Ошибка поставщика теневого копирования 80042306

Error checking your disks proves to be the most suitable solution

by Claire Moraa

Claire likes to think she’s got a knack for solving problems and improving the quality of life for those around her. Driven by the forces of rationality, curiosity,… read more

Updated on April 6, 2023

Reviewed by
Alex Serban

After moving away from the corporate work-style, Alex has found rewards in a lifestyle of constant analysis, team coordination and pestering his colleagues. Holding an MCSA Windows Server… read more

Windows users are reporting a new error 0x80042306 when creating a Restore point. This is a common error message, and it usually happens when you try to upgrade to a newer Windows version.

This could be because there is not enough space on the drive, or because no recent changes have been made to the computer. Nevertheless, it is an error that can make the upgrade process unsuccessful, so let’s look at how we can resolve it.

What is error 0x80042306 shadow copies? 

Error 0x80042306 indicates that Shadow Copies for Shared Folders is not working. Shadow copies (also known as System Restore Points) are a special type of restore point created by Windows Vista and later versions of Windows. 

They’re designed to capture the state of your computer at a certain point in time so that you can revert to it if something goes wrong with your system. 

The error comes from the VSS or the Volume Shadow Service, which is responsible for creating and maintaining the shadow copies. It may not be running or may have stopped unexpectedly. 

Other reasons for this error include:

• Network connectivity issues – Problems with the network or firewall settings can prevent your computer from accessing shared folders on other computers.
• Corrupted system files – Corrupted system files can result in errors when trying to access shared resources on another computer.
• Incorrect permissions – If you have been granted administrative rights but do not have permission to access a shared folder, you may receive this error message when you try to open it using Windows Explorer.
• Damaged partition table – If the partition table isn’t on the disk or it’s damaged, then Windows won’t be able to create any system restore points.

How do I fix error 0x80042306?

Before trying the advanced fixes, check the following first:

• Disable all startup programs and try again.
• Ensure you have enough hard drive space to create a restore point.
• Run System Restore from Safe Mode if it doesn’t work while running normally.

1. Run the CHKDSK utility 

1. Hit the Windows key, type cmd in the search bar, and click Run as administrator.
2. Type the following command and hit Enter. Remember to replace the C letter with your drive’s letter: chkdsk C: /f

2. Run the SFC scan

1. Hit the Windows key, type cmd in the search bar, and click Run as administrator.
2. Type the following command and hit Enter: sfc /scannow

There is another feasible solution to diagnose any corrupted system files on your PC and fix them automatically.

Namely, Fortect can help you repair Windows issues that determine the 0x80042306 error message.

3. Restart the Volume Shadow Copy service 

1. Hit the Windows + R keys to open the Run command.
2. Type services.msc in the dialog box and hit Enter.
3. Locate Volume Shadow Copy service, right-click on it, and select Properties.
4. Next to Startup type, click on the drop-down menu, select Automatic, then click on Start.
5. Click Apply and OK to save changes.

The Shadow Copy service runs in the background and creates copies of files and folders as they change. This allows you to restore older versions of files, even after they’ve been overwritten by newer versions. 

The service also creates a snapshot every time you install new software or make changes to your system configuration, so that you can recover from bad updates or other problems.

Read more about this topic

• Diskpart Failed to Clear Disk Attributes: 4 Ways to Fix
• Winsock Error 10038: How to Fix It

4. Restart the Windows Backup service

1. Hit the Windows + R keys to open the Run command.
2. Type services.msc in the dialog box and hit Enter.
3. Locate Windows Backup service, right-click on it, and select Properties.
4. Next to Startup type, click on the drop-down menu, select Automatic, then click on Start.
5. Click Apply and OK to save changes.

Microsoft Windows Backup Service is a built-in service that performs backup operations on the computer. If for some reason it had stopped, System Restore may not have any files to restore.

