Ошибка при установке python 0x80070642

Whenever I try to install Python 3.6.3 (32-bit) to my Windows 7 laptop at work, the installer fails with the following error.

0x80070642 — User cancelled installation

This error consistently occurs half-way through the installation while installing «Python 3.6.3 Standard Library (32-bit)», as indicated by Python’s progress bar turning red in the taskbar icon.

Looking at the installer log, I noticed a few entries which report Failed to secure cache path:, but searching these errors hasn’t provided any additional details.

Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

Источник

Whenever I try to install Python 3.6.3 (32-bit) to my Windows 7 laptop at work, the installer fails with the following error.

0x80070642 — User cancelled installation

This error consistently occurs half-way through the installation while installing «Python 3.6.3 Standard Library (32-bit)», as indicated by Python’s progress bar turning red in the taskbar icon.

Looking at the installer log, I noticed a few entries which report Failed to secure cache path:, but searching these errors hasn’t provided any additional details.

Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

Всякий раз, когда я пытаюсь установить Python 3.6.3 (32-разрядный) на свой ноутбук под управлением Windows 7, программа установки не работает со следующей ошибкой.

0x80070642 — Отменена пользователем установка

Эта ошибка последовательно возникает на полпути через установку при установке «Стандартная библиотека Python 3.6.3 (32-разрядная версия)», о чем свидетельствует индикатор выполнения Python, красный цвет которого отображается на значке панели задач.

Глядя на журнал установщика, я заметил несколько записей, в которых сообщается о том, что не Failed to secure cache path: но поиск этих ошибок не предоставил никаких дополнительных сведений.

Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

Stevoisiak
Опубликовано в
Dev

Stevoisiak

Всякий раз, когда я пытаюсь установить Python 3.6.3 (32-разрядный) на свой ноутбук с Windows 7 на работе, установщик выдает следующую ошибку.

0x80070642 — Пользователь отменил установку

Эта ошибка постоянно возникает на полпути установки при установке «стандартной библиотеки Python 3.6.3 (32-разрядная версия)», на что указывает красный индикатор выполнения Python на значке панели задач.

Просматривая журнал установщика , я заметил несколько записей, которые сообщают Failed to secure cache path:, но поиск этих ошибок не дал никаких дополнительных сведений.

Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

Stevoisiak

Мне удалось устранить ошибку, сняв флажок « Установить средство запуска для всех пользователей ».

После снятия флажка установщик работал должным образом без каких-либо проблем.

Установщик со снятым флажком "Установить программу запуска для всех пользователей"

Эта статья взята из Интернета, укажите источник при перепечатке.

Если есть какие-либо нарушения, пожалуйста, свяжитесь с[email protected] Удалить.

Отредактировано в2020-11-17

Статьи по теме

Должен ли я использовать ‘not x’ или ‘x == 0’, чтобы проверить, равен ли результат операции по модулю нулю в python

Элегантный способ увеличить x, если x <0, и уменьшить x, если x> 0 в Python?

кризис идентичности python, почему l или x копируют 0, а не создают новый 0

Когда я округляю x в python, он возвращает 0,0

Ось x графика Python перевернута, как показать от 0 до n?

Замените « x» на «0x» в тексте, используя Python

Что означает x [x <2] = 0 в Python?

Почему Python возвращает комплексное число для операции x ** x, если -1 <x <0?

как можно отображать шестнадцатеричные данные на терминале, например x0AA, с помощью python

Как использовать hex () без 0x в Python?

Как заставить Python принимать символ юникода 0x2000 (и другие)

Как я могу получить значение объекта <property в 0x …> в Python

Python / Pandas — установка минимального значения y как 0, когда значения x являются «диапазоном», а не целыми числами.

Python / Pandas — установка минимального значения y как 0, когда значения x являются «диапазоном», а не целыми числами.

Python — как выполнить цикл для массива не из 0-го, а из x-го элемента?

Журнал Python застрял на определенном байте — 0x90

Python для преобразования специальных символов Юникода (например, ♡) в их шестнадцатеричные литералы в строке (например, 0x2661)

Вывод Python <function at 0x>

Python для преобразования специальных символов Юникода (например, ♡) в их шестнадцатеричные литералы в строке (например, 0x2661)

Установка границ определенного подмножества массива x0 scipy python

создать фрейм панды формы (x ** 0,5, x ** 0,5) из массива размером x python

Как сделать так, чтобы ось x проходила через (0,0) с помощью matplotlib в Python?

Python MatplotLib строит ось x с первым значением оси x, помеченным как 1 (вместо 0)

Каков эффект добавления индекса при использовании range (len (x)) в цикле for в Python? например, диапазон (len (x [0])

Подсчет от 0 до X возможен, подсчет от 1 до x дает ошибку ‘IndexError: индекс назначения списка вне диапазона’ python

логический сдвиг вправо в python — значение выражения (num% 0x100000000) >> 1

Python CSV удаляет новые строки, обозначенные & # x0D

Как сместить точку пересечения осей x и y с 0 на 1 с помощью Python Altair?

Python <__ main __. Class объект в 0x107857490>

Источник

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and
privacy statement. We’ll occasionally send you account related emails.

Already on GitHub?
Sign in
to your account

Closed

GarethMoger mannequin opened this issue

Oct 26, 2017

· 2 comments

Comments

@GarethMoger

BPO 31875
Nosy @pfmoore, @tjguk, @zware, @zooba
PRs
  • bpo-31975 (PEP 565): Show DeprecationWarning in __main__ #4458
    		•
    Files
  • Python 3.6.1 (32-bit)_20171026151143.log: Installation log
  • Python 3.6.1 (32-bit)_20171026151143.log: Install log
    		•

    Note: these values reflect the state of the issue at the time it was migrated and might not reflect the current state.

    Show more details

    GitHub fields:

    assignee = None
closed_at = <Date 2021-10-19.22:44:16.526>
created_at = <Date 2017-10-26.14:16:27.789>
labels = ['OS-windows']
title = 'Error 0x80070642: Failed to install MSI package.'
updated_at = <Date 2021-10-19.22:44:16.525>
user = 'https://bugs.python.org/GarethMoger'

    bugs.python.org fields:

    activity = <Date 2021-10-19.22:44:16.525>
actor = 'steve.dower'
assignee = 'none'
closed = True
closed_date = <Date 2021-10-19.22:44:16.526>
closer = 'steve.dower'
components = ['Windows']
creation = <Date 2017-10-26.14:16:27.789>
creator = 'Gareth Moger'
dependencies = []
files = ['47240', '47241']
hgrepos = []
issue_num = 31875
keywords = ['patch']
message_count = 2.0
messages = ['305058', '404370']
nosy_count = 5.0
nosy_names = ['paul.moore', 'tim.golden', 'zach.ware', 'steve.dower', 'Gareth Moger']
pr_nums = ['4458']
priority = 'normal'
resolution = 'out of date'
stage = 'resolved'
status = 'closed'
superseder = None
type = None
url = 'https://bugs.python.org/issue31875'
versions = ['Python 3.6']

    @GarethMoger



    Copy link


    Mannequin


    Author

    I had my work computer re-imaged this week but Python 3.6.1 is gone and I am unable to install.

    I have tried to completely remove it with CCleaner and any other references I found but it still will not install. I am installing the same version as before.

