Noblelift ps16l коды ошибок

• Page 1
  FE4P50-70N WARNING Do not use the pallet truck before reading and understanding these operating instructions. Keep for future reference. Operation and maintenance manual FE4P50-70 N series battery counter balanced forklift truck Noblelift Equipment Joint Stock Co., Ltd…

• Page 2: Table Of Contents

  Catalogue Forward ……………………………………………………………………………………………………… 4 Chapter one Attention when using the forklift truck ………………………………………………… 1、Transportation for forklift……………………………………………………………………………… 2、Deposit…………………………………………………………………………………………………… 5 3、Preparation before use………………………………………………………………………………… 4、Operation of truck……………………………………………………………………………………… 5、Battery charging………………………………………………………………………………………… 6 Chapter two The main performance parameters of forklift truck …………………………………… 7 Ⅰ、The truck’s outline dimension and performance parameters ……………………………………… 7 1.The truck’s outline dimension ……………………………………………………………………………

• Page 3
  5．Battery ………………………………………………………………………………………………… 40 5.1 Battery safety requirements ……………………………………………………………………… 5.2 Battery use requirements ………………………………………………………………………… ……… 5.3 Battery charging …………………………………………………………………………… Installation and replacement of battery …………………………………………………… 6．Hydraulic system …………………………………………………………………………………… 43 6.1 Sumarry ……………………………………………………………………………………………… 43 6.2 Oil pump ……………………………………………………………………………………………… 43 6.3 Multiway valve ……………………………………………………………………………………… 43 6.4 Lift cylinder and lift chains ……………………………………………………………………………
• Page 4
  3．Switches ……………………………………………………………………………………………… 67 4．Control ………………………………………………………………………………………………… 68 5．Bodywork ……………………………………………………………………………………………… 70 Ⅲ、Safety issues…………………………………………………………………………………………… 72 1Operation place and working environment …………………………………………………………… 72 2．Safety rules …………………………………………………………………………………………… 72 3．Truck’ s transportation ………………………………………………………………………………… 82 4．Howtoavoidoverturning,howtoprotectyourself ……………………………………………………… 83 5. Safety problem in Maintenance ……………………………………………………………………… 84 6． Safety problem in battery usage ……………………………………………………………………… 86 7．Plate ………………………………………………………………………………………………………

• Page 5: Forward

  Forward This manual briefly introduces the technical parameters as well as the construction,working principle and the requirements in operation and the maintenance of each main part of the four-wheel battery counter-balanced forklift truck of our company.Before operation,please read the manual carefully to ensure safe and efficient load portage by correct operation and maintenance,and to help the operator to use the battery forklift truck properly so as to make full use of it.It is hoped that the operator and the facility manager read the manual carefully before operation!Please perform strictly according to the attention matters in this manual,drive…

• Page 6: Chapter One Attention When Using The Forklift Truck

  Chapter one Attentions when using the forklift truck The operator mast always keep in mind the principle of safety first.Conscientiously and cautiously read the maintenance manual.Undergo safe operate and canonical operate strictly following the demand in this manual 1 Transportation for forklift Pay attention to the following particulars when using container or automobile to convey forklift truck (1) Enable parking brake…

• Page 7: 5、Battery Charging

  (11) No operation of truck and it’s additions without sitting on the driver’s seat (12) Push handle immediately to middle position when the mast has tilted forward or backward to the extreme position (13) No driving or turning when the mast is lifting (14) When travelling,pay attention to passers by,obstacles,irregular road and the clearance of upper side of forklift (15) Be careful of travelling on slope,when the angle of slope is more than10%,travel forward…

• Page 8: Chapter Two The Main Performance Parameters Of Forklift Truck

  Chapter two The main performance parameters of forklift truck Ⅰ、The truck’s outline dimension and performance parameters 1. The truck’s outline dimension see figure 1-1 Figure 1-1 outline…

• Page 10
  2.2 FE4P50N Technical data（list 1-2） Model number FE4P50N Drive mode: Electromotion Operation mode: Seat-driving pattern Rated capacity Q(kg) 2500 Load center distance C(mm) Load distance x(mm) Wheelbase y(mm) 1500 Service weight including battery 4260 Axle loading,laden front/rear 6010/750 Axle loading,unladen front/rear kg…
• Page 11
  2.3FE4P60-70N Technical data（list 1-3） Model number FE4P60N FE4P70N Drive mode: Electromotion Operation mode: Seat-driving pattern Rated capacity Q(kg) 3000 3500 Load center distance C(mm) Load distance x(mm) Wheelbase y(mm) 1650 1650 Service weight including battery 4850 5250 Axle loading,laden front/rear 6910/940 7700/1050 Axle loading,unladen front/rear kg…

• Page 12: Ⅱ、The Construction,Principle And Adjustment Of The Truck’s Main Parts

  Ⅱ、The construction,principle and adjustment of the truck’s main parts 1. Drive system 1.1 Summarize The drive system consists of gear box assembly, differential mechanism assembly and drive axle, the reducer drive gear connects directly to drive motor.The travel speed increases with the increment of rotational speed of drive motor, And when the rotational direction of the motor changes, the travel direction changes too.

• Page 13: Drive Axle

  1. differential 2.bearing seat 3.bolt 4.lock plate mechanism hub 5.gear 6.gear axle 7.washer 8.axle 9.gear 10. differential 11.gear ring 12.bolt mechanism hub 13.lock plate 14.bolt 15.lock washer 16.dowel pin 6×30 17.nut M10×1.25 18.bearing 6213 19.washer Figure 2-2 Differential mechanism 1.3 Drive axle The drive axle consists of axle shell,wheel hub and arrester.

• Page 14
  List 2-1） List 2-1The main technical parameter Truck model FE4P50N FE4P60N FE4P70N Construction pattern of drive front wheel drive,axle body is fixed with truck frame full…

• Page 15: Installation Of Wheel Hub

  1.4 Installation of wheel hub (1) Fill the wheel hub with 100ml grease,and then fix it on the axle.see figure 2-4. (2) Screw up adjust nuts with 9.8N.m of twist moment,then reverse them 1/2 coil (3) Hang the weighter on the bolt to measure the starting moment of the wheel hub,when it reachs the defined value,start to screw up the nut.

• Page 16: Malfunction Analysis

  1.rim 2.rim 3.nut M16 4.washer 16 5.bolt 6.轮胎 figure 2-6 tyre assemble 1.5 Malfunction analysis List 2-2 malfunction diagnose and adjustment malfunction possible reason adjusting method items shake a lot the fastening bolts loosen Tighten gear oil deteriorates replacing Too high of Un usual Oil level Supplying or reducing temperature…

• Page 17: Brake Base Pump

  1. brake oil cup 2. brake support 3. brake sensor 4. bolt 5. brake pedal 6. brake pump figure 2-7 brake paddle assembly 2.3 Brake base pump（figure 2-8） Base pump consists of a valve support,a one-way-valve,a rebound spring and base leather cup,piston,assistant leather cup.The end of the base pump is fixed with lock washer and lock steel wire,And the outside of it is protected with rubber dust preventing cover.The base pump works under the assistance of pushing rod by operating brake paddle,Step down the brake paddle,the…

• Page 18: Brake Staff

  1.latch nut 2.pushing rod 3.antidust cover 4.locking steel wire 5.locking 6.assistant 7.piston 8.base leather washer leather cup 9.spring 10.cheak valve 11.valve 12.pump body supporter figure 2-8 base brake pump 2.4 Brake The brake staff adopted is two shoe brake installed in the two sides of drive axle.The brake staff consists of two groups of brake shoes,subsidiary brake pumps and regulators,one end of the brake shoe,which holds back the parking brake parts through rebound spring and Pressure spring,contacts with fixing pin and another end of it contacts with regulator,In addition,there are…

• Page 19
  (1) Motion of brake stuff The brake drum is pressed by the leading brake shoe and the secondary brake shoe with the same force from subsidiary brake pump,when the top side of the brake shoe is stopped by the fixed pin,the brake shoe will move toward brake drum until being stopped by the fixed pin,then the friction between wearing piece and brake drum will increase.

• Page 20: Parking Brake Operating Device

  2.5 Parking brake operating device（figure 2-15） Parking brake handle is cam in pattern.Adjuster lying at the end of handle is available to adjust the brake force. Turning the adjuster clockwisely,the brake force increases;Turning the adjuster counter clockwisely,the brake force decreases. Pulling force:196N～294N figure 2-14 gap-self-regulating device figure 2-15 parking brake handle…

• Page 21
  regulator and regulating spring.See figure 2-19 figure 2-18 figure 2-19 (5) Disassemble the brake tube from the driven brake pump,and disassemble the assembling bolts on the subsidiary brake pump.Then disassemble the subsidiary brake pump from brake device motherboard.See figure 2-20 (6) Disassemble the E baffle ring to fast the brake dragline from brake device motherboard.Then disassemble brake device motherboard bolts,and disassemble brake device motherboard from drive axle.
• Page 22
  figure 2-23 figure 2-24 2.6.3 Assembling brake device (1) Wipe brake liquid on cup leather and piston of brake sub-pump, assembling spring, piston cup leather, piston and defend ring. (2) Install brake sub-pump on motherboard. (3) Mount motherboard on drive axle. (4) Wipe anti-heat lubricate grease on the region instructed in figure 2-25.

• Page 23: Adjusting For Brake Pedal

  figure 2-28 figure 2-29 2.6.4 Operating trial for self-adjustor of clearance See figure 2-30 (1) Adjust diameter of brake hoof close to the regulation size first, rotate adjustor by pulling adjusting bar, when releasing hand, adjusting bar return original place but adjustor gear doesn’t rotate.

• Page 24: Malfunction And Cause

  Bolt Push rod Pedal figure 2-31 (5) Adjusting brake switch as figure 2-32 (a) After adjusting brake pedal height,release lock nut of brake switch (b) Pull off plug to separate wire (c) Rotate switch to make clearance into A=1mm (d) To be sure when step pedal down, the light of brake shall be open. (e) Tighten the nut.

• Page 25: Maintenance

  Brake badness Adjusting Mal-touching between brake drum and friction slice again 5 Dirt on friction slice Repair or replace 6 Impurity is in liquid Check brake liquid 7 Bad-regulate for brake pedal(inching valve) Regulate Repair or 1 Friction slice impurity or case hardening replace Repair or 2 Motherboard deformation or bolt loose…

• Page 26: 3．Steering System

  (a) Check brake drum to see whether there is destructive abrasion. (b) Check brake shoe for abrasion,if it can not reach the operating requirement,replace the brake shoe at once. (c) Check whether the axle shell is normal,if the oil level is less than normal,supplement the ⑤…

• Page 27: Steering Axle

  valve in valve body to be used to prevent damage on equipment when hydraulic pressure is too high produced by impact of outside force which is from ground to wheels during travelling. Both safety valve and two-way overloading valve are regulated in optimum by manufacturer, so, users shall not regulate it randomly.