5. Perform a clean boot

1. Hit the Windows key, type msconfig, and open System Configuration.
2. Switch to the Services tab and select Hide all Microsoft services.
3. Click on the Disable all button, then hit the Apply button to save the changes.
4. Go back and click on the Startup tab, select Open Task Manager then click OK.
5. In the Startup tab of the Task Manager, Disable all the Enabled startup items.
6. Close Task Manager and restart your PC.

Sometimes, System Restore may not bring up an error, but you’ll find that the process is excruciatingly long. If so, we have an article on how to speed up the process.

We also share tips on what to do if your System Restore is unsuccessful so be sure to check out our expert article on the same.

For any additional thoughts on this topic, share them with us in the comment section below.

Recently, a few users encounter Error 0x80042306 while creating System Restore Point on their PCs. Today, in this blog post, we discuss the reasons and probable solutions to fix this trouble. This bug arises primarily after a failed update, malfunctioning Volume shadow copy service, and VSS components.

Error 0x80042306 may also occur when there are bad sectors on HDD or corrupt system files. Restart/ re-register VSS, Repair missing system files, Check health of HDD, Restart Volume shadow copy service may resolve this issue. If this bug still stays on your PC, try renaming system restore files may help to troubleshoot this error. Let’s explore the solutions in detail-

1. Restart Volume shadow copy service
2. Re-register VSS components
3. Run Chkdsk command
4. Perform System File Checker command
5. Rename system restore file
6. Change System Restore Space Usage

RECOMMENDED: Four different ways to use System Restore in Windows 10

Methods to solve System Restore point error 0x80042306

Here, we depict several ways to encounter this System Restore point error 0x80042306 on Windows 10 PC. They are-

1] Restart Volume shadow copy service

In case, Volume shadow copy service starts malfunctioning, this may arise error 0x80042306 while creating a restore point. To fix this bug, restart this service by following these simple steps-

Note: To perform this task, make sure you have logged in with an administrator account.

Step-1: Right-click on the Start and choose Run from the Power Menu.

Step-2: In the text box, type services.msc then press OK to launch Windows Services.

Step-3: When the page appears, reach out to the Volume Shadow Copy and right-click on the same.

Step-4: Now, select the Properties option on the context menu.

Step-5: If the services are not running, tap the Start option otherwise Stop and Restart it.

Step-6: Under Startup type, change its value to Automatic.

Step-7: Once you complete the above steps, Restart your system and try creating a restore point again.

I Hope, you can now do this without receiving error 0x80042306.

2] Re-register VSS components

The Volume Shadow Copy Service (VSS) is a useful service to accommodate data servers, backup applications, and storage management of your system. But any improper operation of this service leads to error 0x80042306 while Creating the Restore point. To manage this bug you need to re-registered this application just following the below easy steps-

• Right-click anywhere on the desktop and hover the mouse over New thereafter select Text Document.
• Now, opens this text document and copy/paste the following set of command lines inside.

cd /d %windir%system32
net stop vss 
net stop swprv 
regsvr32 /s ole32.dll 
regsvr32 /s oleaut32.dll 
regsvr32 /s vss_ps.dll 
vssvc /register 
regsvr32 /s /i swprv.dll 
regsvr32 /s /i eventcls.dll 
regsvr32 /s es.dll 
regsvr32 /s stdprov.dll 
regsvr32 /s vssui.dll 
regsvr32 /s msxml.dll 
regsvr32 /s msxml3.dll 
regsvr32 /s msxml4.dll 
vssvc /register 
net start swprv 
net start vss

• Succeeding after, save this file as .bat extension under Save as type: drop-down menu.
• Make a right-click again on this file and choose Run as Administrator.

This will re-register the Volume Shadow Copy Service on your system.

3] Run Chkdsk command

If some of the sectors have become corrupt on HDD may also arise this Error 0x80042306. To make sure what’s the fact, try executing the DISM command on your PC. This will scan the whole hard drive and repair the same if minor bugs exist. Here are the steps to proceed with-

• Type cmd in the search box then do the right click on Command Prompt option.
• Henceforth, choose Run as administrator from the context menu.
• If there appears a UAC, tap Yes.
• Type or copy/paste the following code near the blinking cursor to detect the problem.

chkdsk C: /f /r /x

Note: The parameter C: indicates the drive that keeps the OS file, f directs to fix the problem. Similarly, r is there to find out the bug and x starts the scanning process.