    Following the advice from another post, I installed on another machine and then copied the folder onto my work machine but was unable to uninstall/repair as described.

    Attached is the log file.

    @zooba

    We’d also need the other log files from %TEMP% in this case, but I suspect we’re not going to get them now.

    The associated PR is not related to this bug.

    2 participants

    @iritkatriel

    @zooba

    Источник

    Всякий раз, когда я пытаюсь установить Python 3.6.3 (32-разрядный) на свой ноутбук под управлением Windows 7, программа установки не работает со следующей ошибкой.

    0x80070642 — Отменена пользователем установка

    Эта ошибка последовательно возникает на полпути через установку при установке «Стандартная библиотека Python 3.6.3 (32-разрядная версия)», о чем свидетельствует индикатор выполнения Python, красный цвет которого отображается на значке панели задач.

    Глядя на журнал установщика, я заметил несколько записей, в которых сообщается о том, что не Failed to secure cache path: но поиск этих ошибок не предоставил никаких дополнительных сведений.

    Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
    Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
    Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
    Error 0x80070005: Failed to cache payload: launcher_AllUsers
    Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

    Источник

    Whenever I try to install Python 3.6.3 (32-bit) to my Windows 7 laptop at work, the installer fails with the following error.

    0x80070642 – User cancelled installation

    This error consistently occurs half-way through the installation while installing «Python 3.6.3 Standard Library (32-bit)», as indicated by Python’s progress bar turning red in the taskbar icon.

    Looking at the installer log, I noticed a few entries which report Failed to secure cache path:, but searching these errors hasn’t provided any additional details.

    Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

    Источник

    I was able to resolve the error by unchecking ‘Install launcher for all users‘. Once unchecked, the installer worked as expected without any issue.

    Installer with "install launcher for all users" unchecked

    Presumably there was an issue with folder permissions, since this was on a managed work machine.

    Comments

    • Whenever I try to install Python 3.6.3 (32-bit) to my Windows 7 laptop at work, the installer fails with the following error.

      0x80070642 — User cancelled installation

      This error consistently occurs half-way through the installation while installing «Python 3.6.3 Standard Library (32-bit)», as indicated by Python’s progress bar turning red in the taskbar icon.

      Looking at the installer log, I noticed a few entries which report Failed to secure cache path:, but searching these errors hasn’t provided any additional details.

      Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

    • You are awesome. Thank you so much, I’ve been trying to do this installation on my workstation for 20 work hours! thanks!

    • The above answer did not work for me. I right clicked the setup and run it as administrator and then it worked!

    Recents

    Источник

    Issue31875

    Created on 2017-10-26 14:16 by Gareth Moger, last changed 2022-04-11 14:58 by admin. This issue is now closed.

    Files
    File name Uploaded Description Edit
    Python 3.6.1 (32-bit)_20171026151143.log Gareth Moger,
    2017-10-26 14:16     		Installation log
    Python 3.6.1 (32-bit)_20171026151143.log Gareth Moger,
    2017-10-26 14:18     		Install log
    Pull Requests
    URL Status Linked Edit
    PR 4458 open ncoghlan,
    2017-11-19 05:57
    Messages (2)
    msg305058 — (view) Author: Gareth Moger (Gareth Moger) Date: 2017-10-26 14:16 
    I had my work computer re-imaged this week but Python 3.6.1 is gone and I am unable to install.

I have tried to completely remove it with CCleaner and any other references I found but it still will not install.  I am installing the same version as before.

Following the advice from another post, I installed on another machine and then copied the folder onto my work machine but was unable to uninstall/repair as described.

Attached is the log file.
    msg404370 — (view) Author: Steve Dower (steve.dower) * (Python committer) Date: 2021-10-19 22:44 
    We'd also need the other log files from %TEMP% in this case, but I suspect we're not going to get them now.

The associated PR is not related to this bug.
    History
    Date User Action Args
    2022-04-11 14:58:53 admin set github: 76056
    2021-10-19 22:44:16 steve.dower set status: open -> closed
    resolution: out of date
    messages:
    + msg404370

    stage: patch review -> resolved
    2021-10-19 22:32:05 iritkatriel set nosy:
    + paul.moore, tim.golden, zach.ware, steve.dower
    components:
    + Windows, — Installation
    2017-11-19 05:57:56 ncoghlan set keywords:
    + patch
    stage: patch review
    pull_requests:
    + pull_request4395
    2017-10-26 14:18:56 Gareth Moger set files:
    + Python 3.6.1 (32-bit)_20171026151143.log
    2017-10-26 14:16:27 Gareth Moger create
    Источник

    Whenever I try to install Python 3.6.3 (32-bit) to my Windows 7 laptop at work, the installer fails with the following error.

    0x80070642 — User cancelled installation

    This error consistently occurs half-way through the installation while installing «Python 3.6.3 Standard Library (32-bit)», as indicated by Python’s progress bar turning red in the taskbar icon.

    Looking at the installer log, I noticed a few entries which report Failed to secure cache path:, but searching these errors hasn’t provided any additional details.

    Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

    Hello,

    I am trying to install Visual C++ Redistributable for Visual Studio 2015 from the following link so that I can run the
    Gog Galaxy Client. 

       https://www.microsoft.com/en-au/download/details.aspx?id=48145

    But installation stops on the end and says «Processing: Windows81_64». When I try to run Gog Galaxy it doesn’t work, because of (0xc000007b). (I have polish version of Windows, so I cant paste exactly what it says, but it’s something like
    «the application was unable to start correctly 0xc000007b»)

    The log file: 

