Nisca pr c101 коды ошибок

T

r

o

u

b

l

e

S

h

o

o

t

i

n

g

T

r

o

u

b

l

e

S

h

o

o

t

i

n

g

•w Error code 10h ~ 2Fh

•w

Error display

Err.

Cover Open

10

Card Empty

11

20

Rbn Empty

25

21

Rbn Wind

24

22

Rbn Type

23

No Ribbon

26

28

S e r v i c e C .

2F

•w Error Code 30h ~ 4Fh

•w

Error display

Err.

F e e d M i s s

30

31

40

41

42

Card JAM.

43

44

4D

4E

4F

•x Cover open / Card empty / Ribbon related / Up•E Down of print

•x

head / Path switching

Add.

01

Front access cover open

01

Card empty

01

End mark detected (when printing)

02

End mark detected (when initializing)

11

Ribbon end Cartridge is installed.

03, 04

Abnormal clock of ribbon take up spool

05

Abnormal clock of ribbon feed spool

**

Abnormal ribbon insert sensor

01

Abnormal unique/end mark position

02

Abnormal black panel

03, 04

Abnormal panel space (short)

05

Abnormal panel space (long)

06

Unique mark not detected (front of yellow panel)

07

Unique mark not detected (front of cyan panel)

08

Abnormal cycle of unique mark

**

Ribbon transport time out

11,12

Cartridge

Ink Ribbon

**

Abnormal up/down of thermal head

**

Abnormal move of path switch part

•x

Card jam related errors

•x

Add.

**

Card feed failure

**

Card jam at card feeder

**

Card transport failure jam in printing part

**

Card transport failure jam in printing part

**

Card transport failure jam in printing part

**

Card transport failure jam in printing part

**

Card transport failure jam in printing part

**

Card transport failure jam in printing part (ejection failure)

**

Card transport failure jam in printing part (ejection failure, double transport)

**

Abnormal card position control in card control part

Description

not detected

Description

36

Click below to download the latest PR-C101 Driver. Compatible on Windows XP, Vista & 7.

Click below to download the PR-C101     Operations Manual.

Click below to download the PR-C101               Easy Setup Guide.

• 13, Nisca PR-C101 O O p p e e r r a a t t i i o o n n o o f f O O p p e e r r a a t t i i o o n n P P a a n n e e l l 10 ? ? Explanation of Functions of Service Mode Adjustment printer adjustment related menus This menu is for adjustment of print conditions such as maximum density and print position etc. Note: Do not change the adjustment values excessively as it may cause tr…

• 38, T T r r o o u u b b l l e e S S h h o o o o t t i i n n g g 35 ? Checking and repairing of hardware related troubles If troubles are unrecoverable by user, service engineer is required to check and repair in the following steps. <Caution> Read before trouble shooting without fail. 1. Each error is shown with error message, error code (Er) an…

• 55, Nisca PR-C101 T T r r o o u u b b l l e e S S h h o o o o t t i i n n g g 52 ? Trouble which can not be checked on LCD The following describes the method to recover from the trouble which can not be checked on LCD. <Caution> Do not fail to read before performing troubleshooting. 1. When performing the following, turn OFF the power switch and pull out the cor…

• 28, R R e e p p l l a a c c e e m m e e n n t t a a n n d d a a d d j j u u s s t t m m e e n n t t 25 Fig 1 Fig
  …

How do I print a test card?

1. Go to your Printers and Faxes folder
2. Right click on the Nisca PR-C101, choose printing preferences
3. Click on the Maintenance tab
4. Click on the Test Data Printing Icon
5. A test card will print.

How do I clean the printer?

1. Turn on the power and switch from Normal Mode to User Mode.
2. Press the Menu Key until [Cleaning >>] appears and then press the EXE Key.
3. Remove the cards from the Card Case and then press the EXE Key.
1. If cards are loaded, [Remove Cards] appears.
2. When the cards have been removed, [Push EXE (NEXT)] appears.
4. [Set Cleaning Card] appears when the Cleaning Card is loaded.
1. Remove the protection sheet from the sticky surface of the Cleaning Card, and then load it with the sticky surface face down.
2. When the Cleaning Card is loaded, [Push EXE (Start)] appears.
5. Press the EXE Key.
1. The Cleaning Card is pulled into the printer and cleaning starts.
2. The Cleaning Card comes out of the Card Ejection Slot 1 when cleaning is completed.

How do I clean the feeding roller?

1. Turn off the power.
2. Remove the Card Case. Grip the Card Case by the ridges on its side and pull it as indicated by arrow in the illustration.
3. Wipe the roller clean. Use a soft cloth and very pure alcohol to wipe the roller clean. Turn the roller as you wipe it to clean it in the direction of an arrow.

I try to print cards but get no answer from the printer. What should I do?

1. Check that there is a print driver for your printer in the Windows configuration. Check that the printer is selected as the default printer.
2. Check that the power cable is correctly connected to the printer and to a working electrical socket. Make sure you are using the power supply unit supplied with the printer.
3. Check that the USB cable is connecting the printer to your computer.
4. Check that the ribbon is fitted correctly and that the cover is closed.
5. Check that there are cards in the card feeder. Check that no cards are jammed in the printer.
6. Print a test card.

When I launch a print job, a blank card gets ejected. How do I fix this problem?

1. Check that the ribbon is not finished or damaged. Replace it or re-install it if necessary.
2. The print head may be damaged: print a test card. If the test card does not print, contact our support team.

My printed cards look pale / the print quality is poor.

1. Check that your cards are perfectly clean. Use new cards.
2. Run a cleaning cycle.
3. Check that there are no wrinkles on the ribbon surface.
4. Clean the print head.
5. Check that the ribbon is correctly positioned in the printer.

I notice partial or incorrect printing on my cards.

1. Check that no area of the card design to be printed is outside the print margins.
2. If irregular characters are printed, check that you are in fact using the USB cable supplied with your printer. Check the connection between the computer and the printer. Try using another cable of the same type.
3. Clean the printer, especially the cleaning roller.
4. Check that the cards are clean. Store your cards in a dust-free environment.
5. Check that the ribbon is fitted correctly and that it spools freely.
6. Check the print head.

My cards get jammed in the printer.

Remove the card as follows:

1. Remove cards from the Card Case.
2. Open the Front Cover, and then rotate the Ejection Dial to the left. Jammed cards are ejected.

To prevent card jams:

1. Check that the cards are flat. Keep them in a horizontal position.
2. Check that the cards are not stuck together. Fan the cards before loading them.