• If your system is a little busy, this displays a message to reschedule this task when the PC reboots.
• Press Y to give your permission.

Lastly, Restart the computer again and check if this issue gets solved or not.

4] Perform System File Checker command

Sometimes, the bug lies in the core system files. If that’s the case, try executing “sfc/scannow” command line on your PC. This may resolve this Create Restore point error 0x80042306 issue. The steps are quite easy to follow-

• At first, right-click on the windows icon and choose Run from the pop-up menu.
• In the text area, type cmd and simultaneously press Ctrl+Shift+Enter to begin command Prompt as Administrator.
• If the UAC Screen prompts, click Yes.
• Now, type sfc /scannow near the blinking cursor followed by the Enter key.

• This whole scanning and repairing will take approx. 10 minutes, so wait accordingly.
• Once over, Reboot your PC and sign-into your System.

5] Rename system restore file

If you still experience error 0x80042306 while creating a restore point, renaming this file may help to sort out this issue. Here’s how to proceed-

• Press Win-logo and R together to open the Run dialog.
• In the void box, write the following command then hit Enter at the end.

%windir%System32TasksMicrosoftWindowsSystemRestore.

• Thereupon, locate the directory SR and rename it to SR.sav.

• After you rename this file, Restart your PC to see whether it actually solves the trouble or not.

6] Change System Restore Space Usage

The best way to change the disk space used by System Restore is through Windows itself. Strangely, the option to change the maximum available space was present in Windows XP, then was removed in Vista, but put back again from Windows 7 onward. Here are the steps-

• Go to Search and type systempropertiesprotection in the void area then click on the same option.
• Once a new window appears, jointly press the Win and Pause/Break key.
• Again from the left column, tap the System protection link.
• Switch back to the C: drive and hit the Configure button.

• Henceforth, enable the Turn on system Protection radio button.

• Scroll the slider and set the space percentage that you want to use on the selected disk drive in either GB/MB.
• At last, tap OK to confirm the changes made so far.

Note: There exists a counter that displays the current Usage of space. In case, you set the new disk space lower than the current one, this will delete some of the files of earlier Restore points so as to accommodate as per the newly assigned disk space.

0x80042306 error occurs when configuring shadow copies for clustered mount points on another drive in Windows Server 2012

This article helps fix the error 0x80042306 that occurs when you configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume.

Original product version: Windows Server 2012 R2
Original KB number: 2828270

Symptoms

When trying to configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume, it may fail. Additionally, you may receive the following error message:

Failed to create the storage area association.
Error 0x80042306: The shadow copy provider had an error.

Other symptoms you might observe when trying to configure previous versions for a mount point on another volume:

• Cluster Disk goes offline
• You may receive the following event logged for VSS:

Cause

The error occurs because of mismatch in cluster online and offline timeouts. There’s a premature exit after calling resource online/offline.

Workaround

To work around this problem, consider modifying the registry values by following the steps mentioned below.

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

On the Start screen, click the Search tile.

Type regedit in the Search window and then double-click regedit.exe.

Locate the following registry entry: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesVSSSettings

Right-click ClusterOfflineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Right-click ClusterOnlineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Exit Registry Editor, and then restart the computer.

Note: The Decimal value can be increased as per requirement.

Источник

Как исправить: Не удается создать ошибку точки восстановления 0X80042306

При попытке создать точку восстановления вы получаете сообщение защиты системы с кодом ошибки 0X80042306, указывающее, что точка восстановления не может быть создана.