• Page 28
  1.steering axle 2.connecting rod 3.steering cylinder 4.anti vibration pad assembly 5.steering axle fixing 6. right knuckle 7. bearing 51208 8.bearing 943/32 plate assembly 9.kingpin 10.dowel pin 10×20 11.adjusting pad 12.oil seal 13.kunckle adjusting 14.nut M12 15.dust cover 16. bearing 17. bearing 18.
• Page 29
  (1) Kunckle Kunckle,combined by kunckle king pin,conical roller bearing,anti-dust cover,O ring,locates between upper and down side of the steering axle body terminals. the upper end of king pin is fastened on axle body by stop pin,and the lower end of it is fasten on axle body by forelock. The supporter is supported by conical roller bearing which is pressed-in the axle body.（see figure 2-36）…

• Page 30: Gist For Adjustment And Maintenance

  (3) Wheel hub Wheel Hub is fitted on kunckle by taper bearing, wheel is fitted on wheel hub by wheel rim, there is oil seal inside of bearing to keep lubricate greese in cavity of wheel hub and kunckle. There is nut to adjust bearing for elasticity. 3.4 Gist for adjustment and maintenance (1) See figure 2-38, lubricate inner cavity of wheel hub, inside or outside bearing and cover of wheel hub, meanwhile, lubricate oil seal…

• Page 31: Diagnose Of Steering System

  3.6 Diagnose of steering system（list2-4） List 2-4 problem cause elimation damage or malfunction of oil pump replace steering wheel can not move hose connector is damaged or plug of pipeline replace or cleaning safety valve pressure is too low adjust pressure air in oil circuit exhaust air steering wheel…

• Page 32: 4．Electrical System

  4. Electrical system 4.1 Summary Electrical system of FE4P50N is powered by 48V battery set, Electrical system of FE4P60-70N is powered by 80V battery set .traction power of the truck is powered by AC motor， lifting power is produced when AC motor is driving the oil pump to produce oil pressure. Lighting system is powered by battery 48V(80V) to 24V voltage.

• Page 33: Electrical System Of Direct Current Driving Electric Forklift Truck

  4.2 Electrical system of direct current driving electric forklift truck (Fig.2-42) (Fig.2-42) 4.2.1 Forklift traction is AC variable-frequency motor, steering is AC variable-frequency motor controller, the dashboard display screen and AC drives adopes products from Curtis, the world’s leading supplier of electric vehicle system in the United States. The adopted AC variable-frequency motor is high efficient, durable and maintenance free, basically because it has no DC motor commutator (commutator can limit the acceleration performance of truck, especially in high speed situation, it will limit braking torque), so its accelerating ability is faster.

• Page 34: Combination Indicator

  brake can be achieved by properly releasing the accelerating pedal.The presenting back of electric power to battery prolongs the one-charge-travelling distance of it. 4、 Function of backward slip preventation on slope,when the vehicle is stopped on slope,it will slip downward the slop acceleratedly if hand brake or food brake pedal is released. The function of backward slip preventation can prevent the phenomenon of slipping downward acceleratedly and ensure that electric forklift slips downward uniformly with a low speed.

• Page 35
  Figure 2-44 CURTIS instrument 1） 、 “TRVAL”means the situation of traction controller, digital code indicates controller failure, specific code please refer to 4.4 failure analysis. 2） 、“HYD”means situation of pump controller, digital code indicates controller failure, specific code please refer to 4.4 failure analysis. 3）…

• Page 36: Fault Analysis

  4.4 Failure analysis 1232SE/1234SE Controller fault table and diagnostics guide Code Code display on display on Troubleshoot Fault cause the programmer instrument 1、motor outside U,V or Wconnection shour current Controller controllercurrentoverload Overcurrent 2、motor parameter mismatching 3、controller failure 1， motor U、 V、 W truck circuit， lead Current Sensor Current sensor failure to current leakage…

• Page 37
  large 5， battery connection is disconnected 6， the fuse is disconnected, or main contactor is not connected 1， during the process of regenerative braking, regenerative braking current lead the Voltage too high, as a battery voltage to rise Overvoltage result the performance is 2，…
• Page 38
  1. connected load is open circuit or Drive 2 output linkng coil Coil2 Driver short circuit is open circuit or short Open/Short3.3 2. connecting pin is stained circuit 3. wrong wiring 1， connected load is open circuit Electromagnetic brake or short circuit EMBrake coil is open circuit or Open/Short…
• Page 39
  1，The key start, interlock, direction, and the accelerator input HPD/Sequencing High pedal protection order is wrongly setted. Fault /operation order failure 2， Wiring, switch key, interlock, direction, or accelerator input failure 1，Emergency reverse operation is Emergenvy reverse high over, but the forward, reverse input Emer Rev HPD pedal protection and interlock of the accelerator are…
• Page 40
  8= Controller cannot detect the encoder signal, channel signals disappears 9= Motor parameter settings exceed the scope 1，motor type（Motor_Type） Motor Type Fault Motor type failure parameters exceed the scope 1，VCL and OS of the controller VLC/OS Mismatch VCL/OS not matched program are not matching 1，…

• Page 41: 5．Battery

  5．Battery Battery framework see figure 2-45. figure2-45 battery 5.1 Battery safety requirements Good ventilation is necessary. Because hydrogen and oxygen take place at the later △ period of charging battery, so, sparks will lead to explosion. There is acid mist taking place during charging,please exhaust it and cleaning battery △…

• Page 42: Battery Charging

  Rub-up dust of battery by cloth, if there is electrolyte stains, rub-up or cleanse by hot water, then dry it by cloth. Clean dirt and oxide of pole, rub-up lead and lead clip. Dredge venthole of oil inlet. Apply a thin industrial Vaseline on pole and lead clip. Check battery for liquid level.

• Page 43
  Warning: Slowly infuse strong sulphuric acid into distill water and stir liquid by a glass rod or lead cover wood stick, do not infuse distill water into sulphuric acid absolutely, otherwise, there will be liquid boiling and splashing to injure people. To be sure the polarity of connection between charger and battery is correct, that is anode to anode and cathode to cathode,a reliable connection is necessary.

• Page 44: Installation And Replacement Of Battery

  5.4 Installation and replacement of battery Battery installation shall fix fastened, prohibit to overturn; Prohibit to hammer terminal and leading clips; Avoid impact during transporting. 6. Hydraulic system 6.1 Sumarry Hydraulic system consists of pump, multiway valve, lift cylinder, tilt cylinder and pipeline ect. See figure 2-46,Hyduaulic liquid supplied by pump and multiway valve distribute liquid to each cylinder.

• Page 45
  1. Safety valve 2. Inching switch support 3. Spill pore 4. Lift timing sensor cover figure 2-47 Multiway valve outline (1) Operation of Slide valve (To tilting slide valve,for example) (a) Neutral (figure 2-50) In this case,high pressure liquid out of pump to tank through neutral (b) Push slide valve in (figure 2-51) Then, neutral chunnel is closed, liquid from oil inlet to open one-way valve flow to cylinder joint B, liquid from cylinder joint A flow to tank through low pressure chunnel, supported by…
• Page 46
  Figure 2-52 (3) Motion of tilting self-locked valve There is tilting self-locked valve in tilting cylinder valve slice to prevent mast fall down suddenly when cylinder cavity take place negative pressure and danger when mal-operating tilting valve stick. Because this self-locked valve, if even thrusting joy stick, mast cannot be tilted when forklift motor stop work.

• Page 47: Lift Cylinder And Lift Chains

  1. tilting rod operation 2. lifting rod operation 3. accessary rod operation 4. connecting shaft 5. connecting rod 6. bracket figure2-55 multiway operation (5) adjust safety valve pressure Adjusted pressure for safety is 13.5/16.8MPa Safety pressure had been set it up by manufacturer, user shall not be setup by themself.

• Page 48
  left lifting cylinder right lifting cylinder 1. anti-dust ring 2. axes seal 3.steel cap 1. O-ring 5.bearing 6.cylinder 7.piston rod 8.adjusting 9.O ring 10.spring bushing 11. circlip 12.spring 13.piston 14.support ring 15.valve seat core 16.circlip 17.hole seal 18.check 19.circlip 20.valve valve 21.O ring 22.speed…

• Page 49: Tilt Cylinder

  Normal cylinder Cut off 1.lifting cylinder body 2.pressure spring 3.valve core figure 2-57 isolating valve 6.5 tilt cylinder Ttilting cylinder,whose piston rod connects to mast through earbob,is double-acting in pattern. The bottom of tilting cylinder connects to framework with pin. There are two tilting cylinders on each side of forklift.

• Page 50
  1.cylinder 2.respirator 3.cylinder 4.cylinder flap 5.seal pad 6.filter 7.washer 8.drain plug Figure 2-60 6.7 Hydraulic oil pipeline Hydraulic system hydraulic oil pipelice. See figure 2-61。 1. joint 25-G1-Φ32 2. rubber hose (oil suction) 3. Hose clamp QC/T390-(40-45) 4．Hose clamp QC/T390-(22-26) 5.

• Page 51: Hydraulic Hose

  9. joint 8-2xM16x1.5-60° 10. hydraulic hose assembly 8-L2700-1SC-60° 11. hydraulic hose assembly 8-L3000-1SC-60° 12. hydraulic hose assembly (90°)13-L2750-2SC-60° 13. joint 12-G1/2-M22x1.5-60° 14. transition pipe welding 15. washer GB97.1-6-200HV 16. washer GB93-6 17. screw GB70.1-M6x20-8.8 18. joint 16-M22x1.5-%c25 19. rubber hose 20.

• Page 52
  lining board groove oil-in side of inlet port side of outlet port oil-out Figure 2-64 Figure 2-65 (c) Front and behind pupm cover If colour changing(brown)extent of inner surface lining sleeve is more than 150°, please replace it. (d) Check drive wheel and driven gears If abrasion badly, to replace a pair.

• Page 53: Fault Analysis

  1. pump body 2. drive gear 3. driven gear 4. front end cover 5. rear end cover 6. lining slice 7. seal 8.spacer ring 9. oil seal 10. elastic collar 11. bolt 12. washer Figure 2-67 gear pump (4) Commissioning Commissioning includes running in pump by commissioning, checking running for normal, it is better to test pump on test-bed, but testing at forklift also to be available as follows: (if pump abrasion badly or locking attributed to hydraulic liquid and being disassembled, you…
• Page 54
  Fault Cause Elimination Slide valve get stuck Break up, cleaning Lift pressure too low Oil pore jam Break up, cleaning Slide valve get stuck Break up, cleaning Vibration Pressure up too slowly Exhaust not enough Exhaust enough Slide valve get stuck Break up, cleaning Vibration Pressure up too slowly…

• Page 55: 7．Lifting System

  7. Lifting system 7.1 Summarize Lift system consist of dual mast (inner and outer mast respectively), roller lift and lower vertically, and fork. 7.2 Inner and outer mast (figure 2-68) inner and outer mast constructed by welding. Bottom of outer mast fit on drive axle by brace. Middle of outer mast connect with frame through tilting cylinder and it can tilt forward and backward actuated by tilting cylinder.

