Ошибка при выполнении regsvr32 код возврата 0x3

“unable to register the dll/ocx regsvr32 failed with exit code 0x3” error can come after installing any software and whenever you open software that you have installed from the internet or from CD, any external device.

Mostly you see this error like “unable to register the dll/ocx regsvr32 failed with exit code 0x3” or like “unable to register the dll/ocx regsvr32 0x3”.

---

These errors most probably happen when a particular software does not have sufficient permissions, and due to lack of permission, a software will be unable to register itself on your computer.

Another reason could be your anti virus is not letting your software the permissions to register itself.

So, we need to give permissions to that particular software that causing this issue, follow the solution which is given below.

Checkout : iCloud Activation bypass

---

Solution 1: Run Program as Administrator

First, you need to install the software by right-clicking and selecting “Run as administrator,” as shown below.

1. Right Click on the program (Which is causing the issue) to get the Options.

   

2. Select “Run As Administrator“.

   

3. Now, you need to open the software by right-clicking and selecting “Run as administrator,” as shown below.
4. Right Click to get the Options.

   

5. Now Select “Run As Administrator“

   

Now the software may not show “unable to register the dll/ocx regsvr32 failed with exit code 0x3” again.

---

Solution 2: Disable Antivirus

You need to make sure if an antivirus is causing the “unable to register the dll/ocx regsvr32 failed with exit code 0x3” error, follow the steps to disable antivirus.

• Make sure to disable or terminate Windows Defender or your antivirus.
• Whitelist the software that causes this issue.

2.1 Turn off Windows Defender:

Follow the steps to turn off Windows Defender:

1. Click on Start and go to Settings>Update&Security>Windows Security>Firewall & network protection, and open Windows Security Settings.
2. Now Select a network profile.
3. Now Switch the Settings On under the the Microsoft Defender Firewall.
4. Restart your Computer.

2.2 Third-Party Antivirus

If you have antivirus other than Windows Defender, you would need to disable that for some time.

1. Go to the right bottom of the taskbar and find the Antivirus.

   

2. Right Click on Antivirus to get the options.
3. Now select any option out of the given to disable Antivirus.

   

Now Restart your computer and see if “unable to register the dll/ocx regsvr32 failed with exit code 0x3” resolved.

---

Conclusion:

We have concluded the two best and easy solutions for the error “unable to register the dll/ocx regsvr32 failed with exit code 0x3”.

If you have fixed this issue thank you for coming by and if you are still having this issue make sure to comment your query.

I will be glad to assist you and help you find a way to fix the “unable to register the dll/ocx regsvr32 failed with exit code 0x3” error.

---

Read Next:

What is Error 0x3?

Error 0x3 is a kind of Runtime error that is found in the Microsoft Windows operating systems. The file can be found for K-Lite. RegSvr32 failed with exit code 0x3 has a popularity rating of 1 / 10.

Errors

This tutorial contains information on Error 0x3 or otherwise known as RegSvr32 failed with exit code 0x3. Errors such as RegSvr32 failed with exit code 0x3 indicate your machine has faulty hardware or software that should be fixed when possible. Below is information on how to repair Error 0x3 and get your computer back to normal.

What Causes Runtime Errors Like Error 0x3?

There are several causes of runtime errors like RegSvr32 failed with exit code 0x3, such as viruses, out of date drivers, missing files or folders, incomplete or poor installation, and registry errors. They can also occur due to an issue with the computer’s memory, which may often be due to a hardware problem. In some cases there was an issue installing K-Lite and an error occurred.

How to Fix RegSvr32 failed with exit code 0x3

Follow the step by step instructions below to fix the Error 0x3 problem. We recommend you do each in order. If you wish to skip these steps because they are too time consuming or you are not a computer expert, see our easier solution below.

Step 1 — Uninstall and Reinstall K-Lite

If the RegSvr32 failed with exit code 0x3 is a result of using K-Lite, you may want to try reinstalling it and see if the problem is fixed. Please follow these steps:

---

Step 2 — Remove Registry Entry related to Error 0x3

WARNING: Do NOT edit the Windows Registry unless you absolutely know what you are doing. You may end up causing more trouble than you start with. Proceed at your OWN RISK.

1. Create a backup of registry files.
2. Click “Start”.
3. Type regedit, select it, and grant permission in order to proceed.
4. Click HKEY LOCAL MACHINE>>SOFTWARE>>Microsoft>>Windows>>Current Version>>Uninstall.
5. Find the RegSvr32 failed with exit code 0x3 software from the list you wish to uninstall.
6. Select the software and double click the UninstallString icon on the right side.
7. Copy the highlighted text.
8. Exit and go to the search field.
9. Paste the data.
10. Select Okay in order to uninstall the program.
11. Reinstall the software.

---

Step 3 – Ensure Junk Isn’t Causing RegSvr32 failed with exit code 0x3

Any space that isn’t regularly cleaned out tends to accumulate junk. Your personal computer is no exception. Constant web browsing, installation of applications, and even browser thumbnail caches slow down your device and in the absence of adequate memory, can also trigger a RegSvr32 failed with exit code 0x3 error.

So how do you get around this problem?

• You can either use the Disk Cleanup Tool that comes baked into your Windows operating system.
• Or you can use a more specialized hard drive clean up solution that does a thorough job and flushes the most stubborn temporary files from your system.

