-
При диагностике на X5 3.0 вылезла ошибка на коробке [54C6 Oil abrasion]
было у кого? коробку в морг или есть варианты? Ошибка не сбрасывается.
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
Главный Инженер
Старики-разбойники- Регистрация:
- 27 мар 2008
- Сообщения:
- 19,572
- Пол:
- Мужской
- Регион:
- Москва
Уровень и качество масла прверить для начала, затем поменятьего(масло).
-
а уровень и качество в раздатке или коробке?
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
- Регистрация:
- 8 июн 2016
- Сообщения:
- 74
- Пол:
- Мужской
- Регион:
- Казахстан
Эту ошибку через bmw scanner 1.4 как то можно скинуть?
если нет, то просьба написать как можно скинуть.
Спасибо! -
Устраняется выполнением функции «Замена масла» в ДИС или Рейнголд.
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
- Регистрация:
- 8 июн 2016
- Сообщения:
- 74
- Пол:
- Мужской
- Регион:
- Казахстан
Cпасибо!
Я правильно понимаю что инпа тоже не поможет? -
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
Тоже появилась такая ошибка, масло в АКПП и раздатке менял пару тысяч назад, нужно просто выполнить функцию «замена масла»? Я попробовал это сделать лаунчером — ошибка не ушла. Попробовать чем то другим типа ДИСом или Рейнголдом?
-
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
- Регистрация:
- 20 авг 2021
- Сообщения:
- 1
- Пол:
- Мужской
bmw 328xi oil wear 54C6. что означает? и ошибка 2A82 inlet Vanos. подскажите пожалуйста ребята если у вас было такая проблема
-
Oil wear износ масла. В АКПП или раздатке, лень искать за тебя твои ошибки.
Масло поменять надо, и обнулить компом.
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
Поделиться этой страницей
Правила форума
Ответить
1 сообщение
• Страница 1 из 1
Ошибка 54с6 oil wear?
rus888 » 19 июл 2012 09:22
Доброго всем дня, на бмв х5 тди подергивается акпп загнал на диагностику выдало ошибку 54с6 Oil wear в переводе износ масла, это что озночает замена масла? (спасибо)
- rus888
- Бываю здесь
- Сообщения: 27
- Зарегистрирован: 13 июл 2012 08:38
- Автомобиль: bmw x 5
-
- ICQ
Вернуться к началу
Ответить
1 сообщение
• Страница 1 из 1
Вернуться в BMW X5 (E53)
Перейти:
Кто сейчас на конференции
Сейчас этот форум просматривают: Google [Bot] и гости: 0
- Форум BMW X5
- Наша команда•Удалить cookies конференции
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group • Designed by BMW X5 Club © 2009-2010
Доброго всем времени суток!
В рамках продолжения большого ТО на иксе было заменено масло в двигателе и в раздаточной коробке.
За неделю до замены в мозгах появилась ошибка 0054C6 «Износ масла».
Ну она была по плану так что приступил к замене.
Времени и сил на это ушло не много.
Полный размер
Откручиваем сливную и заливную пробки
Полный размер
Полный размер
Далее ждём пока сольётся масло.
Масло слилось тёмное, но без примесей и запаха гари.
После этого закручиваем новую задвинуб пробку и заливаем масло через шприц в заливное отверстие, как только масло польётся через отверстие закручиваем новую заливную пробку.
Полный размер
Полный размер
После этого берём шнурок и делаем адаптацию раздатки.
Полный размер
Полный размер
Полный размер
Полный размер
Полный размер
Полный размер
На этом большое ТО ещё не законченое, так что продолжение следует…
Масло для раздаточной коробки 83 22 2 409 710
Пробка*2 33 11 7 525 064
Цена вопроса: 2 877 ₽
Коллеги, кто сталкивался с этой фашисткой тамагочи, Е70х у нас 1-2 всего, никто не работал с ними, ткните носом куда лезть чтоб анатомию этого буржуя всю неизучать, где стоит блок управления раздаткой? Приехал человек БЕЗ настроения, говорит иногда глючило ненадолго и восстанавливалось, вморозы посадил аккум, немог завести устраивал танци с ним, понятно нахватало всего и везде, всё поресетил кроме:
Ошиб. 1/1 ID:5F3A
5F3A
Блок управления раздат. коробкой
Fault 1/2 ID:54C6 Ошиб. 2/2 ID:539E
54C6 539E
Oil wear Ошибки, Передавать Блок
Fault 2/2 ID:539E Ошиб. 1/1 ID:5F39
539E 5F39
Malfunction, transfer box Блок управления раздат. коробкой: Внутр.