    [1554:0594][2017-02-18T19:28:30]i001: Burn v3.7.3813.0, Windows v6.3 (Build 9600: Service Pack 0), path: C:UsersUserDownloadsvc_redist.x64.exe, cmdline: »
    [1554:0594][2017-02-18T19:28:30]i000: Setting string variable ‘WixBundleLog’ to value ‘C:UsersUserAppDataLocalTempdd_vcredist_amd64_20170218192830.log’
    [1554:0594][2017-02-18T19:28:30]i000: Setting string variable ‘WixBundleOriginalSource’ to value ‘C:UsersUserDownloadsvc_redist.x64.exe’
    [1554:0594][2017-02-18T19:28:30]i000: Setting string variable ‘WixBundleOriginalSourceFolder’ to value ‘C:UsersUserDownloads’
    [1554:0594][2017-02-18T19:28:30]i000: Setting string variable ‘WixBundleName’ to value ‘Microsoft Visual C++ 2015 Redistributable (x64) — 14.0.23026’
    [1554:0594][2017-02-18T19:28:30]i100: Detect begin, 10 packages
    [1554:0594][2017-02-18T19:28:30]i000: Setting version variable ‘windows_uCRT_DetectKey’ to value ‘10.0.10046.0’
    [1554:0594][2017-02-18T19:28:30]i000: Setting numeric variable ‘windows_uCRT_DetectKeyExists’ to value 1
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘(windows_uCRT_DetectKeyExists AND windows_uCRT_DetectKey >= v10.0.10137.0)’ evaluates to false.
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: vcRuntimeMinimum_x64, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: vcRuntimeAdditional_x64, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: Windows81_x86, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: Windows81_x64, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: Windows8_x86, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: Windows8_x64, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: Windows7_MSU_x86, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: Windows7_MSU_x64, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: WindowsVista_MSU_x86, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i101: Detected package: WindowsVista_MSU_x64, state: Absent, cached: None
    [1554:0594][2017-02-18T19:28:30]i052: Condition ‘VersionNT64 >= v6.0 OR (VersionNT64 = v5.2 AND ServicePackLevel >= 1)’ evaluates to true.
    [1554:0594][2017-02-18T19:28:30]i199: Detect complete, result: 0x0
    [1554:0594][2017-02-18T19:28:32]i200: Plan begin, 10 packages, action: Install
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘(VersionNT64)’ evaluates to true.
    [1554:0594][2017-02-18T19:28:32]i000: Setting string variable ‘WixBundleRollbackLog_vcRuntimeMinimum_x64’ to value ‘C:UsersUserAppDataLocalTempdd_vcredist_amd64_20170218192830_000_vcRuntimeMinimum_x64_rollback.log’
    [1554:0594][2017-02-18T19:28:32]i000: Setting string variable ‘WixBundleLog_vcRuntimeMinimum_x64’ to value ‘C:UsersUserAppDataLocalTempdd_vcredist_amd64_20170218192830_000_vcRuntimeMinimum_x64.log’
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘(VersionNT64)’ evaluates to true.
    [1554:0594][2017-02-18T19:28:32]i000: Setting string variable ‘WixBundleRollbackLog_vcRuntimeAdditional_x64’ to value ‘C:UsersUserAppDataLocalTempdd_vcredist_amd64_20170218192830_001_vcRuntimeAdditional_x64_rollback.log’
    [1554:0594][2017-02-18T19:28:32]i000: Setting string variable ‘WixBundleLog_vcRuntimeAdditional_x64’ to value ‘C:UsersUserAppDataLocalTempdd_vcredist_amd64_20170218192830_001_vcRuntimeAdditional_x64.log’
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.3 AND NOT VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: Windows81_x86
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.3 AND VersionNT64’ evaluates to true.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: Windows81_x64
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.2 AND NOT VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: Windows8_x86
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.2 AND VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: Windows8_x64
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.1 AND NOT VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: Windows7_MSU_x86
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.1 AND VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: Windows7_MSU_x64
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.0 AND NOT VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: WindowsVista_MSU_x86
    [1554:0594][2017-02-18T19:28:32]i052: Condition ‘VersionNT = v6.0 AND VersionNT64’ evaluates to false.
    [1554:0594][2017-02-18T19:28:32]w321: Skipping dependency registration on package with no dependency providers: WindowsVista_MSU_x64
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: vcRuntimeMinimum_x64, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall,
    cache: Yes, uncache: No, dependency: Register
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: vcRuntimeAdditional_x64, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback:
    Uninstall, cache: Yes, uncache: No, dependency: Register
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: Windows81_x86, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache:
    No, uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: Windows81_x64, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall,
    cache: Yes, uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: Windows8_x86, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache: No,
    uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: Windows8_x64, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache: No,
    uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: Windows7_MSU_x86, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache:
    No, uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: Windows7_MSU_x64, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None, cache:
    No, uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: WindowsVista_MSU_x86, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None,
    cache: No, uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i201: Planned package: WindowsVista_MSU_x64, state: Absent, default requested: Absent, ba requested: Absent, execute: None, rollback: None,
    cache: No, uncache: No, dependency: None
    [1554:0594][2017-02-18T19:28:32]i299: Plan complete, result: 0x0
    [1554:0594][2017-02-18T19:28:32]i300: Apply begin
    [0CA0:0D98][2017-02-18T19:28:34]i360: Creating a system restore point.
    [0CA0:0D98][2017-02-18T19:28:34]i361: Created a system restore point.
    [0CA0:0D98][2017-02-18T19:28:34]i370: Session begin, registration key: SOFTWAREMicrosoftWindowsCurrentVersionUninstall{e46eca4f-393b-40df-9f49-076faf788d83}, options:
    0x7, disable resume: No
    [0CA0:0D98][2017-02-18T19:28:34]i000: Caching bundle from: ‘C:UsersUserAppDataLocalTemp{e46eca4f-393b-40df-9f49-076faf788d83}.beVC_redist.x64.exe’ to: ‘C:ProgramDataPackage
    Cache{e46eca4f-393b-40df-9f49-076faf788d83}VC_redist.x64.exe’
    [0CA0:0D98][2017-02-18T19:28:34]i320: Registering bundle dependency provider: {e46eca4f-393b-40df-9f49-076faf788d83}, version: 14.0.23026.0
    [0CA0:0D98][2017-02-18T19:28:34]i371: Updating session, registration key: SOFTWAREMicrosoftWindowsCurrentVersionUninstall{e46eca4f-393b-40df-9f49-076faf788d83}, resume:
    Active, restart initiated: No, disable resume: No
    [0CA0:0980][2017-02-18T19:28:34]i304: Verified existing payload: vcRuntimeMinimum_x64 at path: C:ProgramDataPackage Cache.unverifiedvcRuntimeMinimum_x64.
    [0CA0:0980][2017-02-18T19:28:34]i305: Verified acquired payload: vcRuntimeMinimum_x64 at path: C:ProgramDataPackage Cache.unverifiedvcRuntimeMinimum_x64, moving to: C:ProgramDataPackage
    Cache{0D3E9E15-DE7A-300B-96F1-B4AF12B96488}v14.0.23026packagesvcRuntimeMinimum_amd64vc_runtimeMinimum_x64.msi.
    [0CA0:0980][2017-02-18T19:28:34]i304: Verified existing payload: cab5046A8AB272BF37297BB7928664C9503 at path: C:ProgramDataPackage Cache.unverifiedcab5046A8AB272BF37297BB7928664C9503.
    [0CA0:0980][2017-02-18T19:28:34]i305: Verified acquired payload: cab5046A8AB272BF37297BB7928664C9503 at path: C:ProgramDataPackage Cache.unverifiedcab5046A8AB272BF37297BB7928664C9503,
    moving to: C:ProgramDataPackage Cache{0D3E9E15-DE7A-300B-96F1-B4AF12B96488}v14.0.23026packagesvcRuntimeMinimum_amd64cab1.cab.
    [0CA0:0980][2017-02-18T19:28:34]i304: Verified existing payload: vcRuntimeAdditional_x64 at path: C:ProgramDataPackage Cache.unverifiedvcRuntimeAdditional_x64.
    [0CA0:0980][2017-02-18T19:28:34]i305: Verified acquired payload: vcRuntimeAdditional_x64 at path: C:ProgramDataPackage Cache.unverifiedvcRuntimeAdditional_x64, moving to:
    C:ProgramDataPackage Cache{BC958BD2-5DAC-3862-BB1A-C1BE0790438D}v14.0.23026packagesvcRuntimeAdditional_amd64vc_runtimeAdditional_x64.msi.
    [0CA0:0980][2017-02-18T19:28:34]i304: Verified existing payload: cab2C04DDC374BD96EB5C8EB8208F2C7C92 at path: C:ProgramDataPackage Cache.unverifiedcab2C04DDC374BD96EB5C8EB8208F2C7C92.
    [0CA0:0980][2017-02-18T19:28:34]i305: Verified acquired payload: cab2C04DDC374BD96EB5C8EB8208F2C7C92 at path: C:ProgramDataPackage Cache.unverifiedcab2C04DDC374BD96EB5C8EB8208F2C7C92,
    moving to: C:ProgramDataPackage Cache{BC958BD2-5DAC-3862-BB1A-C1BE0790438D}v14.0.23026packagesvcRuntimeAdditional_amd64cab1.cab.
    [0CA0:0980][2017-02-18T19:28:34]i304: Verified existing payload: Windows81_x64 at path: C:ProgramDataPackage Cache.unverifiedWindows81_x64.
    [0CA0:0980][2017-02-18T19:28:34]i305: Verified acquired payload: Windows81_x64 at path: C:ProgramDataPackage Cache.unverifiedWindows81_x64, moving to: C:ProgramDataPackage
    CacheFC6260C33678BB17FB8B88536C476B4015B7C5E9packagesPatchx64Windows8.1-KB2999226-x64.msu.
    [0CA0:0D98][2017-02-18T19:28:34]i301: Applying execute package: vcRuntimeMinimum_x64, action: Install, path: C:ProgramDataPackage Cache{0D3E9E15-DE7A-300B-96F1-B4AF12B96488}v14.0.23026packagesvcRuntimeMinimum_amd64vc_runtimeMinimum_x64.msi,
    arguments: ‘ MSIFASTINSTALL=»7″ NOVSUI=»1″‘
    [1554:0594][2017-02-18T19:28:35]i319: Applied execute package: vcRuntimeMinimum_x64, result: 0x0, restart: None
    [0CA0:0D98][2017-02-18T19:28:35]i325: Registering dependency: {e46eca4f-393b-40df-9f49-076faf788d83} on package provider: Microsoft.VS.VC_RuntimeMinimumVSU_amd64,v14, package:
    vcRuntimeMinimum_x64
    [0CA0:0D98][2017-02-18T19:28:35]i301: Applying execute package: vcRuntimeAdditional_x64, action: Install, path: C:ProgramDataPackage Cache{BC958BD2-5DAC-3862-BB1A-C1BE0790438D}v14.0.23026packagesvcRuntimeAdditional_amd64vc_runtimeAdditional_x64.msi,
    arguments: ‘ MSIFASTINSTALL=»7″ NOVSUI=»1″‘
    [1554:0594][2017-02-18T19:28:36]i319: Applied execute package: vcRuntimeAdditional_x64, result: 0x0, restart: None
    [0CA0:0D98][2017-02-18T19:28:36]i325: Registering dependency: {e46eca4f-393b-40df-9f49-076faf788d83} on package provider: Microsoft.VS.VC_RuntimeAdditionalVSU_amd64,v14, package:
    vcRuntimeAdditional_x64
    [0CA0:0D98][2017-02-18T19:28:36]i301: Applying execute package: Windows81_x64, action: Install, path: C:ProgramDataPackage CacheFC6260C33678BB17FB8B88536C476B4015B7C5E9packagesPatchx64Windows8.1-KB2999226-x64.msu,
    arguments: ‘»C:WindowsSysNativewusa.exe» «C:ProgramDataPackage CacheFC6260C33678BB17FB8B88536C476B4015B7C5E9packagesPatchx64Windows8.1-KB2999226-x64.msu» /quiet /norestart’
    [0CA0:0D98][2017-02-18T19:28:36]e000: Error 0x80070652: Failed to execute MSU package.
    [1554:0594][2017-02-18T19:28:36]e000: Error 0x80070652: Failed to configure per-machine MSU package.
    [1554:0594][2017-02-18T19:28:36]w348: Application requested retry of package: Windows81_x64, encountered error: 0x80070652. Retrying…
    [0CA0:0D98][2017-02-18T19:28:39]i301: Applying execute package: Windows81_x64, action: Install, path: C:ProgramDataPackage CacheFC6260C33678BB17FB8B88536C476B4015B7C5E9packagesPatchx64Windows8.1-KB2999226-x64.msu,
    arguments: ‘»C:WindowsSysNativewusa.exe» «C:ProgramDataPackage CacheFC6260C33678BB17FB8B88536C476B4015B7C5E9packagesPatchx64Windows8.1-KB2999226-x64.msu» /quiet /norestart’
    [0CA0:0D98][2017-02-18T19:28:39]e000: Error 0x80070652: Failed to execute MSU package.
    [1554:0594][2017-02-18T19:28:39]e000: Error 0x80070652: Failed to configure per-machine MSU package.
    [1554:0594][2017-02-18T19:28:39]w348: Application requested retry of package: Windows81_x64, encountered error: 0x80070652. Retrying…
    [1554:0594][2017-02-18T19:28:42]e000: Error 0x80070642: UX aborted execute MSU package begin.
    [1554:0594][2017-02-18T19:28:42]i319: Applied execute package: Windows81_x64, result: 0x80070642, restart: None
    [1554:0594][2017-02-18T19:28:42]e000: Error 0x80070642: Failed to execute MSU package.
    [0CA0:0D98][2017-02-18T19:28:42]i372: Session end, registration key: SOFTWAREMicrosoftWindowsCurrentVersionUninstall{e46eca4f-393b-40df-9f49-076faf788d83}, resume: ARP,
    restart: None, disable resume: No
    [0CA0:0D98][2017-02-18T19:28:42]i371: Updating session, registration key: SOFTWAREMicrosoftWindowsCurrentVersionUninstall{e46eca4f-393b-40df-9f49-076faf788d83}, resume:
    ARP, restart initiated: No, disable resume: No
    [1554:0594][2017-02-18T19:28:42]i399: Apply complete, result: 0x80070642, restart: None, ba requested restart:  No

