Ошибка 1646 mototrbo - Не ошибается лишь тот, кто ничего не делает!

To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM’s we will still enforce the forum rules. Your PM’s are not private and the administration has the right to read them if there’s a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don’t be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Thread starter

radioman2001
Start date

Oct 1, 2010

Status: Not open for further replies.

As listed in the title yesterday when I started up my MOTOTRBO program I get this error. Up to that time the software ran fine. Does anyone have a listings of the errors in this CPS? I can’t look in the software for error codes since it won’t run. I don’t mind trying to repair my own problem I just would like to know where to start. Is it the software or a configuration problem in my computer.

did you do a windows update recently? i’ve had them crash various CPS before. try uninstalling and reinstalling the CPS, it does not wipe out your saved archives.

I found it, this is a corporate computer, so who knows what they do after hours. I was doing some cleaning and deleted a folder that had very little activity. Apparently MOTOTRBO uses Macrovision’s licensing system to validate their software upon start up. I found the problem listed in the event viewer for errors. To correct it I copied the folder from another computer, but disabled the actual EXE file. Works ok now.

radioman2001 — I have the same problem but don’t fully understand how you solved it, are you able to explain in more detail please.

Error 1646

How did you fix this?? Bc I’m haveing the same problem

it appears no one actually knows what error 1646 is, as no one has solved this.
cut and pasting from another folder of a working version is luck.

win7 64-bit.
I need to install this version, and that’s ok.

People have installed it before and made it work, and doubtless this came up when 12 was new.

[-] Error
1646, commonlicenseinterface, Could not load file or assembly ‘CLRCommonClientLicensingManager.dll’ or one of its dependencies. The specified module could not be found.,
at commonLicensing……..

Activation context generation failed for «C:windowsWinSxSx86_microsoft.vc80.mfc_1fc8b3b9 a1e18e3b_8.0.50727.6195_none_cbf5e994470a1a8fMFC8 0.DLL». Dependent Assembly Microsoft.VC80.MFCLOC,processorArchitecture=»x86″.

I found it, this is a corporate computer, so who knows what they do after hours. I was doing some cleaning and deleted a folder that had very little activity. Apparently MOTOTRBO uses Macrovision’s licensing system to validate their software upon start up. I found the problem listed in the event viewer for errors. To correct it I copied the folder from another computer, but disabled the actual EXE file. Works ok now.

Sorry, I realize this was 2010 you wrote this, but which EXE are you refering to ?

Yea I’m lost on what to do and I’m using windows 10

Status: Not open for further replies.

Источник

Moderator: Queue Moderator

RADIOMAN2002: Posts: 1102; Joined: Thu Apr 04, 2002 4:00 pm; What radios do you own?: More than I can count

error 1646 in MOTOTRBO

I havn’t had the need to program any MOTOTRBO for a while, but this morning I get this error «#1646 Application has encountered an error» I checked in windows component services. Error listed as «1646sfcadapter. External component has throw an exception». Further info from windows is that it has something to do with netframe. I downloaded the latest version (4.0)and installed it, but still the same error comes up.Any ideas?

escomm: Queue Moderator; Posts: 5170; Joined: Fri Mar 24, 2006 8:24 pm

Re: error 1646 in MOTOTRBO

Post

by escomm » Thu Dec 16, 2010 8:46 am

dot net is a frickin PITA

loaded CPS on my old programming laptop and it took 70 minutes for the install to complete. then another 15 minutes for the C++ libraries.

Return to “Radio Programming”