Both solutions may take several minutes to complete the processing of your system data if you haven’t conducted a clean up in a while.
The browser caches are almost a lost cause because they tend to fill up quite rapidly, thanks to our constantly connected and on the go lifestyle.
Here’s how you can run the Window’s Disk Cleanup Tool, without performance issues or surprises.

• For Windows XP and Windows 7, the program can be ran from “Start” and from the “Command Prompt”.
  • Click “Start”, go to All Programs > Accessories > System Tools, click Disk Cleanup. Next choose the type of files you wish to remove, click OK, followed by “Delete Files”.
  • Open up the Command Prompt, type “c:windowscleanmgr.exe /d” for XP and “cleanmgr” for Windows 7. Finish by pressing “Enter”.
• For Windows 8 and Windows 8.1, the Disk Cleanup Tool can be accessed directly from “Settings”. Click “Control Panel” and then “Administrative Tools”. You can select the drive that you want to run the clean up on. Select the files you want to get rid of and then click “OK” and “Delete Files”.
• For Windows 10, the process is simplified further. Type Disk Cleanup directly in the search bar and press “Enter”. Choose the drive and then the files that you wish to wipe. Click “OK”, followed by “Delete Files”.

The progressive ease with which the Cleanup Tool can be used points to the growing importance of regularly deleting temporary files and its place in preventing RegSvr32 failed with exit code 0x3.

PRO TIP:
Remember to run the Disk Cleanup as an administrator.

---

Step 4 – Fix Infections and Eliminate Malware in Your PC

How do you gauge if your system is infected with a malware and virus?

Well, for one, you may find certain applications misbehaving.

And you may also see the occurrence of Error 0x3.

Infections and malware are the result of:

• Browsing the Internet using open or unencrypted public Wi-Fi connections
• Downloading applications from unknown and untrustworthy sources
• Intentional planting of viruses in your home and office networks

But thankfully, their impact can be contained.

• Enter “safe mode” by pressing the F8 key repeatedly when your device is restarting. Choose “Safe Mode with Networking” from the Advanced Boot Options menu.
• Back up all the data in your device to a secure location. This is preferably a storage unit that is not connected to your existing network.
• Leave program files as is. They are where the infection generally spreads from and may have been compromised.
• Run a thorough full-system scan or check of an on-demand scanner. If you already have an antivirus or anti-malware program installed, let it do the heavy lifting.
• Restart your computer once the process has run its course.
• Lastly, change all your passwords and update your drivers and operating system.

PRO TIP: Are you annoyed by the frequent updates to your antivirus program? Don’t be! These regular updates add new virus signatures to your software database for exponentially better protection.

---

Step 5 – Return to the Past to Eliminate Error 0x3

The steps outlined up until this point in the tutorial should have fixed RegSvr32 failed with exit code 0x3 error. But the process of tracking what has caused an error is a series of educated guesses. So in case the situation persists, move to Step 5.

Windows devices give users the ability to travel back in time and restore system settings to an uncorrupted, error free state.
This can be done through the convenient “System Restore” program. The best part of the process is the fact that using System Restore doesn’t affect your personal data. There is no need to take backups of new songs and pictures in your hard drive.

• Open “Control Panel” and click on “System & Security”.
• Choose the option “System”.
• To the left of the modal, click on “System Protection”.
• The System Properties window should pop-up. You’ll be able to see the option “System Restore”. Click on it.
• Go with “Recommended restore” for the path of least hassles and surprises.
• Choose a system restore point (by date) that will guarantee taking your device back to the time when Error 0x3 hasn’t been triggered yet.
• Tap “Next” and wrap up by clicking “Finish”.

If you’re using Windows 7 OS, you can reach “System Restore” by following the path Start > All Programs > Accessories > System Tools.

---

Step 6 — Error 0x3 Caused by Outdated Drivers

Updating a driver is not as common as updating your operating system or an application used to run front-end interface tasks.

Drivers are software snippets in charge of the different hardware units that keep your device functional.

So when you detect an RegSvr32 failed with exit code 0x3 error, updating your drivers may be a good bet. But it is time consuming and shouldn’t be viewed as a quick fix.

Here’s the step-by-step process you can go through to update drivers for Windows 8, Windows 8.1 and Windows 10.

• Check the site of your hardware maker for the latest versions of all the drivers you need. Download and extract them. We strongly advice going with original drivers. In most cases, they are available for free on the vendor website. Installing an incompatible driver causes more problems than it can ever fix.
• Open “Device Manager” from the Control Panel.
• Go through the various hardware component groupings and choose the ones you would like to update.
• On Windows 10 and Windows 8, right-click on the icon of the hardware you would like to update and click “Update Driver”.
• On Windows 7 and Vista, you right-click the hardware icon, choose “Properties”, navigate to the Driver panel, and then click “Update Driver”.
• Next you can let your device automatically search for the most compatible drivers, or you can choose to update the drivers from the versions you have on your hard drive. If you have an installer disk, then the latter should be your preferred course of action. The former may often get the driver selection incorrect.
• You may need to navigate a host of warnings from the Windows OS as you finalize the driver update. These include “Windows can’t verify that the driver is compatible” and “Windows can’t verify the publisher of this driver”. If you know that you have the right one in line, click “Yes”.
• Restart the system and hopefully the RegSvr32 failed with exit code 0x3 error should have been fixed.

---

Step 7 – Call the Windows System File Checker into Action

By now the RegSvr32 failed with exit code 0x3 plaguing your device should have been fixed. But if you haven’t resolved the issue yet, you can explore the Windows File Checker option.

