Ошибка извлечения can not delete output file hp

После загрузки программного обеспечения принтера на компьютере с Windows 10 версии 1803 и выше отображается ошибка Ошибка извлечения, не удается удалить выходной файл и программное обеспечение установки не открывается. Вручную откройте программное обеспечение установки для завершения настройки
принтера.

Сообщение об ошибке Ошибка извлечения, не удается удалить выходной файл в Windows

Принтеры HP LaserJet Pro M12, M1130, M1210, P1100, P1560, P1600

Используйте программу «Выполнить» в Windows, чтобы вручную открыть установленное программное обеспечение.

  1. На компьютере щелкните правой кнопкой мыши кнопку Пуск, затем выберите Выполнить.

  2. Введите один из следующих путей к файлу для вашего принтера:

    • Принтеры HP LaserJet Pro P1100, P1560 и P1600: C:LJP1100_P1560_P1600_Full_SolutionHpSetup.exe

    • Принтеры HP LaserJet Pro M12: C:LJPM11-M13_Full_SolutionHpSetup.exe

    • МФУ HP LaserJet Pro M1130, M1210: C:M1130MFP_M1210MFP_Full_SolutionHpSetup.exe

    Ввод пути к файлу в диалоговом окне Выполнить в Windows

  3. Нажмите кнопку OK, чтобы начать установку, затем следуйте инструкциям, чтобы завершить настройку принтера.

Все прочие принтеры HP

Найдите и вручную откройте программное обеспечение установки в Windows.

  1. Найдите и откройте пункт Этот компьютер.

  2. Откройте жесткий диск вашего компьютера, например Windows (C:).

  3. Найдите имя принтера в списке.

    • Если отображается имя принтера, откройте папку, щелкните правой кнопкой мыши файл setup.exe и следуйте инструкциям.

    • Если имя принтера не отображается, выполните следующие действия.

  4. На компьютере найдите и откройте папку %temp%.

    Поиск папки temp в Windows

  5. В папке temp выполните поиск 7z.

  6. Откройте папку вашего принтера в списке. Если у вас несколько папок 7z, отсортируйте их по дате, затем откройте недавно созданную
    папку.

    Открытие папки 7z в файлах Temp в Windows

  7. Щелкните правой кнопкой мыши файл setup.exe, затем щелкните Запуск от имени администратора, чтобы начать установку.

    Выбор Запуск от имени администратора в Windows

  8. Следуйте инструкциям для завершения настройки принтера.

Источник

After downloading the printer software on a computer with Windows 10 version 1803 and later, an Extraction Failed Can not delete output file error message displays and the install software does not open. Manually open the install software to finish the printer setup.

The Extraction Failed Can not delete output file error message in Windows

HP LaserJet Pro M12, M1130, M1210, P1100, P1560, P1600 printers

Use the Windows Run program to manually open the install software.

  1. On the computer, right-click the Start button, and then select Run.

  2. Type one of the following file paths for your printer:

    • HP LaserJet Pro P1100, P1560, and P1600 printers: C:LJP1100_P1560_P1600_Full_SolutionHpSetup.exe

    • HP LaserJet Pro M12 printers: C:LJPM11-M13_Full_SolutionHpSetup.exe

    • HP LaserJet Pro M1130, M1210 Multifunction printers: C:M1130MFP_M1210MFP_Full_SolutionHpSetup.exe

    Typing a file path in the Run dialog box in Windows

  3. Click OK to start the installation, and then follow the prompts to finish the printer setup.

All other HP printers

Locate and manually open the install software in Windows.

  1. Search for and open This PC.

  2. Open your computer hard drive, such as Windows (C:).

  3. Locate your printer name in the list.

    • If your printer name displays, open the folder, right-click the setup.exe file and follow the prompts.

    • If your printer name doesn’t display, continue with these steps.

  4. On your computer, search for and open the %temp% folder.

    Searching for the temp folder in Windows

  5. In the temp folder, search for 7z.

  6. Open the folder for your printer in the list. If you have multiple 7z folders, sort by date, and then open the most recent
    folder.

    Opening the 7z folder in the Temp files in Windows

  7. Right-click the setup.exe file, and then click Run as administrator to start the installation.

    Clicking Run as adminstrator in Windows

  8. Follow the prompts to finish the printer setup.

Источник

After downloading the printer software on a computer with Windows 10 version 1803 and later, an Extraction Failed Can not delete output file error message displays and the install software does not open. Manually open the install software to finish the printer setup.

The Extraction Failed Can not delete output file error message in Windows

HP LaserJet Pro M12, M1130, M1210, P1100, P1560, P1600 printers

Use the Windows Run program to manually open the install software.