Jump to

Administrative
↳ Announcements and Forum News
↳ Forum Rules
General
↳ General Motorola Solutions & Legacy Radio Discussion
↳ Radio Programming
↳ Software & Firmware Releases & Issues
↳ Codeplug Information
↳ NFPA 1802 Discussion
Current Motorola Solutions Public Safety / Astro Product Line
↳ APX NEXT
↳ APX Series Subscribers
↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
↳ ASTRO Experimental — How to do things a little out of the box
↳ ASTRO Products Feature Requests & Future Speculation
↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
Current Motorola Solutions Professional / Business Product Lines
↳ MotoTRBO ION Devices
↳ Motorola CP/CM Series Subscribers
↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
↳ MotoTRBO 3rd Party Application Discussion & Support
↳ MotoTRBO/Business Products Feature Requests & Future Speculation
↳ Experimental — How to do things a little out of the box
Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
↳ Base Stations, Repeaters, General Infrastructure
↳ Consoles
↳ Experimental — Mods, and how to do things a little out of the box
↳ Infrastructure Product Feature Requests & Future Speculation
Focused Discussion
↳ Motorola Digital and Voice Paging
↳ Converting Motorola Equipment to 900MHz Amateur
↳ Test Equipment & RF Equipment Alignment
↳ Vehicle Radio Installs
↳ Experimental and Next Generation LMR
↳ Motorola Digital Radio Compatability
Off-Topic Discussion
↳ Vehicle Warning Equipment Discussion
↳ Computer/Technical Assistance
↳ Knowledge Base

Источник

1646
This is often caused by a lack of permissions to create the below folders. The fix in this case, is to install and run the CPS as an Administrator.

There could also be an issue with Windows (specifically the WMI Service). Make sure Windows is updated (all patches are applied and no restart is needed). Makre sure you have your codeplugs (if any) saved somewhere else, uninstall the CPS then reboot. Once rebooted go through and delete the following:

C:Program Files (x86)MotorolaMOTOTRBO CPS
C:ProgramDataMotorolaMOTOTRBO CPS
C:Userscwh050AppDataRoamingMotorolamototrbocps.tbl

Use a registry cleaner to delete any unused entries then reinstall the (latest) CPS. If this doesnt do the trick, see my support page to get help.

Источник

UPDATE (28.05.19)

The below is only applicable to CPS 16.0 and earlier. CPS2 has different error codes that are in form of 100XXXX where XXXX is the below number. Most have the same meaning but there are some differences. For example, with CPS2, error 1001687 means no acknowledge from device (i.e. cable not connected or radios is turned off).

For the majority of us technicians, programming MOTOTRBO radios will go smoothly and without error. In some cases, you might encounter an error, either when installing or starting the CPS or — more often — when trying to read a radio/repeater.

Despite what most think, there is no secret «error codes and what they mean list» hidden in the vaults at Motorola. The error codes don’t actually say what specifically is causing the error, they only point to several possible causes.

Back in the day, when I used to do post-sales technical support, we actually had to do some investigative work to determine the cause in some cases. We did however (and I’m sure my technical support colleagues still do) see the same error codes come up more than once and know what to look for. So here’s a short list.

This is by no means a comprehensive list so if you’ve seen one that I’ve missed, let me know via the comments.

1246

You’re trying to write a codeplug that has a feature flag and the device you’re writing to doesn’t. For example, you’re trying to write a codeplug with a Capacity Plus channel into a repeater with no Capacity Plus licence in it.

1646

This is often caused by a lack of permissions to create the below folders. The fix in this case, is to install and run the CPS as an Administrator.

There could also be an issue with Windows (specifically the WMI Service). Make sure Windows is updated (all patches are applied and no restart is needed). Makre sure you have your codeplugs (if any) saved somewhere else, uninstall the CPS then reboot. Once rebooted go through and delete the following:

C:Program Files (x86)MotorolaMOTOTRBO CPS
C:ProgramDataMotorolaMOTOTRBO CPS
C:Userscwh050AppDataRoamingMotorolamototrbocps.tbl

Use a registry cleaner to delete any unused entries then reinstall the (latest) CPS. If this doesnt do the trick, see my support page to get help.

1687

This is the most common error code. I’ve covered this before, so have a look here.

595

This is another common one usually caused by an IP address confict, so have a look here.

1057

This means you’ve either got CPS or purchased a radio from another region. For example, the CPS from EMEA (my region) won’t work with an XPR7550e. You either need to go back to the person who sold you the radio or CPS.
If, for example, you are in North America and you have a DP4801e. You will encounter two problems: the DP4801e is not FCC approved, so you could be breaking the law, and none of the local Motorola dealers will want to help you since you’ll be seen as a grey market importer.