Причина: «У поставщика теневого копирования произошла ошибка. Проверьте журналы событий системы и приложений для получения дополнительной информации. (0x80042306)»

Эта ошибка также может возникнуть, если служба теневого копирования томов остановлена. Это происходит, когда служба теневого копирования томов (VSS) не может работать из-за установки в системе другого поставщика управления снимками.

Очистить громкость

Объем должен быть очищен.

vssadmin удалить тени / для = удалить тени

vssadmin удалить тени / for =

Обновить:

Теперь мы рекомендуем использовать этот инструмент для вашей ошибки. Кроме того, этот инструмент исправляет распространенные компьютерные ошибки, защищает вас от потери файлов, вредоносных программ, сбоев оборудования и оптимизирует ваш компьютер для максимальной производительности. Вы можете быстро исправить проблемы с вашим ПК и предотвратить появление других программ с этим программным обеспечением:

• Шаг 1: Скачать PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista — Microsoft Gold Certified).
• Шаг 2: Нажмите «Начать сканирование”, Чтобы найти проблемы реестра Windows, которые могут вызывать проблемы с ПК.
• Шаг 3: Нажмите «Починить все», Чтобы исправить все проблемы.

Проверьте, достаточно ли места для моментального снимка на одном из томов.
vssadmin список shadowstorage
Настройте другой том для хранения снимка для этого тома:
vssadmin изменить размер shadowstorage / for =? / О =? / MAXSIZE = неограничена
Замените «?» На предполагаемый объем
Ex. vssadmin resize shadowstorage / for = C: / on = D: / maxsize = UNBOUNDED

Новая регистрация компонентов VSS

Скопируйте и вставьте следующие строки в пакетный файл DOS (.bat) и запустите его:

кд / д% windir% system32
чистый стоп vss
чистый стоп swprv
regsvr32 / s ole32.dll
regsvr32 / s oleaut32.dll
regsvr32 / s vss_ps.dll
vssvc / регистрация
regsvr32 / s / i swprv.dll
regsvr32 / s / i eventcls.dll
regsvr32 / s es.dll
regsvr32 / s stdprov.dll
regsvr32 / s vssui.dll
regsvr32 / s msxml.dll
regsvr32 / s msxml3.dll
regsvr32 / s msxml4.dll
vssvc / регистрация
чистый старт swprv
чистый старт vss

Run Chkdsk

Попробуйте запустить ChkDsk, чтобы проверить жесткий диск на наличие ошибок, которые могут вызвать это Ошибка восстановления системы, Щелкните правой кнопкой мыши на считывателе / ​​свойства / инструменты / проверка ошибок / значок проверки. Он немедленно сообщит вам, если есть какие-либо проблемы с вашим жестким диском. Если он говорит, что есть ошибки, тогда запустите анализ, отметив оба поля и chkdsk, чтобы исправить их.

CCNA, веб-разработчик, ПК для устранения неполадок

Я компьютерный энтузиаст и практикующий ИТ-специалист. У меня за плечами многолетний опыт работы в области компьютерного программирования, устранения неисправностей и ремонта оборудования. Я специализируюсь на веб-разработке и дизайне баз данных. У меня также есть сертификат CCNA для проектирования сетей и устранения неполадок.

Источник

0x80042306 error occurs when configuring shadow copies for clustered mount points on another drive in Windows Server 2012

This article helps fix the error 0x80042306 that occurs when you configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume.

Original product version: Windows Server 2012 R2
Original KB number: 2828270

Symptoms

When trying to configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume, it may fail. Additionally, you may receive the following error message:

Failed to create the storage area association.
Error 0x80042306: The shadow copy provider had an error.

Other symptoms you might observe when trying to configure previous versions for a mount point on another volume:

• Cluster Disk goes offline
• You may receive the following event logged for VSS:

Cause

The error occurs because of mismatch in cluster online and offline timeouts. There’s a premature exit after calling resource online/offline.

Workaround

To work around this problem, consider modifying the registry values by following the steps mentioned below.

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

On the Start screen, click the Search tile.

Type regedit in the Search window and then double-click regedit.exe.