                                       

       I would be really happy, if someone will help me. Thanks. 

    This is copy and paste from here: 
    https://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/error-during-installation-microsoft-visual-c-2015/e104ad1f-8c16-4400-8d08-830ccd4f7e45?tm=1487443163577

    Environment

    • WiX 3.10.2
    • Visual Studio 12.0
    • Windows 7, 8, 10

    I create a MSI and include it in a Bootstrapper
    to create an exe file with multi languages (package per user using «HKCU» property).

    For each user, the package is installed in «C:Users${username}AppDatalocal${installed_directory}».

    The error 0x80070642 has been reported during performing a package ‘repair’ with the following scenario:

    Log as ‘user1’

    • Install package (pkg windows user) -> OK

    Log as ‘user2’

    • Install same package -> OK

    Log as ‘user1’

    • Uninstall package -> OK

    Log as ‘user2’

    • Repair package -> Setup failed with the error 0x80070642
    • Uninstall package -> OK
    • Install package -> OK
    • Repair package -> OK
    • Uninstall package -> OK

    Product.wxs used:

    <?xml version="1.0" encoding="UTF-8"?>
<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"  xmlns:bal="http://schemas.microsoft.com/wix/BalExtension" >

    <!-- =================================================================== -->
    <!-- PRODUCT -->
    <!-- Main definitions -->
    <!-- =================================================================== -->

    <Product Id="$(Some_GUID)" UpgradeCode="$(UpgradeCode)"
             Name="$(ProductName)" Manufacturer="$(Manufacturer)" Language="1033" Version="2.1.3">
        <!-- Required definitions -->

        <Package InstallerVersion="200" Compressed="yes" InstallScope="perUser" InstallPrivileges="limited" ReadOnly="yes" />

        <MajorUpgrade AllowSameVersionUpgrades="yes" DowngradeErrorMessage="A newer version of [ProductName] is already installed." />
        <MediaTemplate EmbedCab="yes" />