  1. On the computer, right-click the Start button, and then select Run.

  2. Type one of the following file paths for your printer:

    • HP LaserJet Pro P1100, P1560, and P1600 printers: C:LJP1100_P1560_P1600_Full_SolutionHpSetup.exe

    • HP LaserJet Pro M12 printers: C:LJPM11-M13_Full_SolutionHpSetup.exe

    • HP LaserJet Pro M1130, M1210 Multifunction printers: C:M1130MFP_M1210MFP_Full_SolutionHpSetup.exe

    Typing a file path in the Run dialog box in Windows

  3. Click OK to start the installation, and then follow the prompts to finish the printer setup.

All other HP printers

Locate and manually open the install software in Windows.

  1. Search for and open This PC.

  2. Open your computer hard drive, such as Windows (C:).

  3. Locate your printer name in the list.

    • If your printer name displays, open the folder, right-click the setup.exe file and follow the prompts.

    • If your printer name doesn’t display, continue with these steps.

  4. On your computer, search for and open the %temp% folder.

    Searching for the temp folder in Windows

  5. In the temp folder, search for 7z.

  6. Open the folder for your printer in the list. If you have multiple 7z folders, sort by date, and then open the most recent
    folder.

    Opening the 7z folder in the Temp files in Windows

  7. Right-click the setup.exe file, and then click Run as administrator to start the installation.

    Clicking Run as adminstrator in Windows

  8. Follow the prompts to finish the printer setup.

Hi@Vanilla1125,

Thanks for stopping by HP Support Forums.

I came across your post and would like to help.

Need assistance in fixing the installation issues. Is that, correct?

I recommend you to try the steps and install the driver from the below link and check if that solves the issue.

Uninstall the printer software using the steps below.

  • In Windows, search for and open Programs and features
  • Select your HP Printer
  • Select Uninstall
  • In Windows, search for and open Devices and printers
  • In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete‘ or ‘Remove Device‘
  • Open up the run command with the «Windows key + R» key combo.
  • Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)
  • Click on the «Drivers» tab
  • Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
  • Select Ok
  • Select Apply and Ok on the Print Server Properties windows
  • Close Devices and Printers

Then try installing the driver from the link below

http://hp.care/2nkawC4

Hope the solution answers your query. Feel free to reply back for more.

Resolv_S

«HP respects and is committed to protecting the personal information of our covered individuals.» You can read more in the HP Privacy Statement.

Note: HP Doesn’t recommend any upgrade/downgrade of any hardware/software parts or software that is bundled with the product. It may affect the manufacturer’s warranty.

Resolv_S
I work on behalf of HP

If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up« button!

Hi@Vanilla1125,

Thanks for stopping by HP Support Forums.

I came across your post and would like to help.

Need assistance in fixing the installation issues. Is that, correct?

I recommend you to try the steps and install the driver from the below link and check if that solves the issue.

Uninstall the printer software using the steps below.

  • In Windows, search for and open Programs and features
  • Select your HP Printer
  • Select Uninstall
  • In Windows, search for and open Devices and printers
  • In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete‘ or ‘Remove Device‘
  • Open up the run command with the «Windows key + R» key combo.
  • Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)
  • Click on the «Drivers» tab
  • Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
  • Select Ok
  • Select Apply and Ok on the Print Server Properties windows
  • Close Devices and Printers

Then try installing the driver from the link below

http://hp.care/2nkawC4

Hope the solution answers your query. Feel free to reply back for more.

Resolv_S

«HP respects and is committed to protecting the personal information of our covered individuals.» You can read more in the HP Privacy Statement.

Note: HP Doesn’t recommend any upgrade/downgrade of any hardware/software parts or software that is bundled with the product. It may affect the manufacturer’s warranty.

Resolv_S
I work on behalf of HP

If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up« button!

Hi@Vanilla1125,

Thanks for stopping by HP Support Forums.

I came across your post and would like to help.

Need assistance in fixing the installation issues. Is that, correct?

I recommend you to try the steps and install the driver from the below link and check if that solves the issue.

Uninstall the printer software using the steps below.

  • In Windows, search for and open Programs and features
  • Select your HP Printer
  • Select Uninstall
  • In Windows, search for and open Devices and printers
  • In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete‘ or ‘Remove Device‘
  • Open up the run command with the «Windows key + R» key combo.
  • Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)
  • Click on the «Drivers» tab
  • Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
  • Select Ok
  • Select Apply and Ok on the Print Server Properties windows
  • Close Devices and Printers

Then try installing the driver from the link below

http://hp.care/2nkawC4

Hope the solution answers your query. Feel free to reply back for more.