Locate the following registry entry: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesVSSSettings

Right-click ClusterOfflineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Right-click ClusterOnlineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Exit Registry Editor, and then restart the computer.

Note: The Decimal value can be increased as per requirement.

Источник

Recently, a few users encounter Error 0x80042306 while creating System Restore Point on their PCs. Today, in this blog post, we discuss the reasons and probable solutions to fix this trouble. This bug arises primarily after a failed update, malfunctioning Volume shadow copy service, and VSS components.

Error 0x80042306 may also occur when there are bad sectors on HDD or corrupt system files. Restart/ re-register VSS, Repair missing system files, Check health of HDD, Restart Volume shadow copy service may resolve this issue. If this bug still stays on your PC, try renaming system restore files may help to troubleshoot this error. Let’s explore the solutions in detail-

1. Restart Volume shadow copy service
2. Re-register VSS components
3. Run Chkdsk command
4. Perform System File Checker command
5. Rename system restore file
6. Change System Restore Space Usage

RECOMMENDED: Four different ways to use System Restore in Windows 10

Methods to solve System Restore point error 0x80042306

Here, we depict several ways to encounter this System Restore point error 0x80042306 on Windows 10 PC. They are-

1] Restart Volume shadow copy service

In case, Volume shadow copy service starts malfunctioning, this may arise error 0x80042306 while creating a restore point. To fix this bug, restart this service by following these simple steps-

Note: To perform this task, make sure you have logged in with an administrator account.

Step-1: Right-click on the Start and choose Run from the Power Menu.

Step-2: In the text box, type services.msc then press OK to launch Windows Services.

Step-3: When the page appears, reach out to the Volume Shadow Copy and right-click on the same.

Step-4: Now, select the Properties option on the context menu.

Step-5: If the services are not running, tap the Start option otherwise Stop and Restart it.

Step-6: Under Startup type, change its value to Automatic.

Step-7: Once you complete the above steps, Restart your system and try creating a restore point again.

I Hope, you can now do this without receiving error 0x80042306.

2] Re-register VSS components

The Volume Shadow Copy Service (VSS) is a useful service to accommodate data servers, backup applications, and storage management of your system. But any improper operation of this service leads to error 0x80042306 while Creating the Restore point. To manage this bug you need to re-registered this application just following the below easy steps-

• Right-click anywhere on the desktop and hover the mouse over New thereafter select Text Document.
• Now, opens this text document and copy/paste the following set of command lines inside.

cd /d %windir%system32
net stop vss 
net stop swprv 
regsvr32 /s ole32.dll 
regsvr32 /s oleaut32.dll 
regsvr32 /s vss_ps.dll 
vssvc /register 
regsvr32 /s /i swprv.dll 
regsvr32 /s /i eventcls.dll 
regsvr32 /s es.dll 
regsvr32 /s stdprov.dll 
regsvr32 /s vssui.dll 
regsvr32 /s msxml.dll 
regsvr32 /s msxml3.dll 
regsvr32 /s msxml4.dll 
vssvc /register 
net start swprv 
net start vss

• Succeeding after, save this file as .bat extension under Save as type: drop-down menu.
• Make a right-click again on this file and choose Run as Administrator.

This will re-register the Volume Shadow Copy Service on your system.

3] Run Chkdsk command

If some of the sectors have become corrupt on HDD may also arise this Error 0x80042306. To make sure what’s the fact, try executing the DISM command on your PC. This will scan the whole hard drive and repair the same if minor bugs exist. Here are the steps to proceed with-

• Type cmd in the search box then do the right click on Command Prompt option.
• Henceforth, choose Run as administrator from the context menu.
• If there appears a UAC, tap Yes.
• Type or copy/paste the following code near the blinking cursor to detect the problem.

chkdsk C: /f /r /x

Note: The parameter C: indicates the drive that keeps the OS file, f directs to fix the problem. Similarly, r is there to find out the bug and x starts the scanning process.

• If your system is a little busy, this displays a message to reschedule this task when the PC reboots.
• Press Y to give your permission.