• Page 56: Roller Position

  1. load guard 2. plain washer 3. spring washer 4. bolt 5. roller 6. elastic collar for axes 7. combination roller 8. fork carriage 9. fork assembly Figure 2-69 fork carrier 7.4 Roller position (figure 2-70) There are two rollers: outer frame roller unit as well as inner frame and fork carriage roller unit, witch is fitted on outer mast as well as inner mast and fork carriage respectively.

• Page 57: Maintenanceandregulation

  1. Fork carriage 2. Outer mast 3. Outer frame roller unit 4. Inner mast 5. Inner frame and fork carriage roller unit figure 2-70 Roller position Notice: (a) Adjust clearance of side roller for 0.5mm; (b) Lubricate grease on main roller surface and working surface of mast. 7.5 Maintenance and regulation 7.5.1 Adjustment of lift cylinder See figure 2-71 It is needed to readjust journey of lift cylinder after dismantle or replace lift cylinder, inner mast…

• Page 58
  Inner mast Tyre fork carriage main roller fork Figure 2-72 (3) Lowering fork on ground and tilting it backward at max. angle. Keep both of two chains be same tension by adjusting nut which locate upper end of adjust chain. 7.5.3 Replacement of fork carriage roller (1) Place a pallet on fork and park forklift on level ground.

• Page 59: Instructionsofinstallingaccessaries

  8.2 Hoisting location for parts disassembled (1) Hoisting directions for lifting system see figure 2-75 outline dimension figure 2-75 Type Weight （kg） length×width×height（mm） FE4P50N 2000×1080×463 FE4P60-70N 2050×1180×485 (2) Roof guard hoisting directions see figure 2-76 outline dimension Type Weight（kg）…

• Page 60
  FE4P50N 480×1135×1000 FE4P60N 520×1135×1000 1250 FE4P70N 560×1135×1000 1650 (4) Hoisting for battery box See figure 2-78 outline dimension Weight Type length×width×height（mm） （kg） Lifting hole FE4P50N 980×538×760 FE4P60-70N 980×688×760 1530 figure 2-78 Battery has the function of counterweight,so users can not replace it at will otherwise it will affect the balance of entire vehicle and other performances.

• Page 61: Chapter Three Operation,Use And Safety For Forklift

  Chapter three Operation,use and safety for forklift Ⅰ、 Driving and operation There are some information for operating normally as below and it favor you about good running performance, using safely, running economically. 1. Usage of new vehicle ·All of the parking parts from the new vehicle should be reclaimed according to the establishment of local government.

• Page 62: 5．Transportingandloadingforforklift

  backrest or rigidity loading goods frame, or low lift height. 5. Transporting and loading for forklift (1) Transportation of forklift ·Transporting with truck,Wedge forklift wheel or tighten forklift by rope to prevent it moving during transportation. ·Pay attention to obey regulation of full-length, full-width, full-height of forklift during transportation on traffic road.

• Page 63: 8．Parking And Temporary Parking

  ·Do not startup or brake suddenly to prevent cargo falling down . (2) Speed slow down Release accelerator slowly. If necessary, step brake pedal down. Except emergency brake, release accelerator to make slow down slowly until parking. If even release accelerator suddenly, emergency brake is also impossible.

• Page 64: 9．Usage Of Battery

  cloth on fork prong forward dead corner. ·Pay attention for road surface slide or cave in. ·To lower fork after parking perfectly, it is very dangerous to lower fork during traveling. ·Do not jump off vehicle. ·When get off forklift, you have to face vehicle and take favour of footboard. ·Slow down first and step brake pedal down and standstill and put gearshift on “N”.

• Page 65: 10．Stacking

  ·According to 《operation and maintenance manual》of the used charger to break charging procedure. ·Do not pull out charger plug during charging, otherwise there will be spark take place to lead to danger. (2) Replace bettery When forklift has been used continuously for a working period and the battery has entirely excharged,replace the battery with another fully charged one and charge the battery been replaced.

• Page 66: 11．Unstacking

  (b) Backing forklift for distance of 1／4 length of fork. (c) Lift fork 50—100mm up and drive forklift forward for stacking to be optimum. (8) Look at rear space, backing forklift in order to avoid impact between fork and pallet or goods. (9) Ensure fork prong to be off goods or pallet, lower fork to avail driving.(from ground 150—200mm) 11．…

• Page 67: Ⅱ、Using Instruction Ofoperatingdevices

  (c) Rub anticonosive oil on bared surface of piston rod and shaft ect. (d) Cover parts prevent raining and wet. (e) Startup vehicle at least once a month, install battery, clean the grease on piston and shaft, startup engine and preheating, make vehicle move forward and backward slowly, meanwhile operating hydraulic control for several times.

• Page 68: 1． Components,Schematicdiagramforoperatingdevices

  2. Instrument unit see figure 2.4 Electrical system（ page 30） 。 3. Switches （1）Emergency stop button When emergency, press red mushroom-head button down to cut off power to stop function of traveling, turning, lifting. To resume the function,rotate the botton according to the arrowhead indication. (2)Key switch key can turn on or turn off controlling power Turn off (0FF): In this position,power is cut off and key can be inserted…

• Page 69: 4．Control

  Tail light switch is a single gear which controls on&off of the light. Pull switch up, light open; push down, light off. 4. Control Ssteering wheel①and steering wheel handlebar② Steering wheel operation is traditional: steering wheel turn right, vehicle move right; steering wheel turn left,vehicle move left.There is steering wheel at backside of forklift to make backside of forklift swing toward outside when turning.

• Page 70
  (4) Parking brake handle⑥ In order to prevent forklift from moving,when park forklift,pull up entirely parking brake handle. It is necessary to push parking brake handle to end before driving. ·When operating the parking barke handle,step down the parking paddle. (5) Brake paddle⑦and accelerating paddle⑧…

• Page 71: 5．Bodywork

  (6) Lifting handle⑨ Pull backward lifting handle,fork lifts,and push forward lifting handle,fork lowers.lifting and lowering speed depend on tilting angle of handle,the larger the angle,the faster the speed is. ·Lifting operation cann’t be made,if push or pull lifting handle when turn on ignition key. ·Don’t lower fork suddenly or stop suddenly when lowering fork.

• Page 72
  (4) Traction rod Only in the following situation shall be possible to use traction rod. ·To escape from the trouble of being not able to travel(for example wheel trapped in ditch) ·Forklift need to be loaded on or be unloaded from lorry. ·No using for towing or to be towed operation absolutely.

• Page 73: Ⅲ、Safety Issues

  Ⅲ、Safety issues Safety is your business and responsibility. This section describes the typical forklift often used in the basic safety regulations and warnings, but also applies to the door frame with special specifications. 1 Operation place and working environment (1) Ground conditions The operation place of forklift should be ground with flat and firm surface,a good ventilation is needed.

• Page 74
  Vigilant: injuries, the ambulance! Do not change parts on forklift arbitrary Read the instruction manual carefully before without permission. driving! Turn off the engine before maintenance! Understand traffic regulations Before use, please check on the truck! Do not move the overhead guard!
• Page 75
  To keep driver’s cap clean! Do not drive an unsafe forklift! Drivers should have a healthy body! Be sure your truck is safe! Work in specified area Do not drive a damaged truck! Hold tightly when get on the truck! Start forklift correctly!
• Page 76
  Adjust seat before driving! Make sure your forklift is in safe operating condition! Appropriate fasten seat belts! Always pay attention to the height of work place! Turn on lights in dark area! Do not put arm and body outside of the overhead guard during work! Avoid driving on soft ground, only Keep body under the guards!
• Page 77
  Avoid eccentric loading! Pay attention to encounter item by front fork when loading! Check fork pin position! Note the security of the work region! Do not run on smooth or slippery ground! Note the horizontal driving stability of the truck when it is un-load! Be especially careful when handling long Forbid handling people!
• Page 78
  or wide cargo! If can not see the front when turning, Use appropriate pallets or sleeper when please whistle and drive slowly. handling small objects! Do not chase each other through the traffic! Not allowed to stand on the goods! Not allowed to gaze around while driving! Do not use the forklift to do stunt! when goods is so high to keep out line…
• Page 79
  direction of others when loading,travel forward in upgrade Pay attention to the steep uphill slopes and backward in downgrade and goods lifting height! When no-load,travel backward in upgrade Note using brake when start truck on and travel forward in downgrade! the slopes! Not turn when driving on a slope! People or things moving on road should…
• Page 80
  While turning a high speed can cause People are not allowed to start in work place! accident because of unstable center of gravity! Notice the change of rated load weight Pay attention to the area where forklift before use forklift. is driven! Use the fork correctly when loading! Slow down when loading!
• Page 81
  someone in front of the truck! the elevatory fork! Do not load the goods which is higher Please bind the goods which is difficult than the goods rest. to fix before load! Do not carry the goods from forklift by Do not let people to carry the goods have manpower! been damaged!
• Page 82
  Do not extend any part of body outside Drive the truck smoothly to avoid sudden when driving! acceleration and deceleration! Must use special equipment to lift people Do not overload! safely to lift people safely to work at height! Do not lift when there is excessive wind! Not allowed to work in explosive environments! The faulty trucks should be put into the park the forklift to the indicated area!

• Page 83: 3．Truck’ S Transportation

  Do not park the forklift on the slope! When the forklift is not in use,please do the follow. — Brake — Put direction pole in neutral position. — Lower the fork to the ground — Frame forward tilt. — Take off the key 3.

• Page 84: 4．Howtoavoidoverturning,Howtoprotectyourself

  ·When lifting the truck, be sure not to wire rope and overhead guard around together. ·Wire rope and lifting equipment to be very strong, enough to secure bearing fork lift, because the truck is extremely heavy. ·Do not use the cab (overhead guard) to hoist the forklift. ·Forklift upgrade, do not enter the truck underneath.

• Page 85: Safety Problem In Maintenance

  When moving, the distance between fork and whether load or no-load,don’t turn in a high ground should less than 150mm to 200mm! speed or in a large radian ! when no-load fork is lifted,please turn with Be sure to fasten seat belts! a narrow range.

• Page 86
  (2) Precautions before maintenance ·No smoking ·Wear all protective equipment (helmets, shoes, glasses, gloves and boots), and suitable clothing. ·Wipe out the oil in time. ·When add lubricating oil, you should clean out dirty oil or dust with a brush or cloth, then add oil.