1060

During the last upgrade, something went awry. The fix is to perform a device recovery. Connect the radio/repeater, from the Device menu in the CPS, click Device Recovery and wait for the process to complete. You will however loose whatever configuration was in there before so be prepared.

1027

That one is easy: you need the latest CPS.

4832

This error code is seen when installing the CPS. The root cause is simple: the user doesn’t have full permissions to the required folders on the PC. One fix would be to run the installer as an Administrator or to go back and give that user full permissions to the installation drive.

Error codes when registering an EID

There are generally two causes:

That EID/feature is assigned to another serial number or there are no more features left on that EID.
There is a problem with the connection between your PC and internet. Try pinging licencing.motorolasolutions.com to see if the connection is good.

Note that you only need an internet connection when registering a feature. You can disconnect when activating it in the device.

Anything else.

For anything else, make sure Windows has all the updates; you have the latest CPS and the PC is working correctly. Also, sometimes Antivirus applications can interferere so try disabling them as part of your checks to find the root cause — this includes Windows Firewall. If you still need help, see my support page. If you need the latest CPS, see my FAQ page.

Источник

Войти или зарегистрироваться

Подписывайтесь на телеграм канал журнала RADIOCHIEF.RU

Скрыть объявление

Motorola ПО

Тема в разделе «Общие вопросы», создана пользователем Dexter, 4.05.17.

Метки:

sl1600

Оффлайн

Dexter
Новичок

Регистрация:

1.03.16

Сообщения:

34

Адрес:

Москва

Доброго времени суток.
Помогите найти программу прошить Motorola SL1600.
То что нашел это MOTOTRBO CPS (с 12 по 14 версию) не могу запустить выдает ошибку 1646.

Dexter,
4.05.17

#1
Оффлайн

RU9TR
Специалист

Регистрация:

28.09.16

Сообщения:

1.957

Адрес:

г.Оренбург

Что на Мотороле написано? Версия?

RU9TR,
4.05.17

#2
Оффлайн

Dexter
Новичок

Регистрация:

1.03.16

Сообщения:

34

Адрес:

Москва

Под батарейку завтра залезу.

— Добавлено новое сообщение, 5.05.17, Сообщение создано: 4.05.17 —

VER: R01.01.10.0002
Model: MDH88QCP9JA2AN

Dexter,
5.05.17

#3
Оффлайн

RU9TR
Специалист

Регистрация:

28.09.16

Сообщения:

1.957

Адрес:

г.Оренбург

— вот по ней и ищите ПО.

RU9TR,
5.05.17

#4
Оффлайн

Dexter
Новичок

Регистрация:

1.03.16

Сообщения:

34

Адрес:

Москва

Афигенно помог!!!

Dexter,
5.05.17

#5
Оффлайн

RU9TR
Специалист

Регистрация:

28.09.16

Сообщения:

1.957

Адрес:

г.Оренбург

Ну чем смог… А то я смотрю вы пытаетесь прошить совсем другим софтом…

RU9TR,
6.05.17

#6
Оффлайн

Alexuz
Бывалый

Регистрация:

26.01.16

Сообщения:

337

Адрес:

МО, Чехов.
Имеется вот такое лицензионное ПО. Могу поделиться, но как…? Оно весит 1,7Гб.
Вложения:
- 2017-05-06 13.00.38.jpg
  
  Размер файла:
  
  158,7 КБ
  
  Просмотров:
  
  30
Alexuz,
6.05.17

#7
Оффлайн

Леший
Специалист

Регистрация:

8.01.16

Сообщения:

2.942

Адрес:

Серпухов-Протвино

выложи в облако на мейл яндекс или гугл

Леший,
6.05.17

#8
Оффлайн

Dexter
Новичок

Регистрация:

1.03.16

Сообщения:

34

Адрес:

Москва

Есть 14 версия, кому надо пишите в личку.

Dexter,
19.05.17

#9
Оффлайн

Ka2
Читатель

Регистрация:

5.02.21

Сообщения:

1

Адрес:

Грозный

Можете мне на почту скинуть waynah95@inbox.ru заранее спасибо

Ka2,
5.02.21

#10

(Вы должны войти или зарегистрироваться, чтобы ответить.)