With the Windows File Checker, you can audit all the system files your device needs to operate, locate missing ones, and restore them.
Sound familiar? It is almost like “System Restore”, but not quite. The System Restore essentially takes you back in time to a supposedly perfect set up of system files. The File Checker is more exhaustive.

It identifies what is amiss and fills the gaps.

• First and foremost, open up an elevated command prompt.
• Next, if you are using Windows 8, 8.1 or 10, enter “DISM.exe /Online /Cleanup-image /Restorehealth” into the window and press Enter.
• The process of running the Deployment Image Servicing and Management (DISM) tool may take several minutes.
• Once it completes, type the following command into the prompt “sfc /scannow”.
• Your device will now go through all protected files and if it detects an anomaly, it will replace the compromised version with a cached version that resides at %WinDir%System32dllcache.

---

Step 8 – Is your RAM Corrupted? Find Out.

Is it possible? Can the memory sticks of your device trigger Error 0x3?

It is unlikely – because the RAM chips have no moving parts and consume little power. But at this stage, if all else has failed, diagnosing your RAM may be a good move.

You can use the Windows Memory Diagnostics Tool to get the job done. Users who are on a Linux or Mac and are experiencing crashes can use memtest86.

• Open up your device and go straight to the “Control Panel”.
• Click on “Administrative Tools”.
• Choose “Windows Memory Diagnostic”.
• What this built-in option does is it burns an ISO image of your RAM and boots the computer from this image.
• The process takes a while to complete. Once it is done, the “Status” field at the bottom of the screen populates with the result of the diagnosis. If there are no issues with your RAM/memory, you’ll see “No problems have been detected”.

One drawback of the Windows Memory Diagnostic tool pertains to the number of passes it runs and the RAM segments it checks.

Memtest86 methodically goes over all the segments of your memory – irrespective of whether it is occupied or not.

But the Windows alternative only checks the occupied memory segments and may be ineffective in gauging the cause of the RegSvr32 failed with exit code 0x3 error.

---

Step 9 – Is your Hard Drive Corrupted? Find Out.

Your RAM or working memory isn’t the only culprit that may precipitate an RegSvr32 failed with exit code 0x3 error. The hard drive of your device also warrants close inspection.

The symptoms of hard drive error and corruption span:

• Frequent crashes and the Blue Screen of Death (BSoD).
• Performance issues like excessively slow responses.
• Errors like Error 0x3.

Hard drives are definitely robust, but they don’t last forever.

There are three things that you can do to diagnose the health of your permanent memory.

• It is possible that your device may have a hard time reading your drive. This can be the cause of an RegSvr32 failed with exit code 0x3 error. You should eliminate this possibility by connecting your drive to another device and checking for the recurrence of the issue. If nothing happens, your drive health is okay.
• Collect S.M.A.R.T data by using the WMIC (Windows Management Instrumentation Command-line) in the command prompt. To do this, simply type “wmic” into the command prompt and press Enter. Next follow it up with “diskdrive get status”. The S.M.A.R.T status reading is a reliable indicator of the longevity of your drive.
• Fix what’s corrupt. Let’s assume you do find that all isn’t well with your hard drive. Before you invest in an expensive replacement, using Check Disk or chkdsk is worth a shot.
  • Open the command prompt. Make sure you are in Admin mode.
  • Type “chkdsk C: /F /X /R” and press “Enter”. “C” here is the drive letter and “R” recovers data, if possible, from the bad sectors.
  • Allow the system to restart if the prompt shows up.
  • And you should be done.

These steps can lead to the resolution you’re seeking. Otherwise the RegSvr32 failed with exit code 0x3 may appear again. If it does, move to Step 10.

---

Step 10 – Update Windows OS

Like the software applications you use to render specific tasks on your device, the Operating System also requires periodic updates.
Yes, we’ve all heard the troubling stories.

Devices often develop problems post unfinished updates that do not go through. But these OS updates include important security patches. Not having them applied to your system leaves it vulnerable to viruses and malware.

And may also trigger Error 0x3.

So here’s how Windows 7, Windows 8, Windows 8.1 and Windows 10 users can check for the latest updates and push them through:

• Click the “Start” button on the lower left-hand corner of your device.
• Type “Updates” in the search bar. There should be a “Windows Update” or “Check for Updates” option, based on the OS version you’re using.
• Click it. The system will let you know if any updates are available.
• You have the convenience of choosing the components of the update you’d like to push through. Always prioritize the security updates.
• Click “OK” followed by “Install Updates”.

---

Step 11 – Refresh the OS to Eliminate Persistent RegSvr32 failed with exit code 0x3 Error

“Windows Refresh” is a lifesaver.

For those of you who are still with us and nothing has worked to eliminate the Error 0x3, until recently, a fresh install of Windows would have been the only option.

Not anymore.

The Windows Refresh is similar to reinstalling your Windows OS, but without touching your personal data. That’s hours of backup time saved in a jiffy.

Through the Refresh, all your system files become good as new. The only minor annoyance is the fact that any custom apps you’ve installed are gone and the system applications you had uninstalled are back.

Still, it is the best bet as the final step of this process.

• Enter the “Settings” of your PC and click on “Change Settings”.
• Click “Update and recovery” and then choose “Recovery”.
• Select “Keep my files”. This removes apps and settings, but lets your personal files live on.
• You’ll get some warning messages about the apps that will be uninstalled. If you’ve gone through a recent OS upgrade, the Refresh process makes it so that you can’t go back to your previous OS version – if you should ever feel the need to do it.
• Click the “Refresh” button.