• Page 87: 6． Safety Problem In Battery Usage

  6. Safety problem in battery usage (1) No smoking ·Batteries produce hydrogen gas. Short circuit will produce sparks when lit cigarette near the battery, it will cause an explosion and fire. (2) Avoid electrical attack · Battery with high voltage, when the installation and maintenance, do not touch the battery conductor, which can cause serious burns.

• Page 88: 7．Plate

  (8) Battery electrolyte is harmful ·Battery electrolyte is made of diluted sulfuric acid, be careful when handling. ·When electrolyte adhesion conglytination on eyes, skin and clothing, it will result in vision loss and burns. (9) Emergency dealing methods ·When the accident occurred, deal according to the following methods of emergency treatment and contact a doctor immediately.
• Page 89
  Left safety mark Right safety mark Usage of forklift Forklift nameplate Lubrication system signs Load graph signs Add hydraulic oil signs hoisting signs prohibiting hoisting signs…
• Page 90
  Truck hoisting signs Prohibiting climbing signs Handbrake signs Tyre pressure signs Tyre removal signs Note signs of injury…

• Page 91: Chapter Four Truck’s Regular Check And Maintenance

  Chapter four Truck’s regular check and maintenance Conduct a comprehensive pre-inspection of forklift trucks and forklifts to avoid failure and fail to produce the life it deserves. Maintenance program is based on the number of hours listed in forklift work 8 hours a day, working 200 hours a month the case may be, in order to maintain safe operation and maintenance procedures should be maintained on the forklift.

• Page 92: Checking Procedure

  2. Checking procedure (1) Check the brake pedal Check brake condition and to ensure a fully depresses the brake pedal when the plane from the floor counting down the brake pedal travel should be more than 50mm, no-load forklift truck braking distance about 2.5m.

• Page 93
  (4) Check the steering wheel rotation case The steering wheel clockwise and counterclockwise rotating gently, check whether there is rebound phenomenon, a suitable spring trip to 50-100mm. Steering wheel before and after the trips of about 7 °, if the above situation, turn the steering wheel shall be normal. (5) Check the function of steering system The steering wheel clockwise and counterclockwise rotation, check the power steering work.
• Page 94
  (10) Check tires (pneumatic tires) Unplug the nozzle cap, measuring tire pressure with a tire air pressure. After check air pressure, nozzle mouth should ensure that gas will not leak before installed the cap. ·Forklift tire pressure is higher than the car’s; it should not exceed the prescribed pressure value.
• Page 95
  Check whether the normal bright lights, speakers is normal (when pressing the horn button, horn ring) Check whether the emergency stop is normal. left steering light is bright neutral right steering light is bright (14) Check instrument panel features Normally, after a few seconds turn the key switch, the dashboard will be the following graph shows Tips locking…

• Page 96: Ⅱ、Check After Operation

  In addition to checking lights and operating conditions, the key switch must be turned off and disconnect the battery plug before check the electrical system. Ⅱ、Check after operation After the completion of the work remove the dirt on forklift and check the forklift according to the follow items：…

• Page 97: Ⅳ、Regular Maintenance

  ·If moisture penetration into the motor, you must first remove the moisture, to prevent short circuits Moisture will reduce brake performance, brake truck briefly to drying the brake. After cleaning Ⅳ、 ·Thoroughly dry water stains on the truck (use compressed air as a example). ·Start the forklift according to the procedures.

• Page 98
  At the Check if the malfunction begin- analysis system is normal ning of 2 years （3）Motor Every- Every Every Three Maintena- Maintenance item Tools week month months months nce item (8h) (50h) (200h) (600h) (1200h) Remove the eyewinker from √ √…
• Page 99
  Every- Every Every Three Maintena- Maintenance item Tools week month months months nce item (8h) (50h) (200h) (600h) (1200h) Check clearance √ √ √ √ √ Check axis loose √ √ √ √ √ Steering wheel Check radial losse √ √…
• Page 100
  Wear of reduction gearbox √ √ connectors Damage, leakage, rupture √ √ √ pipe Loose situation of connection and clamping √ √ √ parts Leakage situation √ √ √ √ √ Check oil level, √ √ √ × oil changing. Brake Pump situation √…
• Page 101
  Check the chain tension state, whether deformation, √ √ √ √ √ corrosion damage Fuel chain √ √ √ Chain and Rivet pin and loose √ √ √ chain wheel conditions Chain wheel deformation, √ √ √ damage If Bearings of chain wheel √…

• Page 102: Regular Replacement Of Key Safety Parts

  (8h) (50h) (200h) (600h) (1200h) Measur- Overhead Installation is firmly √ √ √ √ √ guard and hammer load Check the deformation, backrest √ √ √ √ √ cracking, damage Indicator light for Work and installations √ √ √ √ √…

• Page 103: Ⅴ、Area Lubricated And Lubricant Recommended

  Ⅴ、Area lubricated and lubricant recommended 1. Area lubricated ○：Change FO： Hydraulic oil ○：reinforce GO： Gear oil □：Check and adjust CG： Grease BO： Brake fluid W： Distilled water Lifting chain CG Direction pipe column CG Tilt cylinder pin CG Battery □W Mast bearing support CG Drive axle □CG Brake cylinder BO…

• Page 104
  Maintenance record Date Maintenance content Noter…
• Page 105
  Noblelift North America 2461 S. Wolf Road Des Plaines, IL 60018 T: 847-595-7100 F: 847-595-7200 parts@nobleliftna.com www.nobleliftna.com…

Регионы с которыми мы работаем: Севастополь, Симферополь, Керчь, Евпатория, Феодосия, Москва, Санкт-Петербург, Новосибирск, Екатеринбург, Нижний Новгород, Казань, Челябинск, Омск, Самара, Ростов-на-Дону, Уфа, Красноярск, Пермь, Воронеж, Волгоград, Краснодар, Саратов, Тюмень, Тольятти, Ижевск, Барнаул, Иркутск, Ульяновск, Хабаровск, Владивосток, Ярославль, Махачкала, Томск, Оренбург, Кемерово, Новокузнецк, Рязань, Астрахань, Набережные Челны, Пенза, Липецк, Тюмень, Тобольск, Ишим, Ялуторовск, Заводоуковск, Сургут, Нефтеюганск, Нижневартовск, Ханты-Мансийск, Когалым, Нягань, Мегион, Радужный, Лангепас, Пыть-Ях, Урай, Лянтор, Югорск, Советский, Белоярский, Покачи, Пойковский, Фёдоровский, Излучинск, Белый Яр, Междуреченский, Новоаганск, Ноябрьск, Новый Уренгой, Надым, Салехард, Муравленко, Лабытнанги, Губкинский, Тарко-Сале, Пангоды, Уренгой.

Сертификаты качества штабелеров Noblelift

Популярный китайский производитель Noblelift производит высококачественные электрические штабелеры различных моделей. Продукция компании соответствует определенной ценовой политике и удовлетворяет запросы потребителя, который предпочитает стабильность производственного процесса. Помимо этого, штабелеры Noblelift показали свою надежность при их длительной эксплуатации, а также в тяжелых климатических зонах России. На фоне других производителей аналогичной складской техники Noblelift занимает лидерские позиции: примерно 30-35% продукции используется на российских предприятиях.

Погрузчики от компании Noblelift – это разновидность складской техники, которая применяется для транспортировки и подъема груза на паллетах на определенную высоту при стеллажной форме хранения. Электрические штабелеры работают за счет наличия электрического мотора, работающего от тягового аккумулятора. Все процессы этого вида техники проходят автоматически и быстро. Машина маневренна, компактна, прекрасно работает в узких проходах между стеллажами, позволяет быстро выполнять складские задачи и обеспечивает высокую производительность труда.

Основные виды электрического штабелера

• самоходный с откидной платформой для оператора
• самоходный ведомый, который сопровождается оператором с помощью длинной рукоятки
• самоходный с кабиной для оператора

При выборе штабелера необходимо руководствоваться следующими критериями:

• грузоподъемность. У большинства моделей она составляет 0,5-2 тонны
• производительность за одну смену без подзарядки аккумулятора
• ширина коридора между стеллажами. Самоходные модели работают в коридорах шириной более 2 метров
• тип управления
• поверхность. Имея небольшой клиренс, автокар предназначен для работы на ровных поверхностях

Все погрузчики компании Noblelift изготовлены на китайском производстве и соответствуют всем действующим нормам и стандартам, которые необходимы для безопасной и эффективной работы. Кроме того, техника прошла успешные заводские испытания в экстремальных условиях и при различных уровнях температуры. На все модели распространяется гарантийный срок производителя – 3 года. Цена техники напрямую зависит от ее технических характеристик и быстро благодаря высоким показателям производительности. В комплекте с гидравлической тележкой штабелер способен заменить погрузчик со средней грузоподъемностью.

NOBLELIFT Forklift Truck Manuals PDF

Noblelift Forklift Trucks History

Some NOBLELIFT Forklift Truck Operating & Parts Manuals PDF are above the page.

Noblelift Equipment JSC Ltd. is one of the world leaders in the production of warehouse equipment and forklifts, having a full range of different warehouse equipment for solving warehouse and logistics tasks.

The main production facilities are located in China, in addition, additional production is located in Malaysia, where mainly hand pallet trucks are manufactured for the company’s European customers.

Noblelift supplies and promotes warehouse equipment and equipment for warehouses around the world. Noblelift subsidiaries located in Germany, the United States and Russia are designed to support the company’s customers in local markets.

In total, the structure of the company Noblelift Equipment employs more than 1,400 employees in China, Malaysia, Germany, USA and Russia.

Warehouse equipment and equipment of the Noblelift brand is distinguished by an excellent combination of price and quality, since the main components of electrical equipment are supplied by recognized world leaders in their segments: Curtis, Zapi, Schabmuller, Kordel, Schaltbau, Pepperl + Fuchs, HPI, Brevini, ZF, Intorq, Amer, Wicke and others.

Many customers around the world who use Noblelift equipment have appreciated the advantages and reliability of the equipment.

Источник

HANGHCA Forklift Truck Error Codes

HANGHCA Forklift Trucks Fault Codes DTC list

LED code — PROGRAMMER LCD DISPLAY — EXPLANATION — POSSIBLE CAUSE

1, 2 HW FAIL SAFE1-2-3 Self-test or watchdog fault Controller defective.

1, 3 M-SHORTED internal M- short to B-

FIELD OPEN .Field winding fault

1. Motor field wiring loose.

1,2. Motor field winding open.

ARM SENSOR armature current sensor fault 1．Controller defective.

FLD SENSOR Field current sensor fault 1．Controller defective.