Показать игнорируемое содержимое

Похожие темы

Разбираем Motorola DM3401

Chief,
29.02.16, в разделе: LPD / PMR (433/446 МГц)

Ответов:

20

Просмотров:

7.401

Alexuz

21.10.17
Радиостанция Motorola GM350

Konstantin_a,
19.02.17, в разделе: Общие вопросы

Ответов:

13

Просмотров:

7.394

Konstantin_a

21.02.17
Motorola TLKR-T6 . Модуляция.

Serg172,
19.10.17, в разделе: Ремонт и доработки оборудования связи

Ответов:

7

Просмотров:

3.061

RU9TR

21.10.17
Motorola DP4400

Мышаня,
3.03.18, в разделе: Беседка

Ответов:

4

Просмотров:

1.682

Мышаня

17.03.18
Motorola GM360 LowBand 29(27)МГц

Шериф,
4.02.19, в разделе: Си-Би (27 МГц)

Ответов:

15

Просмотров:

4.229

антиквар48

26.12.21

Загрузка…

Facebook
Twitter
Вконтакте
Одноклассники
Google+
Pinterest

Войти через Facebook

Войти через Twitter

Войти через Google

Войти через VK

Ваше имя или e-mail:

У Вас уже есть учётная запись?

Нет, зарегистрироваться сейчас.
Да, мой пароль:
Забыли пароль?

: Запомнить меня

Форум
Форум

Быстрые ссылки
- Поиск сообщений
- Последние сообщения
Ресурсы
Ресурсы

Быстрые ссылки
- Поиск ресурсов
- Наиболее активные авторы
- Последние оценки
Пользователи
Пользователи

Быстрые ссылки
- Выдающиеся пользователи
- Зарегистрированные пользователи
- Сейчас на форуме
- Недавняя активность
- Модераторы
- Новые сообщения профиля
Журнал
YouTube
Дзен
Магазин
Telegram
ПРАВИЛА ФОРУМА
Меню

Поиск

Искать только в заголовках

Сообщения пользователя:: Имена участников (разделяйте запятой).

Новее чем:

Искать только в этой теме
Искать только в этом разделе
- Отображать результаты в виде тем

Быстрый поиск

Последние сообщения

Больше…

Источник

error 1646 in MOTOTRBO

Re: error 1646 in MOTOTRBO

UPDATE (28.05.19)

1246

1646

1687

595

1057

1060

1027

4832

Error codes when registering an EID

Anything else.

Войти или зарегистрироваться

Motorola ПО

Dexter Новичок

RU9TR Специалист

RU9TR Специалист

RU9TR Специалист

Alexuz Бывалый

Вложения:

2017-05-06 13.00.38.jpg

Леший Специалист

Dexter Новичок

Ka2 Читатель

Разбираем Motorola DM3401

Радиостанция Motorola GM350

Motorola TLKR-T6 . Модуляция.

Motorola DP4400

Motorola GM360 LowBand 29(27)МГц

Быстрый поиск

Related searches

mototrbo cps error 1646

MOTOTRBO CPS

CPS DM-1701

Business Radio CPS

CLP Series CPS

MOTOTRBO Flashzap Driver 1.5

MOTOTRBO Tuner

CPS MD-UV380

mototrbo cps error 1646

mototrbo cps error 1646

CCleaner 6.12.10490

MOTOTRBO CPS

Internet Download Manager 6.41.14.3

Driver Booster 10.4.0.127

Riot Vanguard 1.12.0.177

MOTOTRBO Flashzap Driver 1.5

Recuva 1.53.2083

mototrbo cps error 1646

MOTOTRBO CPS

Business Radio CPS

CPS DM-1701

MOTOTRBO Flashzap Driver 1.5

Dexter
Новичок

RU9TR
Специалист

RU9TR
Специалист

RU9TR
Специалист

Alexuz
Бывалый

Леший
Специалист

Dexter
Новичок

Ka2
Читатель