Ошибка capture noise print

Noise Reduction is destructive and as such can only be carried out in the Waveform view.

• Follow
• Report

In Response To ryclark

• Follow
• Report

In Response To ryclark

Hi,

What if Capture Noise Print is greyed out in the Waveform view? 

• Follow
• Report

In Response To capytanred

You can only capture a Noise Print from a small selection of your audio file. So if Capture Noise Print is greyed out it probably means that you haven’t selected a small enough sample from your audio. You only need a few seconds of the background noise without any foreground sound on it.

• Follow
• Report

In Response To ryclark

When I went from Effects / Noise Reduction / Capture Noise Print — is greyed out but when I went to Noise Reduction (Process) the I was able to Capture Noise Print.  This seemed like a fine work around but I’m not sure why the option doesn’t work.  There was only a few seconds so I’m not sure but I guess its a non-issue.  Thanks for your time here!

• Follow
• Report

In Response To ryclark

Hello, I am in Waveform view and have ~2.5 seconds of my file selected (a selection that I would like to use as my Noise Print), yet I am still seeing the «Capture Noise Print» option greyed out.
I have also tried clicking the «Select Entire File» option and then narrowing that selection down to the 2.5 seconds of noise, but this does not work either.

Any thoughts or suggestions?

Also, I am extremely new to Audacity, so I might be missing something basic. Any help would be appreciated.

• Follow
• Report

In Response To maxhorcher

I’m presuming that you mean Audition…

The mistake most people make is to try to capture noise prints without bothering to open the NR app first. If you happen to make a selection that the app considers to be, for instance, too short for the FFT size, then it simply won’t capture it. It’s important to realise that you absolutely don’t have to capture the noise print first. You can open it, still make an appropriate selection and use it — without closing the app at all. Yes you get the big black message all over the display, but note carefully the bit I’ve circled:

You can alter all the settings to be the way you want before making the selection, and I’ve never known this method of using it to fail — unlike trying to make a selection first, which can potentially lead to problems because of FFT sizes.

• Follow
• Report

In Response To SteveG_AudioMasters_

I’m also having an issue with NR in 14.2 on a M1 Mac.

I’ve used Audition to suck noise out of a speaker’s voice for over a decade, with no problems. If I created a ‘noise print’, I could very easily sample a new selection and the ‘capture noise print’ option would not be greyed out. With 14.2, Once I set the noise print, I cannot change that sample, unless I quit the application and relaunch.

I can’t speak for anyone else, but I’ve used this function countless times and it simply does not work properly in 14.2.

Then again, Audition can’t even manage *playback* in 14.2, which for an audio application seems like a pretty massive bug.

• Follow
• Report

In Response To malieckal

Then you have a faulty installation. If what you said was universally true, then everybody would be complaining, and they aren’t. Initially, I’d suggest resetting your preferences.

• Follow
• Report

In Response To SteveG_AudioMasters_

This is quite helpful.

However, I’m still seeing issues. I have up to 10 seconds of track to select, and no matter how much I select, ‘Capture Noise Print’ stays grayed out… oops. Now it showed up. I don’t know what made it work.

I was trying everything, especially what you said about keeping the app open. (Didn’t know I could do that—thanks for the tip!) Then when I went back to check my math before posting, it was available again. I have run into ‘not enough track selected’ in the past, so I knew that wasn’t my issue. Not sure what finally made it available, so I’m also confused by that, but it’s working for now so I guess I won’t worry about it!

Running Audition build 22.0.0.96 (active Creative Cloud subscription) on a 2019 iMac that I upgraded 2 days ago to macOS Monterey 12.0.1.

• Follow
• Report

In Response To SteveG_AudioMasters_

I am sorry … I did not completely understand your answer. But that window was exactly, what I got. I have successfully made noise prints before. But yesterday, I was editing in Adobe Premiere, right clicked audio and automatically went over to Audition, which popped open, to work on audio over there (voice, interview). I was in wave form. When I tried to capture a noise print, it was always greyed out. And I got that window, you show, a lot. I gave up.

• Follow
• Report

In Response To ryclark

Thanks for taking the time to answer, but your reply is so lacking context as to be useless.

• Follow
• Report

In Response To BartonGarrett256

Useless to whom? the May 29th. poster found the answer he required in order to carry out the operation he asked about.

• Follow
• Report

In Response To BartonGarrett256

BartonGarrett256 wrote:

Thanks for taking the time to answer, but your reply is so lacking context as to be useless.

The replies in this thread — with the exception of this one — appear to make perfect sense. What ‘context’ do you want?

• Follow
• Report

In Response To BartonGarrett256

• Follow
• Report

xq no abre los adobe audition

[Mod note: this thread is complete and requires no more comments, especially if they are completely irrelevant. It is now locked.]

• Follow
• Report

A couple of things: We don’t know what your FFT settings are in NR — that information is relevant. Also, NR has always been better at capturing noise prints when the app itself is opened first (don’t know why — it just is). If you do it that way, you get immediate feedback about incorrect settings — particularly the one about the noise print being too short for the FFT size…

• Follow
• Report

In Response To SteveG_AudioMasters_

I’m pretty new to Audition. The FFT setting in NR is 4096 with Noise Print Snapshots at 4,000. It worked when I opened the app first. Thanks.

• Follow
• Report

Is the concern the time measurement in the lower-left side of the status bar, or are there other issues you’re experiencing?

• Follow
• Report

I am having this same issue with Audition CC 2020.  I’m working in waveform, selected 1.5 seconds, the menu is greyed out.  Please advise.

• Follow
• Report

In Response To sharons24183529

@sharons24183529 can you please post a screenshot?

• Follow
• Report

Semyon 7612

2023-02-14 06:00:56

Taser

2021-08-13 13:19:34

Успешный Жеребчик

2020-11-30 10:48:27

Наталья Гуркина

2020-08-28 12:40:50

r/AdobeAudition

•