2, 1 SPEED CONTROL

FAULT VSC signal exceed range

1．VSC input wire open.

2．VSC input wire shorted to B + or B-.

3. Throttle pot defective.

4. Wrong throttle type selected.

2, 3 START LOCKOUT starting sequence wrong

1. Improper seq. of direction and throttle inputs.

2. Wrong START LOCKOUT type selected.

3. Misadjusted throttle pot.

4. Sequencing delay too short.

3, 1 CONT DRVR OC cont. driver output over current

1. Contactor coil shorted.

3, 2 MAIN CONT WELDED welded main contactor

1. Main contactor stuck closed.

2. Main contactor driver shorted.

3, 3 PRECHARGE FAULT internal voltage too low at startup

1. Controller defective.

2. External short, or leakage path to B- on external B + connection.

3, 4 MISSING CONTACTOR missing contactor

1 Any contactor coil open or not connected.

CONTINC main contactor did not close 1 Main contactor missing or wire to coil open.

4, 2 OVERVOLTAGE overvoltage

1. Battery voltage> overvoltage shutdown limit.

2. Vehicle operating with charger attached.

3. Battery disconnected during regen braking.

4, 3 THERMAL CUTBACK Over- / under-temp. cutback

1.Temperature> 85 or

Forklift Truck, Warehouse Equipment, Stacker & Reach Truck Service PDF Manuals, Wiring Diagrams, Parts Catalogs

Forklift Trucks, Stackers & Reach Trucks Error Codes DTC lists

SEARCH

Lê Thị Bông (Tuesday, 31 May 2022 10:28)

I want to download Catalogue of Toyota forlift seri 8FB25

Amne mkh (Friday, 20 May 2022 09:58)

Im looking for CLARK CEM20 service manual my display show A 46 alarm and de forklift dont move
Can someone help me please

Sadik (Thursday, 19 May 2022 09:43)

Лобанов Сергей николаевич (Wednesday, 18 May 2022 03:56)

Здравствуйте. Помогите, пожалуйста, электрической схемой на TCM FB15-H5. Спасибо!

Manual (Sunday, 15 May 2022 17:37)

BT C4E (Sunday, 15 May 2022 17:25)

Gregory Rynne (Friday, 13 May 2022 00:47)

Hi I am looking for a Service Manual for a BT RR M14

Can you please assist.

Buenas tardes necesito informacion de un montacarga TCM FR-8, manual de servicio, tengo la falla 101 y 102, muchas gracias.

Evgeniy (Monday, 09 May 2022 14:04)

Здравствуйте, подскажите пожалуйста по ошибке 357 kalmar 12-120 dce или скиньте пожалуйста мануал по устранению неполадок.

Carlos (Saturday, 07 May 2022 05:22)

I would like to acquire a manual for a Pseries 330 Forklift

Bonjour
nous avons besoin d’un catalogue complet pour chariot elevateur HANGCHA pour commande des pièces 2T,3T,4T,5T, 12T

Santo (Wednesday, 20 April 2022 16:36)

Please,help.
Manual service & Part catalog Mitsubishi FD50K.

majid (Tuesday, 15 March 2022 14:55)

Hi, I Need Error Codes For Atlet Reach Trauks ULS 120
E 48
E 96
E 109
Please help mi
��

Steven (Friday, 18 February 2022 19:29)

Necesito el manual de taller de un montacarga Komatsu model FG25T-12 donde lo puedo descargar en pdf

Edwin Muller (Wednesday, 12 January 2022 11:47)

GOOD DAY WHERE CAN I LOOK FOR N SERIAL NUMBER ON CHASE IF SERIAL PLATE IS LOST

Matt (Wednesday, 12 January 2022 03:26)

Hi im looking to diagnose problem on my JLG 3394RT SCISSOR LIFT IT WONT START WHEN I TURN ON THE IGNITION IT SHOWS THERES POWER AND ALL BUT NOTHING ELSE THERES A CODE IT FLASHES 4 BLINKS AND THEN 3 BLINKS IM WONDERING IF I COULD GET SOME INFORMATION ON THIS PLEASER.

Samuel (Monday, 03 January 2022 18:53)

Forklift Truck Manuals & Brochures PDF

Doina (Tuesday, 28 December 2021 12:23)

Where can I find the mentenance manual for SHANGLI CPCD25?

AAA (Saturday, 25 December 2021 22:19)

Our DP150N Cat lift truck no lifting tilting or down the load.and many people open the control and play with the spool. how i can know return to the original position of the spool

mg lwin (Thursday, 23 December 2021 05:16)

DTC108904 (Tuesday, 14 December 2021 09:47)

The platform reports error DTC108904, runs slowly and does not lift.

Mile Trajkov (Thursday, 09 December 2021 10:13)

Manual for MT 1337/SLT?

علاء البوهى (Monday, 06 December 2021 13:51)

أريد برنامج صيانه ونش شوكى كهربائي

Vern (Thursday, 02 December 2021 13:56)

Hello,
LCD displays 208 and the lift does not lift, tilt, side shift, or move forward/reverse.
Yale: ERP040THN36TE084.
Thank you.

sameer (Thursday, 02 December 2021 11:45)

i have a Reachtruck with Turtle mode, can i know how to remove that?
thanks in advance

Роман (Friday, 26 November 2021 13:14)

hyster H3.0FT оerror 168-3 please decipher the error code

Stuart Fields (Monday, 01 November 2021 21:11)

I’m looking for a maintenance manual for an 8,000# Kalmar fork lift. There is a metal tag that has a number: 110622A and another number:250X15-16PR

Juris (Friday, 29 October 2021 08:46)

Forklift kalmar error 1239

CONSTRUCTORUL CANDA SRL (Thursday, 28 October 2021 14:52)

Buna. caut pt NOBLELIFT ECL15B ANVELOPA ROATA MOTOR. AM APRECIA DACA NE DATI UN MANUAL. MULTUMESC.

Jonathan Carpenter (Thursday, 28 October 2021 14:08)

Am looking for a service manual & parts manua for a yale forklift GDP 050

Matt (Monday, 25 October 2021 16:16)

This unit has a message
Software error on dash
Doosan
B20T-7
FBA11-2400-01278

ANTONIO (Monday, 25 October 2021 14:51)

BUENOS DIAS:
ESTOY TRATANDO DE CONSEGUIR EL MANUAL DE PARTES Y MANUAL DE SERVICIO PARA UN PETTIBONE MODELO 304B

Dave (Sunday, 24 October 2021 04:58)

Doosan br18s-7
On dash display says
Software

Richard (Friday, 22 October 2021 10:30)

I need information for master cylinder/wheel cylinder, hydraumlic pump and oil seal, thank you.

I need a SERVICE manual of FERRARI CVS FH28 electrical diagram. Because there’s a lot of FMI code on the monitor.
Please help me. Or send me on my Gmail address:regeneregala@gmail.com

Dc (Wednesday, 13 October 2021 21:19)

good morning can you help me with the caterpillar gp40n1 fault code manual Please

Сергей (Sunday, 10 October 2021 00:15)

Добрый день мне нужна инструкция по ремонту и эксплуатации Ричстакер Svetruck 16CS 4H и вилочный работаю механика в порту

fadi (Saturday, 09 October 2021 23:56)

hallo I find problem in forklift still fixed looked image display not input menus parameters in the serial number 57310052646
thanks

fadi (Saturday, 09 October 2021 23:50)

I find me problems in forklift still fixed looked image display forklift

Mustafa Altundaş (Tuesday, 05 October 2021 17:00)

Merhaba DC15 MODEL ŞARJLI TRANSPALET VAR YÜRÜYOR AMA KALDIRMIYOR VE İNDİRMİYOR YARDIMCI OLABİLİRMİSİNİZ ACABA

engin (Tuesday, 05 October 2021 12:10)

we’ve one still exu-s 22 model forklift. we get an error code e447 and e449 .what does it mean? I couldn’t find any information. It look like CAN bus, but I am not sure. pls help.

michael ringer (Tuesday, 28 September 2021 17:33)

I need the wiring diagram for a Chery FY-35 forklift

Ismail mohamed (Tuesday, 28 September 2021 15:41)

Good day can i please have fdc 300 terex fantuzi correct specs , that is hydraulic tank capacity,

игорь (Wednesday, 22 September 2021 12:20)

ищу коды ошибок феррари 478

Robert Evans (Monday, 20 September 2021 21:04)

Looking for a komatsu fg25c owners and shop manual

Tony MacNeil (Wednesday, 01 September 2021 15:08)

Do you have an operator’s manuel for a Yale GLP050

Ahmed_assem (Wednesday, 25 August 2021 11:50)

need a price offer about shangli 35 and do u have an office in egypt
ahmed_assem_hellwan@yahoo.com

Justin (Friday, 20 August 2021 17:39)

Hello I have a hyster 155 turbo diesel model H155FT series no. K006V01652K its throwing error code 321-15 and I can’t find what it means. The lift sounds like it’s knocking an barely moves at full throttle just started running like this out of no where in the middle of use so I shut it down instantly. Please any info would be greatly appreciated thank you.

Pericles Neves (Wednesday, 18 August 2021 15:30)

Hi, im Senior Technician from de Engineer department of Enapor, shippment and ports enterprise from Cabo Verde, around the west coast of africa
We are having eletric problems with circuit of the some forklifts, so we would like to request the circuit datasheet for the Toyota Forklift model 02-7FDF30 / FSV E811
We are enapor and we have ship ports in all of Cabo Verde we also have more than 160 forklifts at our service. all tipes of forklifts.

Malcolm Campbell (Tuesday, 03 August 2021 01:12)

Hi do you do a repair manual for a Yale 1978 forklift model no G51C050NFS/90, serial no AAM005280

sunshine golf (Monday, 02 August 2021 18:56)

what does 1T mean

Anton (Friday, 30 July 2021 11:07)

Вылазит ошибка 676-4 подскажите что значит, погрузчик не едет

Rustam (Tuesday, 27 July 2021 13:58)

Hyster 3.0XT, Err 696, можете отправить коды ошибок, спасибо заранее.

Limor (Monday, 26 July 2021 14:42)

What is the telephone number of the customer service department in Sweden

Chester (Wednesday, 21 July 2021 19:10)

I have an older Yale lift with ID # G 71021, FG 20 PS Engine id# UA1484CC-S313156 can you tell me where to find Manual on parts esp for transmission gears?