Fault 1/1 ID:5F39
5F39
Transfer case: internal
тут же при пуске появляются вновь. Потом он вспомнил что недавно обнаружил следы ЖИВНОСТИ грызлявой, говорит увидел ошмётки обивки в багажнике всё просмотрел по проводам и ничего перееденного не нашёл! Собираюсь покапаться на выходных с его авто, в автодате толком нет нихрена, нужна информация любая, в помощь. Возможно всё же добрались зубки куда то! А возможно трындец попадосовый владельцу!
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
54c6 oil abrasion
i’ve been getting my 4×4 light coming up in amber at random times, but then it goes away at the next re-start.
it came up today am on a short ride to drop mrs to the station, came back just now and hooked up the scanner. and here’s what i find:
i’ve searched for this fault code (ignore the CAN msg..), appears that the transfer box’s BMW ‘life-time’ oil needs replacing.
now the usual help:) does anyone know what oil to use (its not the standard ATF oil) and how to do it pls.
i will also start lookin around when i’m back in the ev.
worst case — the car is due for a service anyways in the next month, i could give it to my indy and ask him to do this job as well i guess.. but i’m lookn at a massive bill as the handbrake passed MOT with a warning last year which needs attending, plus front brakes need doing as well.. so if i can do anything myself i’d do it.
cheers
j
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic 
Previous: BMW X5 E53 Facelift 3.0d
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
Re: 54c6 oil abrasion
Post
by jaynana » Tue Aug 07, 2012 9:39 am
found some info on how to change here
does anybody know what are Adaptation values in the below statement pls?
>Adaptation values should be reseted after fluid change. As far as I understand you can only do it with coding tools.
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic
Previous: BMW X5 E53 Facelift 3.0d
-
stevox5
- Member
- Posts: 204
- Joined: Sat Jul 31, 2010 6:53 pm
- Location: South Wales
54c6 oil abrasion
Post
by stevox5 » Tue Aug 07, 2012 11:58 am
Very easy to change the oil but you will need the adaptions to be reset.
This can be down with the dealer tool GT1 or someone with Autologic. Will be ok to drive in the meantime though.
Where are you located … If near south Wales I could do it for you , if not a local dealer or independent should do it.
X5 3.0i Topaz Blue , Paddle shift steering wheel , Pioneer double din sat nav,Alpine speaker upgrade, Remap, HID’s,20inch lemans alloys,lemans arch kit,Depo light kit,carbon fiber interior wrap.
1989 BMW 325i SPORT E30 Fully equiped summer toy.
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
Re: 54c6 oil abrasion
Post
by jaynana » Tue Aug 07, 2012 2:42 pm
cheers steve, i’m in north-west london, so it will have to be the indy then..
j
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic
Previous: BMW X5 E53 Facelift 3.0d
-
X5Sport
- Global Moderator
- Posts: 18203
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6……
Re: 54c6 oil abrasion
Post
by X5Sport » Tue Aug 07, 2012 3:49 pm
And for anyone else with the same error code, this may help too:
Here is the relavent SIB:
=====================
SI B27 01 07
Intermediate and Special Transmission
April 2007
Technical Service
SUBJECT
Transfer case (VTG) Fault Code 54C6 Oil wear — Value too high
MODEL
E53 (X5) from 10/03 to 02/05 production
E83 (X3) to 02/05 production
SITUATION
After interrogating the fault memory, as part of an Inspection I or II maintenance service or another repair
requiring a diagnostics procedure, fault code 54C6 Oil wear – Value too high is stored. This fault will not
illuminate a warning lamp.
