Ошибка amdkmpfd sys

This bluescreen error happens with AMD Radeon HD 7700M Series.

Driver date 11/05/2021

Driver version 27.20.20903.8001

Class Guid {4d36e968-e325-11ce-bfc1-08002be10318}

Hardware ids

I tried to disable the fast boot to see what happens but the bluescreen now triggers when waking from Sleep mode.

I disabled and removed the latest driver, tried to install the vendor original for Windows 10 but the installation fails, after this Device manager has shown an older version:

Driver provider: Advanced Micro Devices, Inc.

Driver date: 21/08/2020

Driver version: 27.20.1034.6

I didn’t install any older version of Intel Chipset driver and Intel management Engine Interface Driver.

It seems that waking from Sleep mode is no longer triggering the blue screen. But I’ll be following up this.

Does your Windows 11 or 10 restart abruptly and display blue screen with a bug check code instead of going to the desktop? This may be amdkmpfd.sys BSOD error that has a relation with AMD graphics and is commonly accompanied by Driver Irql Not Less Or Equal.

The error message is What failed: amdkmpfd.sys and it usually arises when the AMD display driver is not supporting, out of date, or corrupt. Furthermore, this Blue screen is commonly caused by broken system files, faulty drivers, and conflict with third-party programs.

Here is how to fix amdkmpfd.sys Blue Screen Error BSOD in Windows 11 or 10 –

Way-1: Disable Switchable graphics in BIOS

For multiple users, this BSOD error is solved only after disabling the Switchable graphics through BIOS. So follow –

For DELL

1. Shut down your computer.
2. Now press the power button to turn it on and hold down F12 key.
3. Choose BIOS Setup.
4. Once you are on the BIOS screen, expand – Video group.
5. Select – Switchable Graphics.
6. Deselect the box for – Enable Switchable Graphics.

1. Select Apply and the Exit.

For HP

1. Press the power button of the PC and hold down Esc.
2. When on the next screen, press F10 key.
3. Select – Advanced.
4. Choose – Built-In Device Options.
5. Select Graphics and then Discrete Graphic.
6. Click Save, and, when appeared, click Save changes and then exit BIOS.

Now start your computer without encountering the amdkmpfd.sys Blue Screen error.

Check what is causing this bug check – How to Use BlueScreenView to Detect the Cause of Blue Screen.

This may also help – WhoCrashed: A Tool to analyze Dump and reveal culprit driver on Windows

Way-2: Run SFC and DISM

Corrupted system files are one of the most common causes of significant errors such as the amdkmpfd.sys BSOD in Windows 10 or 11. Malware in the form of third-party programs and other factors may cause the files to behave abnormally. This might occur as a result of faulty system files or registry entries. Although System File Checker is a built-in utility that allows Windows to repair the glitch.

Similarly, the DISM utility will assist you in dealing with errors in Windows image files. So, to use both of these WIndows utility tools follow the steps mentioned below:

1. Click – Search.
2. Type in – cmd.
3. On the User Account Control box, select Yes.
4. Next, type sfc /scannow in the command prompt.

1. Press – Enter and wait for the scan to complete.
2. Restart your PC to see if the issue is resolved.
3. If system again returns the error you should attempt repairing Windows image with DISM further.
4. For this, launch the Command Prompt with admin privileges.
5. Copy-paste each of the following cmd commands one at a time –

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

1. Press – Enter.
2. Restart your System after the repairing process is complete.

See – Dump File Location Windows 11 or 10.

Way-3: Remove and then Reinstate the Graphic Drivers

As previously stated, the blue screen amdkmpfd.sys is caused by an issue with the AMD display driver. Therefore, you must have to remove or uninstall the graphics card application preferably using Device Manager. Then restart your PC and go to the support page of the manufacturer’s website and download and install the recommended version of driver.

1. Right-click on the Start.
2. Select – Device Manager.
3. Double Click on – Display adapters.
4. Locate  Graphics Card from the list and right-click on it.
5. Choose – Uninstall device.
6. A small dialog window will appear; check the box saying – Attempt to remove the driver for this device.
7. Click on – Uninstall.
8. Restart your computer and If the blue screen persists, visit the AMD Support website.
9. Search for your product and download and install the appropriate driver.

If you are still seeing the concerned BSOD error then, move on to the next way,

Way-4: Give a shot to Clean Boot

Windows provides a method for loading only the most basic built-in services and processes. Consequently, users have to rely on various third-party apps for advanced and extensive tasks. But sometimes the behavior of these programs is inconsistent and nasty compelling windows to generate amdkmpfd.sys. blue screen error.