RYAN (Tuesday, 20 July 2021)

hello, i have a hungcha CBD15 pallet jack, when full speed in reverse cuts out and throws flash code 4,2 have checked voltage to motor 23.4v when faults

Tarek (Monday, 19 July 2021 13:20)

Hello
I have this forklift
TS2510329-2016
3500 KG
How I can get catalog

What ia the specification of the transmission oil used in the 3 ton Liugong forklift please?

nitin shah (Saturday, 10 July 2021 13:48)

call on thise no — 989006038

I’m interestiing yo know about parts dalian reachstacker

Karan goel (Thursday, 08 July 2021 09:20)

we require a forklift for paper and packaging purpose.
we need 2 tons machine with diesel engine.
kindly provide us the best quote to us with all the specifications.

thanks
regards
Karan goel
9599888859
kara..goel94@live.com

bonphem@yahoo.com (Wednesday, 30 June 2021 12:14)

We need the spare parts manual for manual forklift with model number D30NXP

Henry Cabansag (Friday, 18 June 2021 08:36)

I need please maintenance manual of BT HWE 100 with error code explanation. Appreciate your help

Tengo una Carretilla eléctrica marca Yale Modelo MPB040, Serie B827N40489H y me sale un código de error AL 21. La carretilla comienza a pintar y sale el código AL 21, luego sale 0 y se bloquea.

Iso Opa (Saturday, 12 June 2021 03:22)

I’m Iso a Automotive Technician from Papua New Guinea.
I need a Maintenance Manuel or Electrical Schematic for Hyundai forklift model 50D-7E.

Your help will be highly appropriated.

giorgos (Saturday, 05 June 2021 05:57)

Good morning I would like your help with these codes that this lift machine produces OM CL 10.5

Alarm codes EP102 and AL79

Thessaloniki Greece
kourouklidis@gmail.co

Carlos Gomez (Saturday, 29 May 2021 15:52)

Q tal tengo errores en un hangcha cqd20 ac4
Error de dirección 3.6
Error de tracción 3.1 3.2
Favor su ayuda
carlosgomezballadares@hotmail.com

Hi. I have just purchased a 1998 Fiat G20 forklift. I’m trying to get an user/ maintenance manual.
I hope you can help.

Kind Regards
Kingsley Baker

Jonathan Gill (Friday, 21 May 2021 16:58)

tcm ftb16-7 failure code 110 ?

Christer Aspgren (Tuesday, 18 May 2021 15:22)

Hej. Jag har en KALMAR EB 3 LB där helt plötsligt inte hydralpump/motor inte startar. Hittat div säkringar men alla hela. Har inte minus till själva pumpen. Någon som har ett tips på vad det kan vara. Funkade helt okej, nu stått i ca 3 månader o nu död. Trucken går fram o back men ingen hydral igång. Mvh. CA

SINDIA MARTINEZ (Monday, 10 May 2021 18:43)

HELLO I NEED USER MANUAL FOR STILL RX20-16 FROM YEAR 2009 IN SPANISH PLEASE THANK YOU

i have a Fait diesel forklift & there’s a problem with forward & reverse travel. . the Model is D20. serial no 5133311327. rated .capacity .2000.year 1999 .Fiat OM Carrelli . Elevatori S P A .Kind regards Joe

Fungai mukaronda (Saturday, 08 May 2021 03:21)

I have a SMV forklift. SL32-1200A the forks are not lifting . can I have the hydraulic circuit diagram

James (Friday, 30 April 2021 11:51)

Hi guys I drive the EVT325 it decided to die on me last night with codes e3160.1, e3167.1, e0504.30, e2305.1 and e3305.1
Any idea on the issue the truck didn’t feel unsafe to drive but I would like not to change if the matter can be fixed. TIA James

Shane (Thursday, 29 April 2021 18:04)

Hey looking for info on cat branded jungheinrich 2epc6000 forklift with a code e0640.1 and stuck in turtle mode replaced broken battery door switch and filled Batterys and charged

Javi (Wednesday, 28 April 2021 11:50)

El display de mi horquilla de 8 T Modelo Veracitor GDP80SVX pone «Fallo 157-1»
¿Qué es ese fallo?

Ryan Weir (Wednesday, 21 April 2021 14:47)

Looking for the service manual for a yale pallet jack MPB040ACN24C2748
Need to know what the voltage is supposed to be at the drive motor

victor Manuel (Saturday, 17 April 2021 12:43)

I need to know all error code about Hyster E2.5 XN (A268n110268).

I have two error code and I don´t kwon the description. They are : 12332 and 12810.

my email is victormmoyamor@gmail.com

Adam (Wednesday, 14 April 2021 14:28)

Do you have parts manuals for a Crown WP3010 PPT?

pihou ducker patcheli (Friday, 09 April 2021 11:04)

Hello, I have a problem with an H18-20XM-9 cart which displays an error code T0102 and I cannot engage any gear. How do I repair it?

Dfg 670 (Saturday, 20 March 2021 13:35)

Hello i don’t know how to reset the maintenance service manual please help me .

Peter (Thursday, 11 March 2021 15:51)

Hi I bought a MP20 palettruck and I don’t know how to reset the maintenance service
Please advise
Thank you

Ghaith Amro (Wednesday, 10 March 2021 12:20)

I have a JUNGHEINRICH forklift FK12 SLT 100. I require a service and electrical manual for it.

email: ghaithamro1@gmail.com
or ghaith.amro@libanlait.com (if file smaller than 3mb)
BR

Donald Acosta (Thursday, 04 March 2021 22:30)

I have a Doosan G25E-5
need a service or maintenance manual,
Also Hyundai 50D-72

ALBERTO GONZALEZ (Wednesday, 03 March 2021 20:10)

Hi,
Do you have the parts manual DP40N?

Rafael (Monday, 01 March 2021 20:11)

Necesitaría los dtc de Yale veracitor

Podéis ayudarme
Mi correo es yomismolider@hotmail.com

Rj (Thursday, 25 February 2021 19:20)

Sumitomo Reach Truck B05 Error. How to fix?

arnel (Thursday, 25 February 2021 04:42)

yale electric forklift counter balance model fb25rz no travel error a01

Frank (Sunday, 21 February 2021 03:16)

Looking for owners manual for Clark forklift SN CFY 80-73-645-1264

Samuel (Saturday, 20 February 2021 14:07)

Que tal. Tengo un yale Mpb 040 y me presenta un error quisiera saber que es. Flt30033

Alaa Hawash (Saturday, 20 February 2021 13:01)

F16 Shift lever error

sylvain (Friday, 19 February 2021 17:56)

a216 on esp
a234 on traction
trouble codes on a j1

Jeff Goodnight (Wednesday, 17 February 2021 14:48)

Sellick model slp60k4e-2 no throttle response just idles

jason (Wednesday, 17 February 2021 09:53)

What caused my forklift out of order because of SENSOR CURRENT HYD?

Jim Crothers (Tuesday, 02 February 2021 17:43)

What’s the year of manufacture for these CAT fork lifts:
T80D ser# 5KB05199; V50C SER# 39Y01833; C6000 SER# AT83F01005; NR4000 SER# 5NR3539714. Any help will be greatly appreciated.

Nazif HOTI (Thursday, 28 January 2021 09:48)

parts catalog for T TX51erex

fonseka (Wednesday, 20 January 2021 16:06)

i have unicarriers forklift when i aply servise brake poore and padal was very tide but i check preshur not drope can i have hint

frank dildine (Tuesday, 19 January 2021 15:20)

trying to figure out what error code #522655-1 means and how to fix the problem

joe wood (Thursday, 14 January 2021 13:36)

looking for code list for Hyster E35Z F114. Not sure of code Dash blurry. 63 65 68

David Duhovis (Thursday, 14 January 2021 02:54)

What is a «6K error code inform service mean for the Raymond two pallet high rise truck

Mirza (Wednesday, 13 January 2021 09:33)

I’m facing this code H4914 on my Linde forklift.
Plz diagnosis this fault on my email. Many thanks

Talha (Wednesday, 13 January 2021 09:22)

I have Linde forklift. It is showing xh4914 fault code on display. What does it mean? Plz help me

Talha (Wednesday, 13 January 2021 09:19)

I have Linde forklift. it is showing xh4914 fault code on display.what does it mean? Plz help me

Robert Tosh (Tuesday, 12 January 2021 00:58)

Trying to find information on a Hyster Turret truck that won’t move. Please email me at etosh@forkliftsystems.com

LT Anil Yadav (Monday, 11 January 2021 11:41)

New 10 ton forklift

Mouh mouh (Thursday, 31 December 2020 15:00)

Hi there !
i have this error number (E342) on my still exu-s22 and i cant find anything on the web, can you help diagnose my situation?
the steering is functinal btw
thanks

Atif Rasheed (Wednesday, 30 December 2020 16:01)

Hi,
I needs jungheinrich power pallet repair manual model is ere 225.

Peter Doerksen (Tuesday, 29 December 2020 20:00)

We have a Raymond Reach Stananddup forklift Model 425-C40TT and we just error code 8-F and the fork lift is still functional except lift up/down. is this a relatively simple repair or software issue. Is an error code listing for this model available.

Francisco. Javier davalos. (Tuesday, 22 December 2020 05:44)

Search. Service manual,fork,lift, pettibone Mercury modelo 201L-electric schematics. WhatsApp 4499308460 Aguascalientes. México.

LUISCAMARGO (Monday, 21 December 2020 19:15)

HOLA TENGO UNA KALMAR DCG160-9 CON EL codigo 6720 alguien me puede compartir esos errores por favor

ROB (Monday, 21 December 2020 03:26)

malfunction code 1815 on my 2012 TCM FG25T3

Larry Setzer (Thursday, 17 December 2020 22:47)

Raymond pallet Jack model model 8400 S#840-07-75418 need to know what C-62 code is

Hans (Wednesday, 02 December 2020 21:56)

Ik zoek info van een tormaq tereinheftruck 4weel drive hij is van spaanse makelij met een lombardy 3 cil diesel graag een oners manuel

Bilal Jafar (Wednesday, 25 November 2020 05:47)

Hello, we have 39 Forklifts, but unfortunately we have no parts and engine manual,
would you please provide these manual.
FG35T9 3.5 Ton LPG/Gasoline
FG35T3 3.5 Ton LPG/Gasoline
FB25-8 2.5 Ton Battery Opt
FG20C3 2 Ton LPG/Gasoline

please share me on this Email
bilal734@gmail.com

Jamil Khan (Tuesday, 24 November 2020 12:04)

i have 3 ton electric fork lift. showing error code 38. pl advice

jared stahr (Sunday, 22 November 2020 23:47)

did not show computers trouble codes

Aseel (Friday, 13 November 2020 19:59)

I have yale electric pallet ridder Model: MP20XUX
The erorr code is (*******)
i can lift the fork but i cant operate the pallet ridder.
help please

OMAR (Friday, 06 November 2020 20:35)

PLEASE QUOTE PARTS MANUAL CAT GC70K FORKLIFT IN PDF

Dinesh (Friday, 06 November 2020 00:24)

Godrej stacker MHE showing Fault 29

Jack Mennen (Thursday, 05 November 2020 20:57)

Our Hyster forklift is showing fault code Fault 522760-4.
What could that be.