CAUSE
Transfer case fluid (non lifetime) wear value limit was exceeded.
CORRECTION
Replace the fluid in the transfer case.
PARTS INFORMATION
Part Number Description Quantity
83 22 0 397 244 TF0870 Fluid 1 = 1 liter
Note: Before opening, shake the container to evenly mix the additives in the fluid.
__________________
Never anthropomorphise computers. They hate that.
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
Re: 54c6 oil abrasion
Post
by jaynana » Tue Aug 07, 2012 9:59 pm
phew.. thanks for that. i was actually getting highly concerned whether it could be more complicated than just an oil change.
hopefully the oil change and the Adaptation values reset will happen tomorrow.
got so concerned that all other X projects were suspended with immoderate effect — like the webasto — until this got sorted!
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic
Previous: BMW X5 E53 Facelift 3.0d
-
X5Sport
- Global Moderator
- Posts: 18203
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6……
Re: 54c6 oil abrasion
Post
by X5Sport » Wed Aug 08, 2012 6:13 pm
The SIB is actually copied from (much) lower down the thread you found, but knowing how the older threads get archived I nabbed a copy a bit sharpish….and at least it’s an easy-ish fix.
Interested to read that not everyone has cleared the adaption values and not had an issue, but it’s definitely the right thing to do. Otherwise the systems will not have been told the fluid is now OK again.
At least you can get back to your other projects now too…. 
R
Never anthropomorphise computers. They hate that.
-
stevox5
- Member
- Posts: 204
- Joined: Sat Jul 31, 2010 6:53 pm
- Location: South Wales
54c6 oil abrasion
Post
by stevox5 » Wed Aug 08, 2012 8:26 pm
This bulletin which is correct and a BMW issued doc also states that a warning lamp will not be illuminated on the dash which is also correct .
However changing the oil and resetting adaptions is the first logical step with this.
Hope it sorts it for you.
Cheers
Steve
X5 3.0i Topaz Blue , Paddle shift steering wheel , Pioneer double din sat nav,Alpine speaker upgrade, Remap, HID’s,20inch lemans alloys,lemans arch kit,Depo light kit,carbon fiber interior wrap.
1989 BMW 325i SPORT E30 Fully equiped summer toy.
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
Re: 54c6 oil abrasion
Post
by jaynana » Wed Aug 08, 2012 9:47 pm
car went to indy today.
indy said 2 things found:
1. 54c6 oil abrasion
2. some steering angle sensor issue.
oil changed and adaptation values reset; plus steering angle sensor was re-calibrated (not replaced) — whatever that means.
lights gone off. PHEW!!!
but then i just hooked up my scanner just now. it shows below:
54C6: oil abrasion: [red/fault currently present]
04: 90 degrees of wiper too large (Adjustment operation) [yellow/fault currently not present]
any idea what this means? called indy and i’ll be checkin with him after work tomorrow.
of course the light’s off. so in a way if i didn’t have the scanner i’d be a happy man right now.. but then will it come back any moment..
other x projects stay suspended 
j
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic
Previous: BMW X5 E53 Facelift 3.0d
-
X5Sport
- Global Moderator
- Posts: 18203
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6……
Re: 54c6 oil abrasion
Post
by X5Sport » Wed Aug 08, 2012 9:53 pm
It may be that he failed to clear down the fault memory properly?
Never anthropomorphise computers. They hate that.
-
Sanj
- Lifer
- Posts: 5624
- Joined: Sat Jul 31, 2010 11:45 am
- Location: Berkshire
Re: 54c6 oil abrasion
Post
by Sanj » Wed Aug 08, 2012 10:00 pm
[quote=»jaynana»]
any idea what this means? called indy and i’ll be checkin with him after work tomorrow.
of course the light’s off. so in a way if i didn’t have the scanner i’d be a happy man right now.. but then will it come back any moment..
j
[/quote]
This is one of the only reasons why I don’t have a scanner — too much knowledge can also drive you nuts!