Are you using an older version of Windows that doesn’t come with the power to “Refresh”?

Maybe it is time to start from scratch.

• Enter your BIOS set-up.
• This is where you need to change your computer’s boot order. Make it so that the boot happens not from the existing system files, but from the CD/DVD Drive.
• Place the original Windows disk in the CD/DVD drive.
• Turn on or restart the device.
• Choose where you’d like the system files to be installed.
• Your PC will restart several times as the process runs its course.

---

FAQ’s

Do Runtime Errors Mean I Have to Buy a New Computer?

No, you do not if you are battling errors like RegSvr32 failed with exit code 0x3 and like RegSvr32 failed with exit code 0x3. Runtime errors generally occur due to software issues and can be sorted out easily. In some cases, bad or aging hardware may be the cause, but such components can also be replaced. Hence, there’s usually no need to buy a new computer due to runtime errors.

What Do Runtime Errors Like Error 0x3 Have to Do with the Windows Registry?

The Windows Registry is basically a collection of databases in MS Windows. The registry issues are usually the number one cause of runtime errors. The Registry may corrupt due to missing files or poor installation, leading to runtime errors. The problem can typically be solved by using a software designed to fix the Registry.

Will Removing Runtime Errors Like Error 0x3 Improve My Start Up Speed?

Runtime errors have no impact on the start up speed since the error occurs while the program is running. It may, however, cause the OS to crash during or after start up. Correcting runtime errors will have no impact on the startup speed of the computer. It may just help you save time by reducing crashes and errors which may cause the computer to keep starting up.

Start Download Now

Author:

Click here follow the steps to fix Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3 and related errors.

Instructions

To Fix (Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3) error you need to follow the steps below:
Step 1:
Download (Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3) Repair Tool
Step 2:
Click the «Scan» button
Step 3:
Click ‘Fix All‘ and you’re done!
Compatibility: Windows 10, 8.1, 8, 7, Vista, XP Download Size: 6MB Requirements: 300 MHz Processor, 256 MB Ram, 22 MB HDD Limitations: This download is a free evaluation version. To unlock all features and tools, a purchase starting from $19.95 is required.

Note:
This article was updated on 2023-05-31 and previously published under WIKI_Q210794

What are Windows errors?

A Windows error is an error that happens when an unexpected condition occurs or when a desired operation has failed. When you have an error in Windows — whether it’s Windows 7, Windows XP or Windows Vista — it may be critical and cause your programs to freeze and crash or it may be seemingly harmless yet annoying. Left unchecked, your system will become increasingly unstable, run more slowly and crash more frequently. You may be left unable to run programs at all.

The procedures necessary to correct Windows errors differ from one case to another. You could try a do it yourself or DIY method to fix Windows errors. This requires that you research the exact error message that’s listed on the error pop-up window. But what if it’s a virus causing this Windows error? Or what if your search doesn’t turn up any fixes? If you manage to find the fix, it’s something best done by professional technicians or a professional Windows Repair program.

The recommended solution is to use the Reimage professional Windows system repair software which runs a deep scan of your Windows system, finds and automatically fixes system files and components that are causing those Windows errors. Reimage is the only program that has over 25,000,000 files in a repository and actually fixes your corrupted, malfunctioning and missing Windows software files. Run Reimage repair now to get a free PC report to see what PC problems you have and also get a free spyware and virus scan.

Reimage increases performance, stops computer freezing and system crashes as well as improves overall PC stability. With regular use, Reimage will constantly refresh your operating system, which keeps your computer running at its best. Reimage is a fast, easy and safe solution to fixing Windows errors.

What are the different types of errors?

Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3 may be caused by windows system files damage. The corrupted system files entries can be a real threat to the well being of your computer.

Blue Screens AKA Blue Screen of Death

A stop error screen or bug check screen, commonly called a Blue Screen of Death (also BSoD, bluescreen), is caused by a fatal system error and is the error screen displayed by the Microsoft Windows family of Operating Systems upon encountering a critical error, of a non-recoverable nature, that causes the system to «crash.» Stop errors are usually hardware or driver related, causing the computer to stop responding. Bluescreens are typically caused by unsuspected software errors in device drivers.

How to fix Blue Screen of Death?

DLL Errors

A DLL error is the most common Windows error. You’ve likely had a message pop up, at least once or twice, informing you that a DLL error has occurred. If you’re like a lot of people, you probably shut your computer down and rebooted, hoping the problem had gone away. But, what exactly is a DLL error, and how does it affect your computer?

DLL stands for Dynamic Link Library. Essentially, a DLL file is a necessary component of a particular program or application. Without that DLL file, the program or application cannot run properly. Some DLL files are shared by numerous programs, and if a particular DLL file becomes corrupted or is accidentally deleted, it could wreak havoc on how those programs, that are associated with it, are run.

Missing DLL — this means that a call has been made by an application for a particular DLL. However, that DLL could not be found. In some cases this means that the DLL file in questions cannot be found on your system. However, when a DLL is called, the application must provide a path to that library.

A missing DLL error can occur in cases where the actual DLL name does not match the name of the DLL being called. It may also mean that the path being called does not match the actual path of the existing DLL. The DLL may be on your system, but it is possible that it could have an incorrect name or be in the incorrect location. This could be an error with the DLL itself or with the coding of the application causing the error.