Regards
J Mennen

OLLI (Thursday, 05 November 2020 05:34)

UNICARRIEN ERROR CODE 436?
P/CONT TEMP SENSOR

LIFT KNOB DONT WORK WHEN ERROR CODE APPEARS..

Suresh (Saturday, 31 October 2020 07:20)

Nissan battery forklift 558error code

A Cayume Hakh & Sons (Friday, 30 October 2020 13:45)

Hi Good morning
I have a hyster forklift H3.0TX, serial # A380B05433T,
there is an error d000, the forklift starts but cant go forward, reverse and there is no hydraulic functions too.

can u help out please

ståle (Wednesday, 28 October 2020 12:46)

The el handbrake fail to be released. bt 1, 5 tpn diesel

DANNY (Tuesday, 27 October 2020 20:13)

WHAT IS CODE20 ON A MPW080LEN24T2748 TYPE E INDUSTRIAL TRUCK

JAMES (Tuesday, 27 October 2020 05:17)

CAT TELLEHANDLER (MAINITOU) FAULT CODE 437 , 102.2 WHEN SECOND GEAR SELECTED AND MACHINE UNDER LOAD NO FAULT IN FIRST GEAR

omar (Wednesday, 14 October 2020 20:11)

hello I have a fault with a boon jlg 450aj that does not perform some functions until I make the modifications with the value handset but performs the other functions very furte and the potentiometer does not reduce them to the minimum point

Tony (Wednesday, 14 October 2020 15:30)

We have a caterpillar 50 Volt electric forklift. It has worked great for several years but yesterday the front panel display went dead and it won’t do anything. Battery voltage is 50 VDC. Check stab lock fuses and all are good. Any ideas?

Jenesis (Monday, 05 October 2020 09:04)

Can i ask for a manual of NICHIYU FBRMW15-75 forklift? thanks

JD (Friday, 02 October 2020 20:48)

When I first turn on my battery disconnect switch the MFI light is light but when I turn just the key off and back on it goes away. As long as I keep the Battery disconnect switch on. No code.

Juan (Thursday, 01 October 2020 17:07)

Hóla.Necesitaría que me proporcionaran el esquema eléctrico de una carretilla Yale VE-16 del año 1980 aproximádamente.

Piotr Sokołowski (Thursday, 01 October 2020 15:48)

Hello,
Need the rest of Tailift FD-FG 15-35 Parts Manual. Need the number for engine cover for Tailift HFD25.

Jamie Calvert (Tuesday, 29 September 2020 01:20)

I’m a Supply Tech Lead (OA) for Sierra Army Depot, Herlong, Ca our Motor Pool is requesting CPCD30-KU6 operation and service manuals. Can you assist me with this request?

Jonathan (Thursday, 24 September 2020 22:45)

need a manual for a TCM FRB9 reach truck. Or at least a wiring diagram.

Donlie McMullin (Friday, 18 September 2020 21:02)

I have an early model Ingersoll Rand Fork lift truck RT 708H. I need an operators Manual BAD.

Kieu Beggs (Friday, 18 September 2020 14:55)

I need the manual for Big Joe Walk Behind Electric Stacker/ Walkie Forklift CB-22-128.
Thank you,

Mike (Friday, 18 September 2020 00:53)

Hydraulic interlock Return to neutral
Any Advice ?

Sidney Kleinsasser (Tuesday, 15 September 2020 16:57)

i have an old raymond DSS 3500.
it is throwing an error code 80 and and says drive error. do you have any ideas what the problem is?
thanks,
sid

Arthanayaka (Wednesday, 09 September 2020 05:42)

Dear Sir,
I have Komatsu FB20RL-4 Reach Truck.
Suddenly Came E 39 Error code & Not operating Hydralic operating lever.
Please help me solve this.
Thanks.
Arthanayaka.

FAbio (Sunday, 06 September 2020 00:07)

I need Maximal FB15 userguide and error codes guide.
Help me .

Shawn (Thursday, 03 September 2020 17:49)

Have yale model MPB045VGN24T2734 with wrench light on display reads EmerRev Release what does this mean

Kylie Soltysik (Thursday, 27 August 2020 19:02)

I’m looking for a Hyster xa-60 manual. Can you help?

Aurélien (Wednesday, 19 August 2020 17:39)

I search the opérator’s manual and error code list for BT SWE 120?

Renay (Tuesday, 18 August 2020 05:01)

Hi,
I am chasing a parts manual for a Dalian Forklift CPCD135. I am needing a list of all the filters please

michael jackson (Tuesday, 28 July 2020 15:01)

I have error code 524213-3 on hyster model H50FT What does this mean?

Bill (Tuesday, 21 July 2020 01:37)

I have a 2002 Crown FC4020 / We are getting an error 52 code. What does this code mean?

Chris (Friday, 17 July 2020 07:12)

Hi. Komatsu 15 three wheel forklift error 45?

keithandleslie6614@gmail.com (Monday, 06 July 2020 14:32)

i need manuals or some info on a electric caterpillar forklift. model # E3500- ac. serial # A4EC150235.

JOBYJOSEPH (Thursday, 25 June 2020 10:31)

EP20NT Model
Error Code #47

Дмитрий (Friday, 19 June 2020 10:21)

Может кто помоч с кодами ошибок на caterpilar ep 16 nt, заранее очень благодарен

Дмитрий (Friday, 19 June 2020 10:18)

Cat ep 16 nt erro code 42, что это значит, можете помоч?

Pavel (Thursday, 18 June 2020 09:18)

I have Still R70-30 Error code 197. What does it mean?
can you help on this. pavel-shhepkin@yandex.ru

Georgel (Wednesday, 10 June 2020 15:44)

BUNA ZIUA COD EROARE 32 ELECTROSTIVUITOR LINDE E15Z-02 FUNCTIONEAZA HIDRAULIC . NU FUNCTIONEAZA INAINTE SI INAPOI POATE

Sam (Wednesday, 10 June 2020 03:36)

I have FB15-7 TCM Electric Forklift and its charging not working.At onboard charging panel start button LED always blinking & its transformer not getting on after fix charging cable.
can you help on this.
orex.eng@gmail.com

Keegan (Wednesday, 03 June 2020 19:26)

Hubtex Sideloader
Just changed operator side hydraulic pump and now it’s out of whack, anybody know how to calibrate

Georgel (Wednesday, 03 June 2020 10:51)

Buna ziua ma poate ajuta cineva am un electrostivuitor LindeE15Z-02 Functioneaza hidraulic, nu merge inainte si spate imi apare un cod 32 cand pun contact uneori merge dar nu mult timp multumesc

michal bernat (Tuesday, 02 June 2020 11:39)

Good morning.
I am looking
Spare parts catalogs, Service & Operation Manual,Reparier manuals

Manitou Mrt 2150 Privilige
year 2009
Nr. 756255

do you have one for this machine?

Jonathan (Tuesday, 26 May 2020 20:33)

Hi, I’m trying to understand how Jungheinrich does it’s canbus termination. I am working on an EFG forklift. The bus measures 130 ohms. There is a resistor on the armrest/pilot. According to the manuals the other resistor should be on the display. There is a resistor on the display but it’s connected to a different can_lo than the main bus. Makes no sense.

Henri (Saturday, 09 May 2020 15:30)

hhoeghcl@gmail.com (Sunday, 26 April 2020 09:14)
Dear Sir/Madam

We have a BT RRE 140M. year 2008 Secondhand Reach Truck but did not get the operator’s manual. Can you please tell where can we get/buy this operator’s manual.

I thank you in advance for your help in this matter

Frank D (Wednesday, 06 May 2020 17:38)

I have a Mitsubishi FG20CN and the errorcode E30 on the dashboard.
What does this code mean.
Thx in advance

Jeremy (Thursday, 30 April 2020 19:40)

Yale lift truck msw040sfn
Error code 208. What does it mean? Batteries are full. Machine drives forward and reverse. Forks go side to side but do not lift

Jay (Thursday, 30 April 2020 15:24)

Raymond Reach truck- R40tt
Code 59. Anybody know what this means? Thanks!

hhoeghcl@gmail.com (Sunday, 26 April 2020 09:14)

We have a BT RRE 140M. year 2008 Secondhand Reach Truck but
did not get the operator’s manual. Can you please tell where can we get this operator’s manual.

Joaquin (Thursday, 23 April 2020 15:46)

I have Raymond electrical pallet jack, model 8210, code C380. Please somebody to help me.
Thank you.

Pavel (Tuesday, 21 April 2020 12:05)

JUNGHEINRICH EFG 215
how to reset the service interval

Federico (Saturday, 18 April 2020 12:25)

Error code 4371 jungheiric model ece225 hp year 2009

Dubarth. (Wednesday, 15 April 2020 05:00)

Nissan forklift.
VCM Model: 29310GG23A
P07 MP communication error P03 VCM communication error
what triggers these errors and how do we fix it please?

Dubarth. (Wednesday, 15 April 2020 04:55)

P07 MP communication error P03 VCM communication error
what triggers this errors and how do we fix it please?

Doosan error code (Monday, 13 April 2020 20:56)

Asadullah (Thursday, 09 April 2020 10:14)

Hello, on Dalian DC Electric Fork Lift there is a symbol of spanner flashing , It can’t do anything any help please? «asadbbr@gmail.com»

Manuel (Tuesday, 31 March 2020 05:41)

Raymon pallet jack no se mueve ni para adelante y rebesa se hoy como si el motor estuviera laquiado si alguien save que pueda ser

Julio (Tuesday, 17 March 2020 20:24)

Me salta error E 43, si alguien me puede decir q significa le agradezco.-
logisticaeltrebol@outlook.com

JOBYJOSEPH (Tuesday, 17 March 2020 13:12)

EP20NT Model
Error Code E51

rameez (Tuesday, 17 March 2020 10:06)

ep20nt model
error code E51

ahmed (Wednesday, 11 March 2020 12:47)

jcb manuals catalog

Ibnu (Tuesday, 10 March 2020 15:31)

CAT electric forklift NRS18CA
Error code B13 & D30

Terry (Tuesday, 03 March 2020 17:50)

what dose FTV duty cycle at (lean) limit mean and how to fix

Viktor (Tuesday, 03 March 2020 08:41)

TCM FB15-8
TCM FB10-7
Need service manual if possible.

