMC]
fss0=atmosphere/fusee-secondary.bin
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp
and my BCT.ini:
[stage1]
stage2_path = atmosphere/fusee-secondary.bin
stage2_mtc_path = atmosphere/fusee-mtc.bin
stage2_addr = 0xF0000000
stage2_entrypoint = 0xF0000000
[stratosphere]
; To force-enable nogc, add nogc = 1
; To force-disable nogc, add nogc = 0
nogc = 0
; To opt in to using Atmosphere’s NCM reimplementation, add enable_ncm = 1
-
#4
- Joined
- May 6, 2020
- Messages
- 14
- Trophies
- 0
- Age
- 25
- XP
-
88
- Country
-
#5
Maybe the cart is messed up?
it works on another switch´.. soo i don’t think its messed up
- Joined
- Jun 20, 2020
- Messages
- 1
- Trophies
- 0
- Age
- 42
- XP
-
32
- Country
-
#5
Did you solve your problem ? I have exactly the same. Last firmware 10.0.4 on my emuMMC, with last hekate and atmopshere update. When i try to play with carts, like mario kart or just dance, i have the error 2002-1002.
I have modified hekate_ipl.ini and bct.ini but it doesn’t change my problem. I try to remove mario kart files and install them again with update but always the same problem.
All my carts work well on my OFW.
- Joined
- Aug 2, 2020
- Messages
- 1
- Trophies
- 0
- Age
- 45
- XP
-
22
- Country
-
#5
Same problem here. If I give up to use the cartridge and try do download the game with tinfoil, it shows the same 2002-1002 error message. It happens with all my original games. When I create the emunand, I already have those games installed. Maibe that’s the problem. Any clue?
Thank you very much.
-
#6
Hi,Same problem here. If I give up to use the cartridge and try do download the game with tinfoil, it shows the same 2002-1002 error message. It happens with all my original games. When I create the emunand, I already have those games installed. Maibe that’s the problem. Any clue?
Thank you very much.
Take out game card, delete the app data. Then insert and download update for the game. If it still doesnt work, might be your save data so try deleting that
- Joined
- Sep 27, 2021
- Messages
- 2
- Trophies
- 0
- Age
- 34
- XP
-
29
- Country
-
#7
-
#8
I have the same problem here, but just with a bunch of games like Mario Kart or Smash bros. I cant find any clue on internet. I update the sigpatches, with last atmos and the uptdated fw…But that two games doesnt work
Where did you download your patches from?
-
#9
Hi,
I buyed Mario Kart as a physical card. When I start the game I get the Error-Code: 2002-1002.
I already tried everything I found about this error. Reset micro-sd, another micro-sd, delete all, reset switch.I can play all of my games but not mario kart.
I tried to play it on sysnand and for troubleshooting also on sysMMC and emuMMC with the original game and with nsp from the internet just to make sure my card isn’t corrupt.
Thanks in advance.
Hello, i found solution. I have always up to date Sigpatches, Atmo etc. so all solutions from this and other sites dont work. Reinstalling game, installing from another sites still dont help.
I used game card to play and later i installed NSP with this game and game stopped working no matter i use game card or no.
My solution is: go to System Settings > Data Management > Delete Save Data. Now you need to choose game dont work and clean all save data for this software.
I know answer will refresh old post but it was for many ppl who actually use switch and can get this problem and can help in future.
Similar threads
- No one is chatting at the moment.
Note: If a microSD card is inserted on the console, the save location will default to the microSD card when downloading or redownloading software.
What to do
- Ensure your console has the latest system update.
- If the console is already up to date, restart it by holding down the POWER Button for three seconds, then select Power Options followed by Restart.
- Check for corrupt data.
- Delete the problematic software and redownload it.
-
Continue using the console and monitor the situation.
-
If the issue persists, try the following:
- Reseat the microSD card by removing and reinserting the microSD card.
- Format the microSD card.
Important
- Once formatted, the information on the microSD card cannot be recovered. If screenshots or videos are stored on the microSD card, be sure to first back up the information on a computer.
- If downloadable software was saved to the microSD card, it can be redownloaded using the same Nintendo Account where it was purchased.
- Use a different microSD card.
- Remove the microSD card and download the software directly to the system memory.
If the error persists and a microSD card is not being used, the Nintendo Switch console will need to be repaired.
For your convenience, Nintendo provides a quick and easy-to-use online repair process.
-
If this information resolved your issue, then you’re all set! For information about Nintendo’s products, be sure to check out Nintendo’s website for all the latest news.
If the error persists with multiple supported microSD cards, or when downloading directly to the system memory, the Nintendo Switch console will need to be repaired.
For your convenience, Nintendo provides a quick and easy-to-use online repair process.
Nintendo is a video game console that was released on September 23, 1889. It was developed by Nintendo Co., Ltd. The game system can be used to play video games on your computer or on your television. The game system features different gameplays, and it features different characters that you can choose from.
There are many games that are compatible with the Nintendo game system. Some of these games include Super Mario Brothers, Pokemon, The Legend of Zelda, Super Smash Bros, and Splatoon.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
Error information
What causes the 2002-1002 error?
The Nintendo documentation indicates that error code ‘2002-1002’ is caused by the following problem: «A game cannot download or start This will happen with a MicroSD».
Do you think there is another cause for this error? Let others know in the comments.
How to solve Nintendo Switch error 2002-1002
We’ve created a list of solutions which you can follow if you want to solve this Switch problem yourself. Do you need more help? Visit our support page if you need professional support with Switch right away.
Tech Support 24/7
Ask a Tech Specialist Online
Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.
Verified solution
You might encounter an error while playing a game on your Nintendo game system. This error can occur during the game and it can prevent you from playing the game properly. It is very annoying and frustrating to experience this error while playing a video game. This error can be caused by a common computer problem or it can be caused by an issue with your Nintendo console or your Nintendo account.
One of the most common errors that you might encounter while playing a game on your Nintendo game system is the Nintendo 2002 1002 Error. This error may occur when you try to access your Nintendo account or when you try to play a game on your Nintendo game system. This error can be annoying and frustrating because you cannot access the game properly.
The problem can be caused by an issue with your device or it can be caused by an issue with your internet connection. It is possible that another application is interfering with the proper functioning of your Nintendo game system. To fix this error, you need to try these solutions one by one until you find the solution that works for you.
First of all, error code 2002 1002 usually appears when you are starting the console or launching a game. There are some simple steps that you can follow to fix this error code.
Make sure that your console is up to date by going to Settings > System Update. If the update is not available, you can check the website of your console’s manufacturer. If it’s already up to date, you can try power cycling the console by unplugging it from the power source and holding down the power button for 10 seconds. Plugging it back in will reset the system.
Make sure that your card is not corrupted. Remove the game card and try to play the game again. If it still fails to work, you can try removing your card and replacing it with a new one. Then, try deleting the app data and then re-downloading the game.
Lastly, another solution you can try is to contact the Customer Service to solve this error. You can try contacting them through their customer support number or their website. The customer support will usually ask you to send them the error code that is appearing on your screen. They will tell you what to do next for your problem and give another solution.
Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.
Need more help?
Do you need more help?
Tech experts are ready to answer your questions.
Ask a question