        <Feature Id="ProductFeature" Title="Installer" Level="1">
            <ComponentGroupRef Id="ProductComponents" />
            <ComponentRef Id="RegistryEntries" />
        </Feature>

        <Property Id="LOGVERBOSE" Value="1"/>

        <!-- Icon specification -->

        <Icon Id="icon.ico" SourceFile="icon.ico"/>
        <Property Id="ARPPRODUCTICON" Value="icon.ico" />

        <!-- UI definition + action to run the monitor at the end -->

        <WixVariable Id="WixUIBannerBmp" Value="banner-top.bmp" />
        <WixVariable Id="WixUIDialogBmp" Value="banner-dialog.bmp" />
        <WixVariable Id="WixUILicenseRtf" Value="license.rtf" />

        <CustomAction Id="RunApp"
                      Directory="APPFOLDER"
                      ExeCommand="[APPFOLDER]application.exe"
                      Execute="immediate"
                      Impersonate="yes"
                      Return="asyncNoWait"/>

        <!-- Uninstall sequence -->

        <Binary Id='CustomAction' SourceFile='..SomeCustomActionbinReleaseSomeCustomAction.dll'/>
        <CustomAction Id='KillProcesses' BinaryKey='CustomAction' DllEntry='KillProcesses' Execute='immediate' Return='check'/>

        <InstallExecuteSequence>
            <Custom Action="RunApp" After="InstallFinalize">NOT Installed OR REINSTALL</Custom>
            <Custom Action="KillProcesses" Before="InstallValidate">1</Custom>
        </InstallExecuteSequence>
    </Product>


    <!-- =================================================================== -->
    <!-- REGISTRY KEYS -->
    <!-- Used to run the monitor at startup -->
    <!-- =================================================================== -->

    <Fragment>
        <DirectoryRef Id="TARGETDIR">
            <Component Id="RegistryEntries" Guid="$(Some_GUID)">
                <RegistryKey Root="HKCU"
                             Key="SoftwareMicrosoftWindowsCurrentVersionRun">
                    <RegistryValue Type="string" Name="SomeFolder" Value="&quot;[APPFOLDER]application.exe&quot;"/>
                </RegistryKey>
            </Component>
        </DirectoryRef>
    </Fragment>

    <!-- =================================================================== -->
    <!-- COMPONENTS -->
    <!-- Definition of the different files to install -->
    <!-- =================================================================== -->

    <Fragment>
        <Directory Id="TARGETDIR" Name="SourceDir">
            <Directory Id="LocalAppDataFolder">
                <Directory Id="INSTALLFOLDER" Name="Manufacturer">
                    <Directory Id="APPFOLDER" Name="ProductName" />
                </Directory>
            </Directory>
        </Directory>
    </Fragment>

    <Fragment>
        <ComponentGroup Id="ProductComponents" Directory="APPFOLDER">
            <!-- RemoveFolder tags are required to avoid compilation errors -->

            <Component Id="RemoveFolders" Guid="$(Some_GUID)">
                <RemoveFolder Id="APPFOLDER" Directory="APPFOLDER" On="uninstall"/>
                <RemoveFolder Id="INSTALLFOLDER" Directory="INSTALLFOLDER" On="uninstall"/>
                <RemoveFile Id="PurgeAppFolder" Name="config.conf"  On="uninstall"/>
                <RegistryKey Root="HKCU" Key="SoftwareManufacturerProductNameUninstall">
                    <RegistryValue Name="InstallFolder" Value="[APPFOLDER]" Type="string" KeyPath="yes" />
                </RegistryKey>
            </Component>

            <!-- Next are the files to install. Each file must have a registry
            key associated to avoid a compilation error. -->

          <Component Id="id1" Guid="$(Some_GUID)">
            <File Source="datainstall3rdparty-license.txt" />
            <RegistryKey Root="HKCU" Key="SoftwareManufacturerProductNameUninstall">
              <RegistryValue Name="InstallFolder" Value="[APPFOLDER]" Type="string" KeyPath="yes" />
            </RegistryKey>
          </Component>

          <Component Id="id2" Guid="$(Some_GUID)">
            <File Source="datainstallReleaseapplication.exe" />
            <RegistryKey Root="HKCU" Key="SoftwareManufacturerProductNameUninstall">
              <RegistryValue Name="InstallFolder" Value="[APPFOLDER]" Type="string" KeyPath="yes" />
            </RegistryKey>
          </Component>

    </Fragment>

</Wix>

    Bundle.wxs used:

    <?xml version="1.0" encoding="UTF-8"?>
<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" xmlns:bal="http://schemas.microsoft.com/wix/BalExtension"  xmlns:util="http://schemas.microsoft.com/wix/UtilExtension">

  <Bundle Name="$(ProductName)" Version="$(ProductVersion)" Manufacturer="$(Manufacturer)" UpgradeCode="$(UpgradeCode)">

    <WixVariable Id="WixStdbaThemeXml" Value="layoutlayout.xml"/>

    <BootstrapperApplicationRef Id="WixStandardBootstrapperApplication.RtfLicense">
        <bal:WixStandardBootstrapperApplication LogoFile="layoutWelcome.png" LicenseFile="resources1033licence.rtf" SuppressOptionsUI="yes" />

        <Payload Compressed="yes" Id="thm-de-DE" Name="1031thm.wxl" SourceFile="resources1031thm.wxl" />
        <Payload Compressed="yes" Id="thm-en-US" Name="1033thm.wxl" SourceFile="resources1033thm.wxl" />
        <Payload Compressed="yes" Id="thm-fr-FR" Name="1036thm.wxl" SourceFile="resources1036thm.wxl" />
        <Payload Compressed="yes" Id="thm-nl-NL" Name="1043thm.wxl" SourceFile="resources1043thm.wxl" />

        <Payload Compressed="yes" Id="lic-de-DE" Name="1031license.rtf" SourceFile="resources1031licence.rtf" />
        <Payload Compressed="yes" Id="lic-en-US" Name="1033license.rtf" SourceFile="resources1033licence.rtf" />
        <Payload Compressed="yes" Id="lic-fr-FR" Name="1036license.rtf" SourceFile="resources1036licence.rtf" />
        <Payload Compressed="yes" Id="lic-nl-NL" Name="1043license.rtf" SourceFile="resources1043licence.rtf" />
    </BootstrapperApplicationRef>

    <Chain>
      <MsiPackage DisplayInternalUI="no" Id="Setup" Compressed="yes" SourceFile="resourcesrelease$(MsiName)" Permanent="no" Vital="yes">
      </MsiPackage>

    </Chain>
  </Bundle>

</Wix>

    Всякий раз, когда я пытаюсь установить Python 3.6.3 (32-разрядный) на свой ноутбук под управлением Windows 7, программа установки не работает со следующей ошибкой.

    0x80070642 — Отменена пользователем установка

    Эта ошибка последовательно возникает на полпути через установку при установке «Стандартная библиотека Python 3.6.3 (32-разрядная версия)», о чем свидетельствует индикатор выполнения Python, красный цвет которого отображается на значке панели задач.

    Глядя на журнал установщика, я заметил несколько записей, в которых сообщается о том, что не Failed to secure cache path: но поиск этих ошибок не предоставил никаких дополнительных сведений.

    Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
    Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
    Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
    Error 0x80070005: Failed to cache payload: launcher_AllUsers
    Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.

    Содержание

    1. Ccmsetup failed with error code 0x80070642
    2. Asked by:
    3. Question
    4. System Center Configuration Manager и как с ним бороться
    5. проблемы с установкой клиента через Client Push installation
    6. Ccmsetup failed with error code 0x80070642
    7. Answered by:
    8. Question
    9. Answers
    10. All replies

    Ccmsetup failed with error code 0x80070642

    This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

    Asked by:

    Question

    I’m currently testing CM2012 agent deployment in a lab where we have CM2007 agent is installed.

    Currently using push method to do this and it keeps failing with the following in ccmsetup.log:

    MSI: Action 13:19:20: CcmStartService. ccmsetup 14/09/2012 13:19:20 2792 (0x0AE8)
    MSI: Action 13:19:20: InstallFinalize. ccmsetup 14/09/2012 13:19:20 2792 (0x0AE8)
    MSI: Action 13:19:20: InstallInitialize. ccmsetup 14/09/2012 13:19:20 2792 (0x0AE8)
    MSI: Action 13:19:20: CcmStopServiceRollback. ccmsetup 14/09/2012 13:19:20 2792 (0x0AE8)
    MSI: Action 13:19:20: SmsClientUninstallSucceeded. Sending status message ccmsetup 14/09/2012 13:19:20 2792 (0x0AE8)
    MSI: Action 13:19:26: ProcessComponents. Updating component registration ccmsetup 14/09/2012 13:19:26 2792 (0x0AE8)
    MSI: Action 13:19:26: UnpublishFeatures. Unpublishing Product Features ccmsetup 14/09/2012 13:19:26 2792 (0x0AE8)
    MSI: Action 13:19:26: CcmStopService. ccmsetup 14/09/2012 13:19:26 2792 (0x0AE8)
    MSI: Action 13:19:28: StopServices. Stopping services ccmsetup 14/09/2012 13:19:28 2792 (0x0AE8)
    MSI: Action 13:19:28: SmsUninstallPrepDrvrAMD64. Uninstalling Software Metering PREP Driver ccmsetup 14/09/2012 13:19:28 2792 (0x0AE8)
    MSI: Action 13:19:28: SmsSwDistCacheDirDelete. ccmsetup 14/09/2012 13:19:28 2792 (0x0AE8)
    ccmsetup is shutting down ccmsetup 14/09/2012 13:23:53 2868 (0x0B34)
    Shutdown has been requested ccmsetup 14/09/2012 13:23:53 2792 (0x0AE8)
    Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 14/09/2012 13:23:53 2792 (0x0AE8)
    MSI: Action 13:37:33: SmsStopUIComponents. Stopping UI Components ccmsetup 14/09/2012 13:37:33 2792 (0x0AE8)
    Shutdown has been requested ccmsetup 14/09/2012 13:37:33 2792 (0x0AE8)
    Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 14/09/2012 13:37:33 2792 (0x0AE8)
    MSI: Action 13:37:33: Rollback. Rolling back action: ccmsetup 14/09/2012 13:37:33 2792 (0x0AE8)
    Shutdown has been requested ccmsetup 14/09/2012 13:37:33 2792 (0x0AE8)
    Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 14/09/2012 13:37:33 2792 (0x0AE8)
    Installation was cancelled (1602) ccmsetup 14/09/2012 13:37:34 2792 (0x0AE8)
    InstallFromManifest failed 0x80070642 ccmsetup 14/09/2012 13:37:34 2792 (0x0AE8)
    A Fallback Status Point has not been specified. Message with STATEID=’313′ will not be sent. ccmsetup 14/09/2012 13:37:34 2792 (0x0AE8)
    CcmSetup failed with error code 0x80070642 ccmsetup 14/09/2012 13:37:34 2868 (0x0B34)

    Источник

    System Center Configuration Manager и как с ним бороться

    SCCM, Intune, MDT, EMS, MDM, MAM, Azure AD и другие странные слова

    проблемы с установкой клиента через Client Push installation

    Заметки на полях.

    Сейчас провожу внутреннее обучение для коллег в виде курса по SCCM vNext и в нескольких лабораторных инфраструктурах были встречены следующие ошибки:

    Failed to send status 309. Error (87D00215)

    Failed to download from DP ‘http://SCCMNEXT.firma.com/SMS_DP_SMSPKG$/TP400002’, error 0x800706d9.

    Enumerated all 1 DP locations but none of them is good. Fallback to MP.

    Failed to download client files by BITS. Error 0x800706d9

    Решение проблемы: сделать исключение на фаерволле для BITS (порт TCP 80) или выключить фаерволл, но не останавливать службу Windows Firewall (если это лабораторная среда).

    InstallFromManifest failed 0x80070642

    Failed to get client version for sending state messages. Error 0x8004100e

    Failed to send status 311. Error (87D00215)

    Failed to connect to policy namespace. Error 0x8004100e

    CcmSetup failed with error code 0x80070642

    Решение проблемы: сделать восстановление WMI — открыть %windir%System32WBEM или SysWOW64WBEM и запустить

    GetDPLocations failed with error 0x80072ee7

    Failed to get DP locations as the expected version from MP ‘SCCM.contoso.com’. Error 0x80072ee7

    Failed to get client version for sending state messages. Error 0x8004100e

    Решение проблемы: проверить доступность контроллера домена — настройки IP/DNS/etc.

    Источник

    Ccmsetup failed with error code 0x80070642

    This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

    Answered by:

    Question

    Running SCCM 2012 SP1 with hotfix 2801987

    The client is failing to install during the task sequence process because of a reboot in the middle of it? Can anyone help determine why from the ccmsetup log?

    Answers

    what does your client.msi.log file tell you ?

    Step by Step Configuration Manager Guides > 2012 Guides | 2007 Guides | I’m on Twitter > ncbrady

    are you installing the client using any other method ?

    what is causing the reboot is it a step in the task sequence or the setup windows and configmgr step ? (which does reboot the computer and is expected)

    Step by Step Configuration Manager Guides > 2012 Guides | 2007 Guides | I’m on Twitter > ncbrady

    what does your client.msi.log file tell you ?

    Step by Step Configuration Manager Guides > 2012 Guides | 2007 Guides | I’m on Twitter > ncbrady

    are you installing the client using any other method ?

    what is causing the reboot is it a step in the task sequence or the setup windows and configmgr step ? (which does reboot the computer and is expected)

    Step by Step Configuration Manager Guides > 2012 Guides | 2007 Guides | I’m on Twitter > ncbrady

    Nick Moseley | http://t3chn1ck.wordpress.com

    To clarify, are you installing the client hotfix with the PATCH= command line parameter in the Setup Windows and ConfigMgr step? (And thus not installing it as a swd package)

    Nick Moseley | http://t3chn1ck.wordpress.com

    No, we’re not doing that. Can you explain that a little further?

    Also, the worse part about this is it’s intermittent even on the same exact machine.

    You can’t patch the SCCM client like that while it’s actively running the task sequence. In the same place where you are also specifying the SMSMP=»server» and the other parameters, you also have to specify client hotfixes in there with the PATCH= command line parameter. which the instructions are typically outlined in the KB for the hotfix. However, in checking the actual patch you’ve specified above, I thought it was a client side hotfix, but it’s only a server hotfix.