Scn Protect,Alarm Chirp,Ashtray del,Sub install,IV2,Screens,PS2 Media,Chrome rings,Schnitzer pedals,Reverse cam,Silver Grills,F/mirrors,Comp Spkrs,Heated S/W,20″168s,Splash scn,Arches,Remap,LED Tails,ACS Spoiler,’is’ Bumper Trim,Rear heated seats,Rear blinds
-
stevox5
- Member
- Posts: 204
- Joined: Sat Jul 31, 2010 6:53 pm
- Location: South Wales
54c6 oil abrasion
Post
by stevox5 » Wed Aug 08, 2012 10:01 pm
The steering angle sensor fault code will be what triggered the warning lamp.
Is your steering wheel dead straight when going in a straight line ? If so re calibration should sort it out , if the wheel is off centre you will need 4 wheel alignment then calibration again to get it 100%
As for the fault codes get the guy to clear them again , road test the car with you then recheck the memory to ensure all is well.
Good news with the codes that were recorded as its nothing serious and remember the oil ageing fault code is merely a prompt to get the oil changed as a service item and will not illuminate a warning lamp this was down to the steering angle sensor do it seems.
X5 3.0i Topaz Blue , Paddle shift steering wheel , Pioneer double din sat nav,Alpine speaker upgrade, Remap, HID’s,20inch lemans alloys,lemans arch kit,Depo light kit,carbon fiber interior wrap.
1989 BMW 325i SPORT E30 Fully equiped summer toy.
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
Re: 54c6 oil abrasion
Post
by jaynana » Wed Aug 08, 2012 10:14 pm
thx
yes the car drives dead straight no issues.. last being yesterday on the m40. so i know this for sure.
yeah, maybe the codes weren’t cleared.. although unlikely. i didn’t clear them today either. cos i want to show it to the indy.
j
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic
Previous: BMW X5 E53 Facelift 3.0d
-
jaynana
- Snr Member
- Posts: 1875
- Joined: Mon Nov 14, 2011 11:31 pm
- Location: Amersham
Re: 54c6 oil abrasion
Post
by jaynana » Sat Aug 11, 2012 2:29 pm
ok guys, updates, and the 4×4 light woes are not over yet so need help pls.
reset the error codes with teh scanner, and ran about 50 miles (mostly moterway + A roads) today am.
here’s the update.
the 4×4 light goes off, and then sometimes it comes up. on the next start it may go off.
came home and hooked up the scanner again, and here’s what i find:
first of all the previous error ‘oil abrasion’ does not come up any more (phew.. — so the transfer box seems safe!)
below are the errors reported:
(btw i’m using standard tires on both front and rear — not sure what that tire size thing means as well..)
so you’re right — it seems to be the steering angle sensor giving me grief!
it also seems to suggest that adjustment is what is required (on one of the msgs) but thats what was done last time as well.
pls help if you can, share any knowledge, thoughts.
cheers
j
Current: BMW 640i Convertible (320PS)
Audi A7 Sportback 3.0 T FSI quattro (300 PS) SE STronic
Previous: BMW X5 E53 Facelift 3.0d
-
stevox5
- Member
- Posts: 204
- Joined: Sat Jul 31, 2010 6:53 pm
- Location: South Wales
54c6 oil abrasion
Post
by stevox5 » Sun Aug 12, 2012 10:04 am
What did the garage do to get rid of the fault code for the oil change in the transfer box?
I would get the car back to them so they can test the signal from the steering angle sensor with their diagnostic tool whilst turning the wheel lock to lock,if this is ok at time of test check the witting connection to the sensor.
If this checks out I would recode the sensor (if they have the correct equipment) then recalibrate it again and try that first(has worked for me in the past)
If fault persists may need a new sensor. Hard to be more help without checking it personally but from the info you have given that would be my approach .
Good luck
X5 3.0i Topaz Blue , Paddle shift steering wheel , Pioneer double din sat nav,Alpine speaker upgrade, Remap, HID’s,20inch lemans alloys,lemans arch kit,Depo light kit,carbon fiber interior wrap.
1989 BMW 325i SPORT E30 Fully equiped summer toy.