Jonathan (Thursday, 20 February 2020 22:05)

Komatsu FB20-3 1991. Need service manual if possible. jmhgill@hotmail.com

Carlos Gayardo (Monday, 10 February 2020 01:12)

Hola Cuauhtémoc Sandoval, mándame un email a annyflow1977@gmail.com

HOLA, BUENAS TARDES, REQUIERO LISTA DE CODIGOS DE ERROR, SOFTWARE. MANUALES Y DIAGRAMAS PARA UN joungheinrich ETR 320, ME LOS PODRIAN COTIZAR? QUEDO EN ESPERA DE SU AMABLE RESPUESTA, POR FAVOR

majid (Friday, 31 January 2020 11:38)

Hi I want a workshop manual for 2001,linde forklif H45D-04 .
Thank you

Дмитрий (Friday, 24 January 2020 15:07)

hello I have a caterpillar ep16n error 47 can help

Trần Văn Đông (Monday, 20 January 2020 04:10)

Forklift manual, error code Of FRHB15-8

benok teshome (Friday, 10 January 2020 16:32)

lonking electric forklift » pump 47″ error

Md faiyaz khan (Friday, 27 December 2019 16:56)

Eroor cord 244 folt

Patrick (Thursday, 19 December 2019 13:41)

Hello, on electric hystrer fork lift there is a symbol of spanner flashing , It can’t do anything any help please? «nsengapack@gmail. com»

Allex (Monday, 16 December 2019 14:57)

Hyster 30: what is code 65527

John Blase (Thursday, 12 December 2019 00:56)

Hello,
I am desperately searching for a repair/parts manual for a Komatsu Arion plus 15
Model -FB15EX11
Serial# 813370

JEAN CLAUDE VIRASAMY (Tuesday, 03 December 2019 16:17)

HELLO I NEED TO BUY A SERVICE REPAIR MANUAL FOR STILL ELECTRIC FORKLIFT EFG 1.5/6001 YEAR 1989, COULD YOU FIND THIS FOR ME PLEASE, THANKS.

Jason (Monday, 25 November 2019 08:05)

i need the manual for a 1944 clark Carloader forklift

yonny farfan (Thursday, 21 November 2019 16:04)

buen dia, amigos tengo una falla de un montacargas hyster el cual me arroja el codigo d007, agradecería si me pueden aportar ayuda porque no dispongo de los codigos de averias.

German (Saturday, 16 November 2019 09:47)

Hallo , i have a still R70-16 diesel 2002 ,

i get the error code operational brake 71

can anyone tell me what it is ? thank you

German (Saturday, 16 November 2019 09:44)

Hallo , i have a still R70-16 diesel 2002 ,

i get the error code operational brake 71

can anyone tell me what it is ? thank you

Rocky Mumba (Friday, 15 November 2019 14:18)

Cat folklift showing error code p07.
What do I do please help me.

Roger (Tuesday, 12 November 2019 17:20)

I got a f16 code and it will not move fwd or reverse and you can here the backup alarm come on when you put it in reverse. What do I need to check

Clarke Carruthers (Wednesday, 06 November 2019 11:07)

Kingsley Chima (Saturday, 26 October 2019 12:48)

Error code -999 of linde forklift model number e16-01. Serial number h2x386d06664

FITSUM AMARE (Friday, 25 October 2019 13:37)

pallet stacker • Model number: ES410 ACDV29
• Serial number : 527527
not moving forward & revers
would you support

FITSUM AMARE (Friday, 25 October 2019 13:35)

please would you send me repair manual for manitou electric pallet stacker • Model number: ES410 ACDV29
• Serial number : 527527

Russell (Friday, 25 October 2019 02:41)

Hey i use one of yalls walkers at work and was trying to find out what «E250 means. Ghost69420@gmail.com

DeMarco (Sunday, 20 October 2019 13:00)

Jungheinrich error 070

Robert (Friday, 18 October 2019 23:48)

. have a 1980 Manitou forklift. Transmission about dead. Where to find rebuild parts and service manual? on tag: 688 DT 688013 4008-4099-4026-4051 40052 16201 23601 power . C642608 Any help where to find rebuild parts and adjustment, service manuals especially for the transmission would be greatly appreciated. This machine looks identical to T 602 CT at an auction.
millpark99@yahoo.com

Randy (Wednesday, 16 October 2019 00:54)

I have a crown 3000 series pallets jack flashing a f300 code and it won’t charge. Any suggestions

Randy (Wednesday, 16 October 2019)

I have a crown 3000 series flashing 2002 and it won’t charge. What could be the problem

Pelaille Cadet (Saturday, 12 October 2019 17:30)

I am looking for service parts manual for this Dalian Forklift. Here are the model and serial :

Model # : CPCD70
Serial#: D070170010

I am looking for a Hard copy and a soft copy of that manual. Could you please help me on this matter?

rhendy saleh (Tuesday, 08 October 2019 22:13)

forklift caterpilar50 eror di f92 apakah artinya

Jermaine Anderson (Sunday, 06 October 2019 04:07)

Hi, I have a Raymond reach Truck model: 750- r45tt I was wondering if anyone as a service manual can send me please or tell me what is code 61 please
Staindem40@gmail.com

Wayne Oliver (Tuesday, 24 September 2019 16:56)

Hi,
I have an error code EE on a Daewoo B15T. Can you help.
Thanks
wayne.oliver@futurform.co.uk

Helge (Saturday, 21 September 2019 10:15)

I have BT LWE 180
error code: A. and 6.
What to do?
htunheim@online.no

JAY (Saturday, 21 September 2019 02:46)

I have NYK FBR15-63 forklift
Suddenly it showed error message
Could you send me a manual book about this lift.
pmkloveyou@gmail.com

Huy (Friday, 13 September 2019 10:32)

What means error E211 for TCM FB20-8?
taquochuy@onamba.com.vn

Alex (Wednesday, 11 September 2019 11:27)

Hello, I need error code F30 for HELI CPD15 forklift
richstockby@gmail.com

nabeel (Thursday, 05 September 2019 09:57)

what means error x6501 in still forklift.

deepak.kumar (Monday, 02 September 2019 10:28)

Hello i need error code for HYSTER H9.0 FT Forklift
deepak.kumar@ali-sons.com

Andree Charette (Wednesday, 28 August 2019 15:30)

Good morning,
Is it possible please to have a operator’s manual for the TCM FHG30TTL by PDF sent to my email please @ andree.daoustchare@scotts.com

Shankar (Saturday, 24 August 2019)

Jungheinrich 0802 error code

I have Jungheinrich ETV 114
It shows some info codes
Info 32 ,7 . etc
So who can send me info code description, thank you
Email- pachaminda@gmail.com

Savi (Friday, 23 August 2019 13:18)

Hello,
I have a problem with pallet truck OMG 320 KN-P AC, error code 7805 on display, hydraulic is OK, defective travel. Can anyone help me? Send to: sl.michalko@gmail.com. Thanks.

Patryk (Monday, 19 August 2019)

Hello,
I need full list of error codes for Still EK 12 from 2003. Please could you help me? Email: phupatrex@gmail.com

Will (Wednesday, 07 August 2019 18:02)

I got error code F003 and it’s not charging. What do I do?

Lyle Ashley (Monday, 29 July 2019 21:59)

While trying to charge our rtw35 I’m getting a shutdown red flashing light with lo u flashing I’m the display, what’s the problem?

Nikola (Monday, 29 July 2019 19:38)

Hello
On EJE 116 pallet track I have event message E4371.
Please can you help me to fix this problem
nikolaeter@gmail.com

s.sivakumar (Wednesday, 24 July 2019 18:57)

our company have FB15RJ-12 model .They have E-09 ERROR.Traction and hydraulic not working. plz give me answer to my mail id sivakarthika1980@gmail.com

Kyle robinson (Monday, 22 July 2019 14:37)

Hi there could u tell me what this code is indicating on my hyster model S60 FT??

sagrario (Wednesday, 17 July 2019 21:25)

buen diA REQUIERO MANUAL PARA CHECAR TIPOS DE BATRIAS PARA HYSTER W40XTC a sagra23@gmail.com

Alisson Bonnet (Wednesday, 17 July 2019 16:19)

I would like the manual of faults CPD25AC4I, please, my e-mail is rental.processos01@macromaq.com.br

Alisson Bonnet (Wednesday, 17 July 2019 16:16)

error in cod 5.8 and 6.6, i help

Mandy Bell (Monday, 15 July 2019 16:41)

Hi Michael Ward, if no one answers, I’d get in touch with the Health and Safety Executive (HSE) asap, any accidents, log them with dates, times, error codes etc. they will investigate

simas s (Monday, 15 July 2019 11:21)

I need a service manual tcm electric forklift FRB 18-8
Could you please send me a copy if possible?

Please email: simas_milala@yahoo.com

We have still fm-x20n electric reach trucks.The emergency brake comes on by itself. same 4 fault codes keep coming up on screen fe 0300,fe 0302,fe 4270 and fe 4474.Does anybody know what these codes are.thank you

Simone (Friday, 05 July 2019 06:27)

I need a Operating Manual for the F/LIFT YRD SOLIDTYRE — H7.00XL 1988
Model F6A2873J
Could you please send me a copy if possible?

Please email: simonegray@laiswitchboards.com.au

Diego (Wednesday, 03 July 2019 21:21)

Error 776
The longshoreman stops and has to be turned off so he can use it again.

Larry (Wednesday, 03 July 2019 17:01)

Hi, I have a FBRS16B-AZ1 48vdc elect. reach truck steering stopped working. What can it be.

Stafford Oyama (Thursday, 20 June 2019 02:49)

Need operators manual for UT-26 propane forklift

Send to: stafford.oyama@gmail.com

Добрый день. Имеется каталог запасных частей на UN FD25T-F

Carlos Gomez (Friday, 14 June 2019 22:00)

I need the manual service TCM electric FB30-7 serial 81U000683 año 2005. If you have please send mail carlosgomezballadares@hotmail.com

James (Friday, 07 June 2019 07:47)

I lost a key of my forklift. Any chances to get new key from your service.
Baoli Model QD18

Amal (Wednesday, 05 June 2019 09:15)

61-FBR15SDE I Need to Download user manual, there is CO3 error what is this?

GERALD (Monday, 03 June 2019 12:45)

Hi, am having error code F16 on cat DP30NT.Kindly give any solutions.

Roger (Wednesday, 08 May 2019 17:55)

How can I fix a f89 code

I have forklift stiil Rx 60/50
There is have problem about error code 1401(control unit)
How to make solve and solution.thank you

Shawn (Friday, 12 April 2019 01:58)

Hi how do I change the time on my bt rrm16 high reach. Thanks

Corestore (Wednesday, 03 April 2019 07:34)

Joni (Wednesday, 20 February 2019 10:02)

Hello there,
We have a Jungheinrich efg 430 and we would like to have the full list of error codes of it.
Our machine is presenting an error 030 and since yesterday we cannot tilt the tower or make any horizontal move with it.
Can you help us with this problem?

Thanks in advance, Jóni

Sam (Thursday, 31 January 2019 12:30)

Источник

NOBLELIFT Forklift FE3D series Truck Error Codes DTC