Corrupt DLL — a DLL, like any other file or folder on your computer, can become corrupt. They become corrupt for one of a number of reasons. Spyware or virus infections can certainly lead to a number of important files on your system becoming corrupt. If you have manually attempted to alter the contents of a file, then this too can lead to a corruption. An interrupted installation or even an interrupted execution of the DLL may also lead to a corrupt DLL error message.

Reimage and Windows DLL Errors

Sure, you can spend countless hours trying to figure out how to repair your DLL error but wouldn’t it save time to have an automatic program do it?

• Reimage will replace your missing/damaged DLL files with fresh, clean and up-to-date ones
• Reimage will replace ALL DLL files* that are missing and/or damaged — Even those you don’t know about!

Freezing Computer

Computer hanging or freezing occurs when either a program or the whole Operating System ceases to respond to inputs. In the most commonly encountered scenario, a program freezes and all windows belonging to the frozen program become static, and though the mouse cursor still moves on the screen, neither typing on the keyboard nor clicking the mouse produces any effect in the program’s windows. The mouse cursor may also be stuck in a form indicating that it is waiting for some operation to complete, such as an hourglass or a spinning wait cursor. Almost always, the only way to recover from a system freeze is to reboot the machine, usually by power cycling with an on/off or reset button.

What Causes my Windows to Freeze?

The most common but least severe cause of your computer screen freezing is when your system is using all RAM (memory) available — at that particular moment. If so, you’ve got a hardware problem. Our free Reimage scan can tell you how your PC’s RAM compares to a worldwide average. Find out how your PC’s hardware ranks, in under 5 minutes.

How to Fix «Computer Screen Freeze»

Simple Fixes

• This problem might be temporary. Wait a few moments to see if everything starts functioning again.
• Either increase your RAM or start closing programs that are running in the foreground and background of your computer that you don’t need. Follow the following steps:
  1. Press the ‘Alt’, ‘Ctrl’ and ‘Del’ buttons all at the same time, and you should bring up Windows Task Manager.
  2. See if any programs show up in the ‘Applications’ window as not being responsive.
  3. If anything shows, highlight it and click ‘End Task’.
  4. Wait a few seconds, and the non-responsive programs should shut down.

More Complicated Fixes

If the problem isn’t a purely short term, temporary one, then it’s something more serious.

• Fire up your trusty anti-virus program and run a full virus scan now. If you don’t have anti-virus software already, you can download the program from MacAfee, or use Reimage’s free scan to diagnose malware.

An Automatic Solution

Virus Damage

Once your computer has been infected with a virus, it’s no longer the same. After removing it with your anti-virus software, you’re often left with lingering side-effects. The symptoms vary, but the bottom line is the same: Your computer doesn’t work the way it used to. Your favorite programs crash frequently, your registry entries are a mess and even your wallpaper is mysteriously missing.

Why did this happen? You’ve already removed the virus. Shouldn’t the havoc it caused go away, along with it? What about the damage caused to your system? Isn’t it simply erased, along with the malware that caused it?

Technically, your computer might no longer be infected, but that doesn’t mean it’s error-free. Simple removing a virus can actually harm your system.

Invisible Virus Damage

Many Trojans and viruses do not advertise their presence on your computer. Viruses can surreptitiously infiltrate your PC, and both the files and the system will remain operable. Trojans can hide themselves in and secretly corrupt your PC without you suspecting anything is wrong.

This is the reason an antivirus program is so essential.

Anti-virus Programs and Reimage

Reimage is a complementary solution to your anti-virus software. Your anti-virus software is there to detect new threats, terminate them and constantly protect your PC while Reimage is there to heal the damage these viruses have already caused.

That’s why a full system scan of your entire hard drive with a good anti-virus program is always recommended after a Reimage repair.

Reimage Gets Rid of Virus Damage

Reimage uses a number of different virus engines simultaneously and a custom virus engine, developed by our R&D team. We use white lists together with black lists to better detect what should and should not reside in your operating system. This allows us to pinpoint and exterminate harmful components.
The Reimage repair automatically compares system files with the Reimage repository files. Infected files are easily pointed out and then replaced with healthy ones. Infected files locked by viruses or by your operating system will be replaced when you reboot your PC.

Operating System Recovery

A clean reinstallation of Windows is often the only solution when your computer gets too congested to work anymore. However, a thorough reinstall of the Operating System is a time-consuming task that involves lengthy back-ups, long installations, and days to find and reinstall all of your favorite programs.

Reimage is the best alternative to that long, unnecessary process. You can reduce your computer’s idle time and reinstall the Windows Operating System, without resorting to an unnecessary and often risky technique that’s best left to professional technicians.

The Reimage process saves you the time and hassle of having to:

1. Download endless registry cleaners and system optimizers that simply don’t work
2. Figure out if you have a virus
3. Find your Windows installation CD and realize it is outdated or scratched
4. Reinstall Windows and actually «start from scratch»
5. Reinstall broken drivers, software applications, recover license keys and passwords

In most cases, it means you will never need to reinstall Windows again.

One download, a few clicks, and the software will refresh your entire Windows PC.

Reimage will revive your entire system, leaving it error-free and stable, safely and securely.

One click & a free scan gets you started.

How to fix
Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3?

Follow these steps to fix your problem:

1) Download (Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3) repair utility.

2) Install program and click Scan button.

3) Click the Fix Errors button when scan is completed.

