Ошибка 1005f mac os

Category:

• Лытдыбр
• Cancel

Ошибка при попытке переустановки системы

Привет.

Стал обладателем MBP retina 2013. Это мой первый мак и соответственно все для меня в новинку. Мак пришел с чистой системой ( насколько я понимаю ), но было решено переустановить ёе самому. Чтобы точно быть уверенным в ее переустановке и чтобы получить соответствующий опыт. Загуглив как это делается, был приятно удивлен, нужно всего-то зажать command + R при перезагрузке и выполнить ряд простых действия. Что я и сделал.
Но ничего не получилось. Сразу появляется ошибка 1005F. О проблеме мало информации и обсуждений, основные рекомендации — поменять тип шифрования Wifi на роутере или подключить кабель. Разъема в ретине нет, так что подключать нечего, шифрование менял вплоть до полного отключения. Ничего не помогло.

Что же делать? Есть шанс переустановиться по Wifi или только загрузочную флешку использовать?

PS Кстати, если зажать alt при загрузке, то в выборе wifi пусто. Так и должно быть?

Question: Q: -1005F error when in recovery mode

In the process of cleaning the mac to use it as a new device it got stuck at downloading the latest OS (after successfully erasing the disk in utilities). Internet posts indicated that sometimes the time gets erased too and needs to be set via terminal again. However i never came to that as it would start showing an allert sign with «apple.com/support» and underneath -1005F. Also in between at one restart it showed the folder logo with a question mark in it instead of the apple logo. When command+R ing it went i to internet recovery mode and let me choose a wifi. However when chooing a wifi it just stays like that, the globe logo is spinning but nothing else is happening. Also occasionally the wifi bars drop to zero even though on my phone and other laptop right next to it its full bars.

Its a brand new macbook pro (the touchbar one) and after the mail app wouldnt work after putting on the backup from the old macbook we decided to clean it again and set up as new machine and migrate documents and stuff by hand. Oh look, neverending story, back to the top

Источник

Ошибка при попытке переустановки системы

Стал обладателем MBP retina 2013. Это мой первый мак и соответственно все для меня в новинку. Мак пришел с чистой системой ( насколько я понимаю ), но было решено переустановить ёе самому. Чтобы точно быть уверенным в ее переустановке и чтобы получить соответствующий опыт. Загуглив как это делается, был приятно удивлен, нужно всего-то зажать command + R при перезагрузке и выполнить ряд простых действия. Что я и сделал.
Но ничего не получилось. Сразу появляется ошибка 1005F. О проблеме мало информации и обсуждений, основные рекомендации — поменять тип шифрования Wifi на роутере или подключить кабель. Разъема в ретине нет, так что подключать нечего, шифрование менял вплоть до полного отключения. Ничего не помогло.

Что же делать? Есть шанс переустановиться по Wifi или только загрузочную флешку использовать?

PS Кстати, если зажать alt при загрузке, то в выборе wifi пусто. Так и должно быть?

Источник

Question: Q: applesupport error — 1005f.

My MacBook air is not loading.

When i starting Internet recovery mode with the cmd +R. Internet recovery tries to start but then an error saying applesupport error — 1005f.

Any ideas anyone? There is an internet connected WiFi as well as LAN, but i don’t know how to check WiFi and LAN is connected.

Posted on Mar 19, 2019 4:30 AM

All replies

Loading page content

Page content loaded

Thanks for the post in Apple Support Communities. I understand you’re running into an issue with your MacBook Air, and I’m glad to see how I can help.

First, to clarify, what’s happening when you say your MacBook Air isn’t loading? What happens when you try starting up? Knowing this would help determine if there are other steps you can try before booting into macOS Recovery, and might also shed some light on the error message.

Also, have you tried starting up using either Command + Option + R, or Shift + Option + Command + R? These are different methods of accessing the macOS Recovery system, and it’s worth testing to see if you get similar results with each: How to reinstall macOS from macOS Recovery

If you find the issue persists, you might try running the Apple Diagnostics to test this: How to use Apple Diagnostics on your Mac

Источник

Question: Q: Internet recovery is broken

Something weird is happening to internet recovery on a Mac, whenever it trys to load up (even though an Ethernet cable is connected) it will ask to select WiFi, select WiFi login and it comes up with an error it says:

Error -1005F

Looked everywhere for Error -1005F, no such error exists, Mac is completely crippled at this point because there are no installation discs or anything and Internet recovery is toast.

iMac (27-inch Mid 2011), OS X Mountain Lion (10.8.2)

Posted on Oct 1, 2012 10:20 AM

Helpful answers

This is what I have discovered, which I’m pretty sure is correct:

• Error -2003F means that Internet Recovery has been interrupted and needs to be restarted.
• Error -1005F means that the Internet connection you are using for Internet Recovery is not suitable. I tested three and the two WPA2 wireless networks worked fine but the WiFI transmitted by my phone did not work.
• Error -3001F means the signal strength is not enough. Internet Recovery obviously uses a different wireless driver from OSX because it needs to be much closer to the access point that normally.

There’s more to the conversation

Loading page content

Page content loaded

No one know what this error is, I can’t find anything on the error :s

I’ve seen here that some routers interfere with the connection to the Apple restore servers. Can you connect the Mac directly to the modem?