    At what stage is your task sequence restarting and then halting? Have you checked the SMSTS.log for more details?

    Nick Moseley | http://t3chn1ck.wordpress.com

    You can’t patch the SCCM client like that while it’s actively running the task sequence. In the same place where you are also specifying the SMSMP=»server» and the other parameters, you also have to specify client hotfixes in there with the PATCH= command line parameter. which the instructions are typically outlined in the KB for the hotfix. However, in checking the actual patch you’ve specified above, I thought it was a client side hotfix, but it’s only a server hotfix.

    At what stage is your task sequence restarting and then halting? Have you checked the SMSTS.log for more details?

    Nick Moseley | http://t3chn1ck.wordpress.com

    To clarify, are you installing the client hotfix with the PATCH= command line parameter in the Setup Windows and ConfigMgr step? (And thus not installing it as a swd package)

    Nick Moseley | http://t3chn1ck.wordpress.com

    yannara, are you asking about http://support.microsoft.com/kb/2801987? You don’t have to provide a PATCH= statement after having this patch installed. Just update the ConfigMgr client package on DPs.
    s10xtremenlow: have you updated the DPs after having the hotfix installed? (The error message does not indicate that you are running into the issue described in kb2801987 though)

    • Edited by TorstenM MVP Monday, January 21, 2013 3:55 PM

    yannara, are you asking about http://support.microsoft.com/kb/2801987? You don’t have to provide a PATCH= statement after having this patch installed. Just update the ConfigMgr client package on DPs.
    s10xtremenlow: have you updated the DPs after having the hotfix installed? (The error message does not indicate that you are running into the issue described in kb2801987 though)

    Here are all of the logs. SMSTS.log, client.msi, ccmsetup.log, etc

    The task sequence runs action setup windows and config manager and downloads the files. It then reboots into sysprep, runs sysprep and reboots to windows. It gets to installing the configuration manager client and reboots in the middle of it. Comes back into windows and we’re presented with the logon screen. The client re-installs behind the scenes at while its sitting at the logon screen but no other tasks run that are after the client install in the task sequence.

    Pulled this from your SMSTS.log and seems to be source of your problem.

    Failed to create certificate store from encoded certificate.. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
    The parameter is incorrect. (Error: 80070057; Source: Windows)

    Are you operating in HTTP or HTTPS? Have you followed the guides in http://technet.microsoft.com/en-us/library/gg699362.aspx?

    Nick Moseley | http://t3chn1ck.wordpress.com

    Pulled this from your SMSTS.log and seems to be source of your problem.

    Failed to create certificate store from encoded certificate.. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
    The parameter is incorrect. (Error: 80070057; Source: Windows)

    Are you operating in HTTP or HTTPS? Have you followed the guides in http://technet.microsoft.com/en-us/library/gg699362.aspx?

    Nick Moseley | http://t3chn1ck.wordpress.com

    I’m operating on both I believe. I’ll look at that guide now. Why would this be intermittent? I’d rather not use HTTPS.

    I believe we figured out what was causing it. What’s really frustrating is the logs don’t reference anything to the issue but I happened to find someone else with a similar issue and this was the fix for him too..

    For boundaries we were using subnets that we manually entered and they were part of boundary groups. We imported subnets from sites and services of AD and forgot to put those in boundary groups. Once we did that this issue immediately was cleared.

    Basically we had:

    192.168.5.0/24 — In a boundary group

    192.168.5.1-192.168.5.254 — was not in a boundary group. we put this in a boundary group and it immediately started working.

    Источник

    I have W10 with a 4690K and a MSI Z97 gaming 6 board. When I try to install the intel extreme tuning utility ver 6.0.0.14 the installation fails and I get this message. service intel(R) Extreme Tuning Utility Service (XTU3SERVICE) could not be installed. verify that you have sufficient privileges to install system services. I am installing using an ADMIN account. How can I fix this??

    Here is the install log:

    [1BF4:1C9C][2015-07-28T17:03:16]: Burn v3.6.2803.0, Windows v6.2 (Build 9200: Service Pack 0), path: C:UserscrisantaDocumentsextreme_tuning_9_w10Intel Extreme Tuning Utility_6.0.0.14XTU-Setup-exe.exe, cmdline: »

    [1BF4:1C9C][2015-07-28T17:03:16]: Initializing string variable ‘RemoveAllDataCheckboxValue’ to value ‘[RemoveAllDataCheckbox]’

    [1BF4:1C9C][2015-07-28T17:03:16]: Setting string variable ‘WixBundleLog’ to value ‘C:UserscrisantaAppDataLocalTempIntel_Extreme_Tuning_Utility_20150728170316.log’

    [1BF4:1C9C][2015-07-28T17:03:16]: Setting string variable ‘WixBundleOriginalSource’ to value ‘C:UserscrisantaDocumentsextreme_tuning_9_w10Intel Extreme Tuning Utility_6.0.0.14XTU-Setup-exe.exe’

    [1BF4:1C9C][2015-07-28T17:03:16]: Condition ‘VersionNT >= v6.1’ evaluates to true.

    [1BF4:1C9C][2015-07-28T17:03:16]: Setting string variable ‘WixBundleName’ to value ‘Intel Extreme Tuning Utility’

    [1BF4:1C9C][2015-07-28T17:03:17]: Detect 3 packages

    [1BF4:1C9C][2015-07-28T17:03:17]: Detected package: SSCERuntime_x86_ENU.msi, state: Present, cached: None

    [1BF4:1C9C][2015-07-28T17:03:17]: Detected package: SSCERuntime_x64_ENU.msi, state: Present, cached: None

    [1BF4:1C9C][2015-07-28T17:03:17]: Detected package: XTU_Setup.msi, state: Absent, cached: None

    [1BF4:1C9C][2015-07-28T17:03:17]: Detect complete, result: 0x0

    [1BF4:1C9C][2015-07-28T17:03:19]: Plan 3 packages, action: Install

    [1BF4:1C9C][2015-07-28T17:03:19]: Condition ‘VersionNT64’ evaluates to true.

    [1BF4:1C9C][2015-07-28T17:03:19]: Setting string variable ‘WixBundleRollbackLog_XTU_Setup.msi’ to value ‘C:UserscrisantaAppDataLocalTempIntel_Extreme_Tuning_Utility_20150728170316_0_XTU_Setup.msi_rol…

    [1BF4:1C9C][2015-07-28T17:03:19]: Setting string variable ‘WixBundleLog_XTU_Setup.msi’ to value ‘C:UserscrisantaAppDataLocalTempIntel_Extreme_Tuning_Utility_20150728170316_0_XTU_Setup.msi.log…

    [1BF4:1C9C][2015-07-28T17:03:19]: Planned package: SSCERuntime_x86_ENU.msi, state: Present, default requested: Present, ba requested: Present, execute: None, rollback: None, cache: No, uncache: No, dependency: Register

    [1BF4:1C9C][2015-07-28T17:03:19]: Planned package: SSCERuntime_x64_ENU.msi, state: Present, default requested: Present, ba requested: Present, execute: None, rollback: None, cache: No, uncache: No, dependency: Register

    [1BF4:1C9C][2015-07-28T17:03:19]: Planned package: XTU_Setup.msi, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: Yes, uncache: No, dependency: Register

    [1BF4:1C9C][2015-07-28T17:03:19]: Plan complete, result: 0x0

    [1BF4:1C9C][2015-07-28T17:03:19]: Apply begin

    [1E7C:1E74][2015-07-28T17:03:20]: Automatic updates could not be paused due to error: 0x80040154. Continuing…

    [1E7C:1E74][2015-07-28T17:03:20]: Creating a system restore point.