Resolv_S

«HP respects and is committed to protecting the personal information of our covered individuals.» You can read more in the HP Privacy Statement.

Note: HP Doesn’t recommend any upgrade/downgrade of any hardware/software parts or software that is bundled with the product. It may affect the manufacturer’s warranty.

Resolv_S
I work on behalf of HP

If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up« button!

Hi@Vanilla1125,

Thanks for stopping by HP Support Forums.

I came across your post and would like to help.

Need assistance in fixing the installation issues. Is that, correct?

I recommend you to try the steps and install the driver from the below link and check if that solves the issue.

Uninstall the printer software using the steps below.

  • In Windows, search for and open Programs and features
  • Select your HP Printer
  • Select Uninstall
  • In Windows, search for and open Devices and printers
  • In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete‘ or ‘Remove Device‘
  • Open up the run command with the «Windows key + R» key combo.
  • Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)
  • Click on the «Drivers» tab
  • Look for HP Printer driver. If you see it Click on it and click Remove at the bottom
  • Select Ok
  • Select Apply and Ok on the Print Server Properties windows
  • Close Devices and Printers

Then try installing the driver from the link below

http://hp.care/2nkawC4

Hope the solution answers your query. Feel free to reply back for more.

Resolv_S

«HP respects and is committed to protecting the personal information of our covered individuals.» You can read more in the HP Privacy Statement.

Note: HP Doesn’t recommend any upgrade/downgrade of any hardware/software parts or software that is bundled with the product. It may affect the manufacturer’s warranty.

Resolv_S
I work on behalf of HP

If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up« button!

На чтение 4 мин. Опубликовано 15.12.2019

‎08-31-2016 06:26 AM

Printer stopped working so I uninstalled it. Multiiple attempts to download the driver failed at the extraction stage with the error message «Extraction Failed: can not delete output file». I’ve seen similar issues from other users on this forum but don’t understand the solutions given. Can an HP person please direct me to the specific steps required to overcome this head-banger?

‎03-28-2017 06:22 PM — last edited on ‎03-28-2017 06:32 PM by danny-r

However when I dialed into my C drive HP files, and ran the HP Extract.exe file, I got a message saying the «File is not compatible». Compatible with what?

Mainly — what do I now download to cure this problem.

  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

installing printer driver error: can not delete output file

‎03-30-2017 12:45 PM

Thanks for stopping by HP Support Forums.

I came across your post and would like to help.

Need assistance in fixing the installation issues. Is that, correct?

I recommend you to try the steps and install the driver from the below link and check if that solves the issue.

Uninstall the printer software using the steps below.

  • In Windows, search for and open Programs and features
  • Select your HP Printer
  • Select Uninstall
  • In Windows, search for and open Devices and printers
  • In the Devices and Printers windows look for your HP printer . If you see it listed right-click on it and choose ‘ Delete ‘ or ‘Remove Device ‘
  • Open up the run command with the » Windows key + R » key combo.
  • Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)
  • Click on the » Drivers » tab
  • Look for HP Printer driver . If you see it Click on it and click Remove at the bottom
  • Select Ok
  • Select Apply and Ok on the Print Server Properties windows
  • Close Devices and Printers

Then try installing the driver from the link below

Hope the solution answers your query. Feel free to reply back for more.

Please click “ Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “ Kudos Thumbs Up » to say “Thanks” for helping!

«HP respects and is committed to protecting the personal information of our covered individuals.» You can read more in the HP Privacy Statement .

Note: HP Doesn’t recommend any upgrade/downgrade of any hardware/software parts or software that is bundled with the product. It may affect the manufacturer’s warranty.

Resolv_S
I work on behalf of HP

If you found this post helpful, you can let others know by clicking the “ Accept as Solution ” button. You can also show your appreciation, with a kudos, by clicking the “ Thumbs up » button!

using 7zip version 3.12
I’m getting an error when running:
D:>»c:Program Files7-Zip7z.exe» x d:sourcesource_images.zip -y -aou -od:unzip

can not delete output file
d:unzipimage.jpg

System error:
Operation aborted

I think the image.jpg exists, but the image is locked via another process (a web server). I have tried different overwrite switches (-aoa, -aos, -aou), and tried without the overwrite switch with no luck.

Is there any way to ignore or continue on this kind of error?

Источник https://bchtechnologies.com/blog/how-to-reset-hp-cartridge-chip/

Sometimes you may come across the strange problem of being unable to delete file or folder in windows 10. Issue 2 i cannot access, change, save, or delete files and folders issue 3 i cannot open a file or. After downloading the printer software on a computer with windows later, an extraction failed can not delete output file error message displays and the install software does not open. Create an account on the hp community to personalize your profile and ask a question. Your account also allows you to connect with hp support faster, access a personal dashboard to manage all of your devices in one place. Unplug the printers power, power down the computer, wait a minute or so then restart the computer.