That would actually explain it, recently put in a new Router, will try soon (other people using internet right now) and let you know.

By any chance the issue is with the Cisco EA4500 Router?

I don’t know specific types, but have seen other posts where the fix was to bypass the router. However, it may be that the problem was with the type of WiFi protection used.

From the Article, About OS X Recovery, you must be using WPA or WPA2 on your WiFi for Internet Recovery.

This is what I have discovered, which I’m pretty sure is correct:

• Error -2003F means that Internet Recovery has been interrupted and needs to be restarted.
• Error -1005F means that the Internet connection you are using for Internet Recovery is not suitable. I tested three and the two WPA2 wireless networks worked fine but the WiFI transmitted by my phone did not work.
• Error -3001F means the signal strength is not enough. Internet Recovery obviously uses a different wireless driver from OSX because it needs to be much closer to the access point that normally.

So I figured out the dreaded 1005f code. What I had to do:

step 1: find another mac and download a bootable drive of Maverick.

step 2: Go onto Apps and download Maverick for FREE and place the downloaded Mavericks in your Applications.

step 3: Have an external Hard drive to write the bootable disk on.

step 4: go into applications, then click utilities, and then click disk utility.

step 5: click on your external hard drive ( you are going to use to copy on) hit erase and make sure the format is Mac OS Extended (journaled). Click out after it is done.

step 4:Now you can google how to make a bootable maverick disk and get three different ways but I tried the other ways and it didnt work so. I used disk a 3rd party site to make the bootable disk.

step 5: Download from website above (it is FREE).

step 6: Once downloaded click the program and follow the directions because it basically does everything for you.

step 7: Once it is done making a bootable disk take that lovely disk to your laptop.

step 8: start laptop and press options (alt) key down and once you see the apple let go.

step 9: the bootable disk will be shown on screen (OS X Install Disk) click it and it will bring you into loading Mavericks.

step 10: Do not hit the start button on Mavericks download screen instead look on the top of your screen in the tool bar and go to Utilities pull down bar and click Disk Utility.

step 11: Once in Disk utility (if your hard drive is not fried it should show all available drives) the first drive is your main drive so click on it. Try and hit First Aid tab and see if you can fix it that way. if not go to next step.

step 12: Click partition, this will enable you to by pass your troubled hard drive while being able to make a copy of Mavericks to log onto so you can fix the mess.

step 13: Once in partition you will notice you have another drive which is the drive you DO NOT want to partition over!! So here is what you do notice to the left it says «size» this is telling you how much space is on this drive, make sure you have enough space to move to the second partition.

step 14: Here is a link that has pictures and all that good stuff just skip the first parts until you reach the part where the link has a screen like yours then follow along.

NOTE: remember to NOT override your drive with the partition!!

step 15: Once you made a partition now you can download a fresh copy of Mavericks on it (this is to be able to get on your mac on a function OS).

step 16: Restart computer and hit option on start and download the Mavericks on the new partition you made. This will make you create a whole new username etc. don’t worry your hard drive that has all your stuff is still there in the background.

step 17: You need to get a hold of a disk repair cd (Norton or whatever brand) I used Disk Warrior and it did cost a pretty penny $100 BUT it saved my expensive laptop! So once you get a copy of the CD or download and make a bootable drive run it.

NOTE: Depending on the disk repair I used Disk Warrior so I will give information on the steps I did.

step 18: Place the disk repair drive in your applications then utilities folder. Once there click on it and then click on disk utility.

step 19: Run the disk repair should recognize your drive. Once it recognizes it click on your drive and hit repair. This will the repair. once it is done then restart computer and hold down option (alt) key again and you will notice that you have a couple of drives and Disk Warrior to choose from. Click on your drive and this should fix the problem! Please note this may NOT work for you if your drive is fried. Oh and also dont forget to back up your original drive with time machine so this will not happen again. also, if you want to unpartition your hard drive google «how to unpartition» and directions will pop up!

Источник

Looks like no one’s replied in a while. To start the conversation again, simply

ask a new question.

-1005F error when in recovery mode

I needed to reinstall macOS, so I deleted my partition and opened the Mac recovery and started downloading Sierra. Unbelievable 6 hours later, the installation was stuck and I turned my MacBook off.

Pressing the power button + Commandcommand R gives me this message:

I tried everything, changing my WiFi authentication type from WEP to WPA/WPA2, all boot shortcuts, resetting SMC/NVRAM.

Pressing power + CommandOption shows me the following:

Clicking the «…» button lets me manually input the WiFi SSID and password, but it hangs forever in the loading indicator.

I don’t have another Mac to make a bootable USB stick and reinstall the OS, only Windows.

I needed to reinstall macOS, so I deleted my partition and opened the Mac recovery and started downloading Sierra. Unbelievable 6 hours later, the installation was stuck and I turned my MacBook off.

Pressing the power button + Commandcommand R gives me this message:

I tried everything, changing my WiFi authentication type from WEP to WPA/WPA2, all boot shortcuts, resetting SMC/NVRAM.

Pressing power + CommandOption shows me the following:

Clicking the «…» button lets me manually input the WiFi SSID and password, but it hangs forever in the loading indicator.

I don’t have another Mac to make a bootable USB stick and reinstall the OS, only Windows.