4) Restart your computer.

How does it work?

This tool will scan and diagnose, then repairs, your PC with patent
pending technology that fix your windows operating system registry
structure.
basic features: (repairs system freezing and rebooting issues , start-up customization , browser helper object management , program removal management , live updates , windows structure repair.)

Всякий раз, теряя после проверки антивирусом или очередного обновления некий Файл. dll, мы первым делом шерстим интернет в поиске нужной нам версии. При этом нередко ресурсы от раздающих файлы сопровождаются советами об обязательной регистрации его компонентов в реестре. Логика советчиков проста – без регистрации (или после повреждения точек входа) в реестре функции программы для Windows просто будут недоступны. Но все ли из вас понимают смысл процедуры и обязательность к её применению? В статье я хотел бы частично покрыть проблему, возникающую на данном этапе.

Что за RegSvr32?

RegSvr32 – консольная утилита Windows, позволяющая проводить регистрацию (равно как и аннулировать её) у объектов связывания/внедрения. “Под замес”, таким образом, попадают некоторые DLL и ActiveX-управляющие элементы – программируемые компоненты-приложения с интерфейсом на базе OLE, позволяющие включать их в другие программы или приложения. С незапамятных времён они называются ActiveX элементы или “контрольки ActiveX”. Регистрация используется для добавления информации в центральную директорию Windows (то бишь реестр). Информация чаще всего включает в себя “дружественное” название этого компонента, что делает его “более привлекательным” для других приложений, которые могут или будут точно его использовать. Там также есть его полное название и путь к самому файлу, который содержит в себе исполняющий код. Из него Windows и узнаёт о специальных и доступных функциях компонента, а также о том, как эти функции запускать (обращаться за исполнением кода). Нередко регистрация крутится вокруг проблем совместимости с версиями ОС одного производителя, но разных поколений. Ведь информация в реестре Windows всегда будет содержать в себе данные именно о последней версии компонента. Windows за этим, кстати, следит очень трепетно: у компонента версия может только одна. И традиционно, если какая-то функция Windows обнаруживала свою недееспособность, пользователю всегда была доступна процедура регистрации или отмены регистрации сервера таких элементов. На самом деле, такая “деятельность” редко присуща конечным пользователям. Это дела разрабов ПО, но здесь Microsoft явно пошла нам навстречу, оставив возможность изменить отношение системы к какой-то программе вручную. С нашей помощью и помощью RegSvr32.

Порядок пере/регистрации элемента

Вы всегда можете попытаться провести ручную регистрацию DLL или OCX файлов из командной строки от имени администратора:

Обратная операция выполняется с добавлением флага U:

Суть обеих операций – обращение к серверам DllRegisterServer / DllUnregisterServer внутри этих DLL с целью зарегистрировать файл или удалить сведения о нём из реестра. Т. е. создавая в реестре новые пути или, наоборот, удаляя их из него.

Ошибка RegSvr32

У вас 32-х или 64-х разрядная версия?

Здесь путаница в использовании собственных средств системы будет жить, думаю, вечно. Наиболее частая в нашем случае связана именно с попыткой регистрации 32-х битного приложения в 64-битной Windows. Но здесь всё просто. Если вам нужно зарегистрировать библиотечку 32-х в 64-х битной Windows, команда регистрации через regsvr32 примет вид:

Мы, таким образом, заставляем консоль “заработать утилиту” из папки, которая, несмотря на своё название (SysWoW64), как раз и работает с 32-х битными версиями программ. Но стоит ли подключать к решению проблемы с Windows регистратор RegSvr32?

И правда, надо ли?

Модуль ” * ” загружен, но точка точка входа не найдена…

Как видите сами, у файла и возможности-то такой нет. В отличие, например, от этого:

Так что не торопитесь бить тревогу по поводу всплывающего окна с отказом системы в регистрации того или иного файла из консоли, если кто-то в своих советах настаивает на его обязательной регистрации. Вам, видимо, советует человек в том не слишком сведущий, либо не до конца разобравшийся в вашем вопросе. Впрочем, в том вполне может быть вина именно вопрошающего. И, перед тем, как вы приступите к более детальному изучению своего вопроса, присмотритесь к другим “советам”, которые вам, скорее всего, не помогут. И вот почему:

Так в чём проблема?

В вашем случае – не смею догадываться. Однако на моём опыте это был почти всегда либо Кривой либо Несовместимый с данной версией Windows файл. Нередко с этой проблемой будут сталкиваться пользователи именно Windows 10, для большинства из которых W10 – целостная система, время от времени изменяющая свой вид. Ан нет. С полугодичными обновлениями мы получаем зачастую именно обновлённую систему. Со всеми вытекающими – старые версии файлов аннулируются, а прежние функции отпадают либо обновляются вплоть до невозможности запускать на их базе некоторые другие, сторонние программы. Звучит крутовато, но уже простите. Вариант решения проблемы с самим файлом частично предложен в статье Что такое dll, и почему их в Windows не хватает? Однако вопрос с “ошибкой” регистрации вас волновать в описанной форме более, думаю, не должен.

Устранение неполадок с работой утилиты Regsvr32 в Windows

Некоторые пользователи время от времени сталкиваются с надобностью ручной регистрации динамически подключаемых библиотек в операционную систему. Задействовать для этого можно только стандартное средство под названием Regsvr32. Запускается оно через «Командную строку», а все взаимодействия осуществляются с указанием определенных атрибутов. Не всегда работа с утилитой проходит корректно, и на экране появляются различные ошибки. Давайте более детально разберем все известные способы решения неполадок с функционированием Regsvr32 в Windows.