There is a built-in tool Clean Boot that bypasses this situation by preventing services and processes created by third-party applications. You need to only follow these steps –

1. Press – Windows + Q.
2. Type – msconfig.
3. Hit – Enter.
4. Choose the Services tab.
5. Select – Hide all Microsoft services.
6. Then, choose – Disable all.

1. Click on – Boot Tab.
2. Select – Open Task Manager.
3. Right-click on each program in Task Manager.
4. Choose Disable.
5. Dismiss the task manager.
6. Navigate to the System Configuration window.
7. Click OK and then Apply.
8. Choose – Restart.

Way-5: Analyze Disk for Errors

Several customers have objected and complained about seeing a blue screen with the problem with bug check on Windows 11/10 under specific settings and situations. In most cases, you will get a blue screen with a message stating your PC encountered a problem and must restart.

Blue screen error amdkmpfd.sys may occur when a disk device is faulty. However, Windows has a command-line utility for disk inspection and repair; so follow these steps:

1. Enter – Win+R.
2. Type the following command: chkdsk C: /f /r /x
3. Press – Enter.
4. Type Y.
5. Then, Hit “Enter”.
6. Follow the instructions coming on the screen and in the end reboot your computer.

Way-6: Use System Restore

You can try a system restore because this will revert your system to a previous configuration and arrangement. Using this can revert BSOD to the normal state of computer if you move forward with the steps:

1. Go to the Windows Search menu (Win+S).
2. Then, type rstrui.
3. Press – Enter.
4. When the ‘System Restore’ wizard prompts go with ‘Choose a different restoration point’ > Next.
5. Highlight a point of time when the blue screen did not occur.
6. Select – Next.
7. Now press the Finish button.
8. Allow the operating system to restore because it will most likely take a long time.

Following the aforementioned 5 ways will help you to fix amdkmpfd.sys Blue Screen Error in your Windows 11 or 10 as it’s a mere graphic driver issue which can be resolved quite easily.

Methods:

Way-1: Disable Switchable graphics in BIOS
Way-2: Run SFC and DISM
Way-3: Remove and then Reinstate the Graphic Drivers
Way-4: Give a shot to Clean Boot
Way-5: Analyze Disk for Errors
Way-6: Use System Restore

That’s all!!

Repair any Windows problems such as Blue/Black Screen, DLL, Exe, application, Regisrty error and quickly recover system from issues using Reimage.

Did your device turn blue displaying amdkmpfd.sys failed BSOD Error and you are wondering what to do next? Well, you just encountered a blue screen of death error which is a part of the Driver_Irql_Not_Less_Or_Equal stop error code. 

In this post, we will cover what exactly causes such an error code, and the relevant fixes that might solve it on Windows 11/10 PC. When this problem occurs, you might see a Blue Screen resembling the below snapshot. 

What causes this amdkmpfd.sys failed BSOD Error?

Amdkmpfd.sys is basically a system driver in which Amdkmpdf stands for AMD Kernel Miniport Filter Driver. The Blue Screen must be appearing because this system driver has failed to start and thus results in a BSOD error. This could also be occurring when this AMD driver is not supporting or has become incompatible somehow. 

The other reasons that might also result in similar error codes are as follows –

• You have enabled the Switchable Graphics feature inside BIOS.
• Missing or damaged system files and folders
• Corrupt or faulty display adapters
• You have installed a conflicting third-party app on your computer

If you are getting a blue screen error due to failing amdkmpfd.sys on Windows 11/10, attempt the below fixes one by one. Make sure to apply the below fixes in the same order as they were put in.

Before you apply any fix, make sure to boot your Windows into Safe mode first. This is important as you can’t apply any fix without booting into this mode. 

1] Disable Switchable Graphics inside BIOS

Switchable Graphics is a new feature that allows switching between the Intel® graphics and a discrete graphics controller on your Windows PC. If you have a device supporting this feature, the amdkmpfd.sys failed BSOD error must be occurring because of it. Disable the Switchable Graphics feature inside BIOS and this might solve the blue screen error on your computer. 

Here’s how to perform this task – 

• Shut down your PC first by pressing the power button. 
• Wait for the next 15-20 seconds, and then press the Power button again. 
• While Windows 11/10 is loading, hit the F12 key 2-3 times. The BIOS key varies from one device to another. So, do check for the same for your laptop/desktop.
• Assuming you are inside the BIOS, locate and click Video Group. 
• Go to the Switchable Graphics, and uncheck the box – “Enable Switchable Graphics”.
• Click Apply and then come out of this BIOS Setup screen.