Lastly, Restart the computer again and check if this issue gets solved or not.

4] Perform System File Checker command

Sometimes, the bug lies in the core system files. If that’s the case, try executing “sfc/scannow” command line on your PC. This may resolve this Create Restore point error 0x80042306 issue. The steps are quite easy to follow-

• At first, right-click on the windows icon and choose Run from the pop-up menu.
• In the text area, type cmd and simultaneously press Ctrl+Shift+Enter to begin command Prompt as Administrator.
• If the UAC Screen prompts, click Yes.
• Now, type sfc /scannow near the blinking cursor followed by the Enter key.

• This whole scanning and repairing will take approx. 10 minutes, so wait accordingly.
• Once over, Reboot your PC and sign-into your System.

5] Rename system restore file

If you still experience error 0x80042306 while creating a restore point, renaming this file may help to sort out this issue. Here’s how to proceed-

• Press Win-logo and R together to open the Run dialog.
• In the void box, write the following command then hit Enter at the end.

%windir%System32TasksMicrosoftWindowsSystemRestore.

• Thereupon, locate the directory SR and rename it to SR.sav.

• After you rename this file, Restart your PC to see whether it actually solves the trouble or not.

6] Change System Restore Space Usage

The best way to change the disk space used by System Restore is through Windows itself. Strangely, the option to change the maximum available space was present in Windows XP, then was removed in Vista, but put back again from Windows 7 onward. Here are the steps-

• Go to Search and type systempropertiesprotection in the void area then click on the same option.
• Once a new window appears, jointly press the Win and Pause/Break key.
• Again from the left column, tap the System protection link.
• Switch back to the C: drive and hit the Configure button.

• Henceforth, enable the Turn on system Protection radio button.

• Scroll the slider and set the space percentage that you want to use on the selected disk drive in either GB/MB.
• At last, tap OK to confirm the changes made so far.

Note: There exists a counter that displays the current Usage of space. In case, you set the new disk space lower than the current one, this will delete some of the files of earlier Restore points so as to accommodate as per the newly assigned disk space.

0x80042306 error occurs when configuring shadow copies for clustered mount points on another drive in Windows Server 2012

This article helps fix the error 0x80042306 that occurs when you configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume.

Original product version: Windows Server 2012 R2
Original KB number: 2828270

Symptoms

When trying to configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume, it may fail. Additionally, you may receive the following error message:

Failed to create the storage area association.
Error 0x80042306: The shadow copy provider had an error.

Other symptoms you might observe when trying to configure previous versions for a mount point on another volume:

• Cluster Disk goes offline
• You may receive the following event logged for VSS:

Cause

The error occurs because of mismatch in cluster online and offline timeouts. There’s a premature exit after calling resource online/offline.

Workaround

To work around this problem, consider modifying the registry values by following the steps mentioned below.

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

On the Start screen, click the Search tile.

Type regedit in the Search window and then double-click regedit.exe.

Locate the following registry entry: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesVSSSettings

Right-click ClusterOfflineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Right-click ClusterOnlineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Exit Registry Editor, and then restart the computer.

Note: The Decimal value can be increased as per requirement.

Источник

Как исправить: Не удается создать ошибку точки восстановления 0X80042306

При попытке создать точку восстановления вы получаете сообщение защиты системы с кодом ошибки 0X80042306, указывающее, что точка восстановления не может быть создана.

Причина: «У поставщика теневого копирования произошла ошибка. Проверьте журналы событий системы и приложений для получения дополнительной информации. (0x80042306)»

Эта ошибка также может возникнуть, если служба теневого копирования томов остановлена. Это происходит, когда служба теневого копирования томов (VSS) не может работать из-за установки в системе другого поставщика управления снимками.