    [1E7C:1E74][2015-07-28T17:03:20]: Could not create system restore point, error: 0x80070422. Continuing…

    [1E7C:1E74][2015-07-28T17:03:20]: Caching bundle from: ‘C:UserscrisantaAppDataLocalTemp{b4b6151d-4959-4ed6-a8ee-8c991f318510}.bextu-setup-exe.exe’ to: ‘C:ProgramDataPackage Cache{b4b6151d-4959-4ed6-a8ee-8c991f318510}xtu-setup-exe.exe’

    [1E7C:1E74][2015-07-28T17:03:20]: Registering bundle dependency provider: {b4b6151d-4959-4ed6-a8ee-8c991f318510}, version: 6.0.0.14

    [1E7C:1528][2015-07-28T17:03:21]: Verified acquired payload: XTU_Setup.msi at path: C:ProgramDataPackage Cache.unverifiedXTU_Setup.msi, moving to: C:ProgramDataPackage Cache{46A9FDE7-4EC8-4FB4-A713-8AD3805C7017}v6.0.0.14XTU-Setup.msi.

    [1E7C:1E74][2015-07-28T17:03:21]: Registering dependency: {b4b6151d-4959-4ed6-a8ee-8c991f318510} on package provider: {3A9FC03D-C685-4831-94CF-4EDFD3749497}, package: SSCERuntime_x86_ENU.msi

    [1E7C:1E74][2015-07-28T17:03:21]: Registering dependency: {b4b6151d-4959-4ed6-a8ee-8c991f318510} on package provider: {D4AD39AD-091E-4D33-BB2B-59F6FCB8ADC3}, package: SSCERuntime_x64_ENU.msi

    [1E7C:1E74][2015-07-28T17:03:21]: Applying execute package: XTU_Setup.msi, action: Install, path: C:ProgramDataPackage Cache{46A9FDE7-4EC8-4FB4-A713-8AD3805C7017}v6.0.0.14XTU-Setup.msi, arguments: ‘ ARPSYSTEMCOMPONENT=»1″ MSIFASTINSTALL=»7″ REMOVEALLAPPDATA=»»‘

    [1E7C:1E74][2015-07-28T17:03:44]: Error 0x80070643: Failed to install MSI package.

    [1E7C:1E74][2015-07-28T17:03:44]: Error 0x80070643: Failed to execute MSI package.

    [1BF4:1C9C][2015-07-28T17:03:44]: Error 0x80070643: Failed to configure per-machine MSI package.

    [1BF4:1C9C][2015-07-28T17:03:44]: Application requested retry of package: XTU_Setup.msi, encountered error: 0x80070643. Retrying…

    [1BF4:1C9C][2015-07-28T17:03:47]: Error 0x80070642: UX aborted execute MSI package begin.

    [1BF4:1C9C][2015-07-28T17:03:47]: Error 0x80070642: Failed to execute MSI package.

    [1E7C:1E74][2015-07-28T17:03:47]: Skipped rollback of package: XTU_Setup.msi, action: Uninstall, already: Absent

    [1E7C:1E74][2015-07-28T17:03:47]: Removing cached package: XTU_Setup.msi, from path: C:ProgramDataPackage Cache{46A9FDE7-4EC8-4FB4-A713-8AD3805C7017}v6.0.0.14

    [1E7C:1E74][2015-07-28T17:03:47]: Removing dependency: {b4b6151d-4959-4ed6-a8ee-8c991f318510} on package provider: {D4AD39AD-091E-4D33-BB2B-59F6FCB8ADC3}, package SSCERuntime_x64_ENU.msi

    [1E7C:1E74][2015-07-28T17:03:47]: Removing dependency: {b4b6151d-4959-4ed6-a8ee-8c991f318510} on package provider: {3A9FC03D-C685-4831-94CF-4EDFD3749497}, package SSCERuntime_x86_ENU.msi

    [1E7C:1E74][2015-07-28T17:03:47]: Removing bundle dependency provider: {b4b6151d-4959-4ed6-a8ee-8c991f318510}

    [1E7C:1E74][2015-07-28T17:03:47]: Removing cached bundle: {b4b6151d-4959-4ed6-a8ee-8c991f318510}, from path: C:ProgramDataPackage Cache{b4b6151d-4959-4ed6-a8ee-8c991f318510}

    [1BF4:1C9C][2015-07-28T17:03:47]: Apply complete, result: 0x80070642, restart: None, ba requested restart: No

    • Remove From My Forums

    • Question

    • Hi guys,

      I need some help with SCCM 2012 task sequence offline media.

      I have few applications failing to install when i use the offline media. if run the same task sequence it works fine.

      Scenario 1:

      Application A.

      Created a program using script — That works fine with online and offline

      Created a program using commandline: online works but offline build fails with error 0x80070642.

      In smsts.log: Failed to run the last action: ‘Application name’. Execution of task sequence failed. User Cancelled installation. (Error: 80070642; Source: Windows).

      I have 10+ application having the same problem.

      Anyone know what is causing this problem?

      Thanks in advance.

    Answers

    • I would do two things to get some more information.

      • Compare a working smsts.log (non-offline) and the offline smsts.log to see the differences. 
      • Enable logging on your applications to see what the installer shows as happening

      There is also another post on TechNet with a similar issue, perhaps try the fixes there as well.

      http://social.technet.microsoft.com/Forums/systemcenter/en-us/aa34d808-09a8-4346-851f-f6f7d80c4e5f/standalone-media-ts-fails?forum=configmgrosd

      Daniel Ratliff | http://www.PotentEngineer.com

      • Marked as answer by

        Sunday, June 8, 2014 11:11 AM

    Источник

    Whenever I try to install Python 3.6.3 (32-bit) to my Windows 7 laptop at work, the installer fails with the following error.

    0x80070642 — User cancelled installation

    This error consistently occurs half-way through the installation while installing «Python 3.6.3 Standard Library (32-bit)», as indicated by Python’s progress bar turning red in the taskbar icon.

    Looking at the installer log, I noticed a few entries which report Failed to secure cache path:, but searching these errors hasn’t provided any additional details.

    Error 0x80070005: Failed to secure cache path: C:ProgramDataPackage Cache
Error 0x80070005: Failed to secure cache directory: C:ProgramDataPackage Cache
Error 0x80070005: Failed to get cached path for package with cache id: {C093353B-F9EE-4A06-923D-C1B340B82886}v3.6.6119.0
Error 0x80070005: Failed to cache payload: launcher_AllUsers
Failed to cache payload: launcher_AllUsers from working path: C:UsersSVASCE~1AppDataLocalTemp{973D88A7-E2AD-4A3C-AA24-79C5637B217A}launcher_AllUsers, error: 0x80070005.
    Источник

    Понравилась статья? Поделить с друзьями:
  • Ошибка при установке postman
  • Ошибка при установке portal 2
  • Ошибка при установке pkg на ps3
  • Ошибка при установке physx
  • Ошибка при установке pes 2016