HP users may follow these steps –

• Use the f10 key to boot into the BIOS Screen while Windows is loading.
• Go to Advanced > Built-in Device Options, and select Graphics.
• Use the arrow keys and change this option to Integrated Graphics. 

• Click Save and then Save Changes to confirm the recent modifications inside BIOS. 

Restart your PC and check if the Blue Screen issue resolves on your computer. 

2] Uninstall the Graphics drivers

The device drivers play an important role in connecting your hardware to software. Over a period of time, these drivers become obsolete and may result in kernel errors. The amdkmpfd.sys failed BSOD Error is mostly the work of issues within the AMD display driver. So, uninstall the existing graphics driver on your Windows PC using the below steps.

• Press Win + X, and select Device Manager.
• On the upcoming screen, locate and click to expand Display adapters.
• Right-click on the available driver, and select Uninstall device.

• After the display adapter uninstalls successfully, restart your PC. 

When Windows 11/10 reloads, the uninstalled adapter will reinstall on its own. Check if the amdkmpfd.sys failed BSOD Error resolves from here onward. 

3] Check your hard disk using CHKDSK

Blue screen of death errors mostly occurs because of bad sectors inside the hard disk. Go and check the current status of your disk drive using CHKDSK. Here’s what you need to do next –

• Press WIN + X, and choose Terminal (Admin).
• On the terminal, copy/paste the following, and press Enter. 

chkdsk C: /f /r /x

• Since your root drive is already in use, this command won’t run. Rather, this will ask if you would like to run this tool the next time your PC restarts. 
• Type “Y“, and press Enter. Restart your PC next and the CHKDSK tool will come into action.
• This is a time taking process, so you need to wait till this is over. 
• In the end, you will get a report stating whether you can use your HDD or not. 

Do as it recommends, and hopefully, the amdkmpfd.sys failed BSOD Error resolves this way. 

4] Run SFC & DISM Scans

Third-party applications are known to interact with the system files and corrupt them. Many of us still use external antivirus programs to safeguard our devices. Well, these programs do more harm than good. For example, these apps will consume more system resources and thus very few resources are left for system apps or programs that you run very often. 

Because of this interaction, some system files may start missing or become corrupt. To bring back or repair such files, run the System File Checker tool. Here’s how to perform this task –

• Launch CMD as administrator first.
• Copy/paste the below command on it, and press Enter.

sfc /scannow

• Wait for this tool to automatically detect and resolve system file corruption. 
• When this repairing process attains 100%, execute the below command on the same prompt –

Dism /Online /Cleanup-Image /RestoreHealth

• We suggest running this tool as DISM can find and resolve corruption within the System Image.
• Wait again for this tool to finish its repairing task. This whole process will take 10-15 minutes. 
• After you execute both SFC and DISM Scans successfully, restart your PC.

Sin back into your device and check if the blue screen stops appearing on your lock screen.

5] Use a Restore Point 

We often see solving one blue screen error code results in another BSOD error and this trend continues. For example, when you resolve the issues that were failing amdkmpfd.sys, some other system file starts failing. This might happen in cases where your system is corrupted beyond repair by using normal workarounds. 

If you had created a system restore point when your system was functioning well, use this backup to revert back your device to its normal working state. However, if you haven’t enabled System Protection on your C: drive, you may skip this restoration process. 

In case you are able to boot into Safe Mode on your PC, follow this guide. Else, use the below steps to restore your Windows PC to its original state via Startup Repair. 

Assuming you do have a restore point, use these steps to restore your Windows PC to its original state –

• Power On and off your device 2-3 times using the power button.
• Your device will boot next into the Automatic Repair Screen.
• Go to Troubleshoot > Advanced Options, and click on System Restore. 

• Wait for the system to detect the restore points available on your PC. When it does display the latest restore point or the available ones, choose one and follow the on-screen instructions. 

I hope the amdkmpfd.sys failed BSOD Error resolves automatically when your device reboots. 

6] Clean Install Windows 11 or Windows 10 on your PC

In case you have not enabled the system protection, there won’t be any restore point available on your computer. Well, all you can do now is perform a clean installation of Windows 11 or 10 on your device. The complete guide to installing both these operating systems is as follows –

• Clean Install Windows 11, version 22h2 
• Clean Install Windows 10, version 22h2

I hope the amdkmpfd.sys failed BSOD Error resolves after applying the fixes outlined above. Let’s know in the comment section if you face difficulty following any section on this post.