Очистить громкость

Объем должен быть очищен.

vssadmin удалить тени / для = удалить тени

vssadmin удалить тени / for =

Обновить:

Теперь мы рекомендуем использовать этот инструмент для вашей ошибки. Кроме того, этот инструмент исправляет распространенные компьютерные ошибки, защищает вас от потери файлов, вредоносных программ, сбоев оборудования и оптимизирует ваш компьютер для максимальной производительности. Вы можете быстро исправить проблемы с вашим ПК и предотвратить появление других программ с этим программным обеспечением:

• Шаг 1: Скачать PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista — Microsoft Gold Certified).
• Шаг 2: Нажмите «Начать сканирование”, Чтобы найти проблемы реестра Windows, которые могут вызывать проблемы с ПК.
• Шаг 3: Нажмите «Починить все», Чтобы исправить все проблемы.

Проверьте, достаточно ли места для моментального снимка на одном из томов.
vssadmin список shadowstorage
Настройте другой том для хранения снимка для этого тома:
vssadmin изменить размер shadowstorage / for =? / О =? / MAXSIZE = неограничена
Замените «?» На предполагаемый объем
Ex. vssadmin resize shadowstorage / for = C: / on = D: / maxsize = UNBOUNDED

Новая регистрация компонентов VSS

Скопируйте и вставьте следующие строки в пакетный файл DOS (.bat) и запустите его:

кд / д% windir% system32
чистый стоп vss
чистый стоп swprv
regsvr32 / s ole32.dll
regsvr32 / s oleaut32.dll
regsvr32 / s vss_ps.dll
vssvc / регистрация
regsvr32 / s / i swprv.dll
regsvr32 / s / i eventcls.dll
regsvr32 / s es.dll
regsvr32 / s stdprov.dll
regsvr32 / s vssui.dll
regsvr32 / s msxml.dll
regsvr32 / s msxml3.dll
regsvr32 / s msxml4.dll
vssvc / регистрация
чистый старт swprv
чистый старт vss

Run Chkdsk

Попробуйте запустить ChkDsk, чтобы проверить жесткий диск на наличие ошибок, которые могут вызвать это Ошибка восстановления системы, Щелкните правой кнопкой мыши на считывателе / ​​свойства / инструменты / проверка ошибок / значок проверки. Он немедленно сообщит вам, если есть какие-либо проблемы с вашим жестким диском. Если он говорит, что есть ошибки, тогда запустите анализ, отметив оба поля и chkdsk, чтобы исправить их.

CCNA, веб-разработчик, ПК для устранения неполадок

Я компьютерный энтузиаст и практикующий ИТ-специалист. У меня за плечами многолетний опыт работы в области компьютерного программирования, устранения неисправностей и ремонта оборудования. Я специализируюсь на веб-разработке и дизайне баз данных. У меня также есть сертификат CCNA для проектирования сетей и устранения неполадок.

Источник

0x80042306 error occurs when configuring shadow copies for clustered mount points on another drive in Windows Server 2012

This article helps fix the error 0x80042306 that occurs when you configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume.

Original product version: Windows Server 2012 R2
Original KB number: 2828270

Symptoms

When trying to configure Previous Versions in Windows Server 2012 for the clustered disks that are mounted as folders on a different volume, it may fail. Additionally, you may receive the following error message:

Failed to create the storage area association.
Error 0x80042306: The shadow copy provider had an error.

Other symptoms you might observe when trying to configure previous versions for a mount point on another volume:

• Cluster Disk goes offline
• You may receive the following event logged for VSS:

Cause

The error occurs because of mismatch in cluster online and offline timeouts. There’s a premature exit after calling resource online/offline.

Workaround

To work around this problem, consider modifying the registry values by following the steps mentioned below.

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

On the Start screen, click the Search tile.

Type regedit in the Search window and then double-click regedit.exe.

Locate the following registry entry: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesVSSSettings

Right-click ClusterOfflineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Right-click ClusterOnlineTimeout, and then click Modify.

Select Decimal and then type 2000000000 in the Value data box, and then click OK.

Exit Registry Editor, and then restart the computer.

Note: The Decimal value can be increased as per requirement.

Источник