The paper sensor, on my printer model hp4500 seems to only sense the paper at the beggining of the print job. 2 then input the command line del f filename and hit enter to force delete the file in windows 10 with cmd. Pdf book information and reviews for isbn,op wild west companion (werewolf 1997 ww3076 nuwisha. Utilcccuninstall-l2, utilcccuninstall-l3 and nothing popped up. Any recommendations for deleting the printer files or other options. The hp deskjet printer comes with a suite of software and utilities, including an online user guide, updater tool and drivers.

Популярные запросы

Ремонт бытовой техники в Москве
Google,Google,Google,Google,Google,

Источник

Hello ab90011, welcome to the forums:)

I read your post about the installation troubles you are running into when trying to install your HP printer on your Windows 8 and Windows 7 systems. I would first suggest disabling your firewalls on both PC’s and then running the HP Printer Install Wizard for Windows to try and install the printer.

If there is still an installation issue, please respond to me with the problem you are having and any errors that are apparent and which printer you are trying to install.

Also make a couple of copies from the printer itself to ensure the printer hardware is functioning properly before we continue software troubleshooting.

Help to find your printers Model Number:
How Do I Find My Model Number?

Have a wonderful Wednesday!

ℜ a i n b o w 7000

I work on behalf of HP

★

Click the “Kudos Thumbs Up» at the bottom of this post to say “Thanks” for helping!

Источник

installing printer driver error: can not delete output file

However when I dialed into my C drive HP files, and ran the HP Extract.exe file, I got a message saying the «File is not compatible». Compatible with what?

When you tried to install HP Printer driver, and you got «can not delete output file» error. I guess the article HP LaserJet installation won’t start on Windows 10 created by @ShlomiL might help you. HP Installation may already extract but didn’t launch the installation. You can m anually launch the installation wizard by find the installation file in you hard drive. e.g. HP LaserJet Pro P1102 / P1566 / P1606: The installation file might be C:LJP1100_P1560_P1600_Full_SolutionHpSetup.exe

Hope this helps. Please let me know. Thanks!

Thanks for stopping by HP Support Forums.

I came across your post and would like to help.

Need assistance in fixing the installation issues. Is that, correct?

I recommend you to try the steps and install the driver from the below link and check if that solves the issue.

Uninstall the printer software using the steps below.

Then try installing the driver from the link below

Hope the solution answers your query. Feel free to reply back for more.

Please click “ Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “ Kudos Thumbs Up » to say “Thanks” for helping!

Note: HP Doesn’t recommend any upgrade/downgrade of any hardware/software parts or software that is bundled with the product. It may affect the manufacturer’s warranty.

Resolv_S
I work on behalf of HP

If you found this post helpful, you can let others know by clicking the “ Accept as Solution ” button. You can also show your appreciation, with a kudos, by clicking the “ Thumbs up » button!

Источник

After downloading the printer software on a computer with Windows 10 version 1803 and later, an Extraction Failed Can not delete output file error message displays and the install software does not open. Manually open the install software to finish the printer setup.

HP LaserJet Pro M12, M1130, M1210, P1100, P1560, P1600 printers

Use the Windows Run program to manually open the install software.

Type one of the following file paths for your printer:

HP LaserJet Pro P1100, P1560, and P1600 printers: C:LJP1100_P1560_P1600_Full_SolutionHpSetup.exe

HP LaserJet Pro M12 printers: C:LJPM11-M13_Full_SolutionHpSetup.exe

HP LaserJet Pro M1130, M1210 Multifunction printers: C:M1130MFP_M1210MFP_Full_SolutionHpSetup.exe

Click OK to start the installation, and then follow the prompts to finish the printer setup.

All other HP printers

Locate and manually open the install software in Windows.

Open your computer hard drive, such as Windows (C:).

Locate your printer name in the list.

If your printer name displays, open the folder, right-click the setup.exe file and follow the prompts.

If your printer name doesn’t display, continue with these steps.

On your computer, search for and open the %temp% folder.

Open the folder for your printer in the list. If you have multiple 7z folders, sort by date, and then open the most recent folder.

Right-click the setup.exe file, and then click Run as administrator to start the installation.

Follow the prompts to finish the printer setup.

Источник

Источник

Понравилась статья? Поделить с друзьями:
  • Ошибка извините загрузка занимает больше времени social club
  • Ошибка или сбой 010 340
  • Ошибка избыточности зеркало
  • Ошибка или преступление сочинение итоговое
  • Ошибка иероглифы err no launcher gta 5 решено