Решаем неполадки с работой утилиты Regsvr32 в Windows

В большинстве случаев сама утилита работает стабильно, а все проблемы связаны с неправильными действиями со стороны пользователя. Однако иногда случаются и более трудные ситуации, решение которых тоже будет представлено в рамках сегодняшней статьи. Начнем ознакомление со способами по порядку, взяв во внимание в первую очередь самый легкое и банальное исправление.

Способ 1: Запуск «Командной строки» от имени администратора

Самая частая причина отказа функционирования Regsvr32 — запуск консоли с правами обычного пользователя. Эта утилита нуждается в повышенном уровне доступа, поскольку редактироваться будут именно системные файлы, поэтому выполнять ее следует только от имени администратора. Это произойдет автоматически в том случае, если «Командная строка» была запущена от имени данной учетной записи. Проще всего сделать это через меню «Пуск», выбрав соответствующий вариант. Если у вы еще не вошли в необходимую учетную запись, сделайте это так, как рассказано в другой статье на нашем сайте по следующей ссылке, а уже затем проверьте результативность произведенных манипуляций.

Способ 2: Перенос файла в «SysWoW64»

Обратим внимание, что использовать этот способ стоит только тем юзерам, кто обладает 64-разрядной операционной системой и пытается зарегистрировать или выполнить другие действия с 32-битным файлом. Дело в том, что по умолчанию практически все динамически подключаемые библиотеки помещаются в директорию «System32», но компоненты, имеющие разрядность 32 бита и находящиеся в 64-разрядной Виндовс, должны быть помещены в папку «SysWoW64», чтобы выполнение определенных действий прошло успешно. Из-за этого возникает надобность произведения следующих действий:

Еще раз уточним, что этот метод подходит только в ситуации, когда рассматриваемая утилита отказывается функционировать с каким-то конкретным файлом в 64-битной операционной системе. В остальных случаях эти действия не принесут вообще никакого результата.

Способ 3: Проверка системы на вирусы

Иногда компьютер может быть заражен вредоносными файлами, которые постепенно распространяются по жесткому диску и влияют на функционирование системных компонентов. На Regsvr32 это тоже может отразиться, поэтому мы настоятельно рекомендуем запустить проверку на вирусы сразу же, как только какие-то проблемы были обнаружены. Детальные инструкции по осуществлению этой операции вы найдете в материале по ссылке ниже, воспользовавшись указанной ниже ссылкой. После завершения сканирования перезагрузите ПК и проверьте, наладилась ли работа утилиты.

Способ 4: Проверка целостности системных файлов

Если во время проверки на вирусы они все же были найдены и удалены, вполне возможно, что угрозы оставили след на системных файлах, повредив их. Иногда это приводит к отказу работы некоторых утилит, в том числе и Regsvr32. Запуск проверки целостности системных файлов доступен с помощью стандартного инструмента SFC, однако иногда и он завершает свою работу, выводя на экран ошибку «Защита ресурсов Windows обнаружила поврежденные файлы, но не может восстановить некоторые из них». Тогда следует обратиться к средству DISM. Оно предназначено для восстановления хранилища компонентов. Только после успешного выполнения этой операции вы можете вернуться к SFC, чтобы закончить сканирование и отладку целостности. Детальнее обо всем этом читайте в отдельном руководстве.

Способ 5: Восстановление Windows

Последний вариант, о котором мы хотим поговорить, заключается в восстановлении Windows до заводских настроек или той резервной копии, когда утилита Regsvr32 еще функционировала корректно. Этот способ самый радикальный и использовать его стоит только в той ситуации, когда другие не принесли должного результата. В выполнении данной операции помогут системные или дополнительные средства. Всю необходимую информацию по теме восстановления вы найдете в отдельной нашей статье.

Теперь вы знаете, что существуют разные причины возникновения неполадок при функционировании Regsvr32 и все они имеют разный алгоритм действий для решения. Однако не стоит забывать, что может попасться поврежденный файл или появятся другие трудности. Обо всем этом сообщают появляющиеся на экране уведомления. Вы можете изучить описание каждого на официальном сайте Microsoft, чтобы быстрее справиться с неполадкой.

Мы рады, что смогли помочь Вам в решении проблемы.

Помимо этой статьи, на сайте еще 11951 инструкций.
Добавьте сайт Lumpics. ru в закладки (CTRL+D) и мы точно еще пригодимся вам.

Отблагодарите автора, поделитесь статьей в социальных сетях.

Опишите, что у вас не получилось. Наши специалисты постараются ответить максимально быстро.

Описание «RegSvr32 failed with exit code 0x3»

Как правило, практикующие ПК и сотрудники службы поддержки знают «RegSvr32 failed with exit code 0x3» как форму «ошибки во время выполнения». Чтобы убедиться, что функциональность и операции работают в пригодном для использования состоянии, разработчики программного обеспечения, такие как Codec Guide, выполняют отладку перед выпусками программного обеспечения. К сожалению, некоторые критические проблемы, такие как ошибка 0x3, часто могут быть упущены из виду.

Ошибка 0x3 также отображается как «RegSvr32 failed with exit code 0x3. Unable to register the DLL/OCX: RegSvr32 failed with exit code 0x3.». Это распространенная ошибка, которая может возникнуть после установки программного обеспечения. Во время возникновения ошибки 0x3 конечный пользователь может сообщить о проблеме в Codec Guide. Команда программирования может использовать эту информацию для поиска и устранения проблемы (разработка обновления). Чтобы исправить такие ошибки 0x3 ошибки, устанавливаемое обновление программного обеспечения будет выпущено от поставщика программного обеспечения.

Что вызывает ошибку 0x3 во время выполнения?

«RegSvr32 failed with exit code 0x3» чаще всего может возникать при загрузке K-Lite. Рассмотрим распространенные причины ошибок ошибки 0x3 во время выполнения:

Ошибка 0x3 Crash — Ошибка 0x3 остановит компьютер от выполнения обычной программной операции. Как правило, это результат того, что K-Lite не понимает входные данные или не знает, что выводить в ответ.

Утечка памяти «RegSvr32 failed with exit code 0x3» — при утечке памяти K-Lite это может привести к медленной работе устройства из-за нехватки системных ресурсов. Повреждение памяти и другие потенциальные ошибки в коде могут произойти, когда память обрабатывается неправильно.

Ошибка 0x3 Logic Error — Компьютерная система создает неверную информацию или дает другой результат, даже если входные данные являются точными. Это происходит, когда исходный код Codec Guide вызывает недостаток в обработке информации.

Как правило, ошибки RegSvr32 failed with exit code 0x3 вызваны повреждением или отсутствием файла связанного K-Lite, а иногда — заражением вредоносным ПО. Основной способ решить эти проблемы вручную — заменить файл Codec Guide новой копией. В некоторых случаях реестр Windows пытается загрузить файл RegSvr32 failed with exit code 0x3, который больше не существует; в таких ситуациях рекомендуется запустить сканирование реестра, чтобы исправить любые недопустимые ссылки на пути к файлам.

Распространенные сообщения об ошибках в RegSvr32 failed with exit code 0x3

Эти проблемы K-Lite, связанные с RegSvr32 failed with exit code 0x3, включают в себя:

• «Ошибка программы RegSvr32 failed with exit code 0x3. «
• «RegSvr32 failed with exit code 0x3 не является приложением Win32.»
• «RegSvr32 failed with exit code 0x3 столкнулся с проблемой и закроется. «
• «Не удается найти RegSvr32 failed with exit code 0x3»
• «RegSvr32 failed with exit code 0x3 не может быть найден. «
• «Проблема при запуске приложения: RegSvr32 failed with exit code 0x3. «
• «RegSvr32 failed with exit code 0x3 не выполняется. «
• «Отказ RegSvr32 failed with exit code 0x3.»
• «Ошибка в пути к программному обеспечению: RegSvr32 failed with exit code 0x3. «

Обычно ошибки RegSvr32 failed with exit code 0x3 с K-Lite возникают во время запуска или завершения работы, в то время как программы, связанные с RegSvr32 failed with exit code 0x3, выполняются, или редко во время последовательности обновления ОС. Важно отметить, когда возникают проблемы RegSvr32 failed with exit code 0x3, так как это помогает устранять проблемы K-Lite (и сообщать в Codec Guide).

RegSvr32 failed with exit code 0x3 Истоки проблем

Проблемы RegSvr32 failed with exit code 0x3 могут быть отнесены к поврежденным или отсутствующим файлам, содержащим ошибки записям реестра, связанным с RegSvr32 failed with exit code 0x3, или к вирусам / вредоносному ПО.

В основном, осложнения RegSvr32 failed with exit code 0x3 связаны с:

• Недопустимый RegSvr32 failed with exit code 0x3 или поврежденный раздел реестра.
• Загрязненный вирусом и поврежденный RegSvr32 failed with exit code 0x3.
• RegSvr32 failed with exit code 0x3 злонамеренно или ошибочно удален другим программным обеспечением (кроме K-Lite).
• RegSvr32 failed with exit code 0x3 конфликтует с другой программой (общим файлом).
• Поврежденная загрузка или неполная установка программного обеспечения K-Lite.

Продукт Solvusoft

Загрузка
WinThruster 2023 — Проверьте свой компьютер на наличие ошибок.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Установить необязательные продукты — WinThruster (Solvusoft) | Лицензия | Политика защиты личных сведений | Условия | Удаление

At first I would like to say that recently I had my entire PC formatted. After that I installed both my Unreal Engine and Visual Studio 2019 at locations that were different from where they were before formatting.

At first I tried to open my project solution and tried building my solution with «F5». But it gave me an error The screenshot of my error. The error stated «Unable to start the program System cannot find the path specified». The path in that error message was the path that existed before formatting my PC.

Alternate link to the error screenshot: https://1drv.ms/u/s!AjZEJUZlPM7yizRT67cRETCHmIwY

Then I Uninstalled and reinstalled my UE4 and from there I launched my project and tried opening the Visual Studio files from the Editor. It did open the files, but the UE4 and the VS were not quite in sync. Some of the details that I hardcoded from VS through my codes were not quite showing up on my Unreal Editor.
I tried closing the UE4 and build my code again this time with F5. But this time The output log shows the line «Specified Path not found» for a temporary duration of time and then quickly it changes to this,

'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32regsvr32.exe'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32ntdll.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32kernel32.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32KernelBase.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32apphelp.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32AcLayers.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32msvcrt.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32user32.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32win32u.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32gdi32.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32gdi32full.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32msvcp_win.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32ucrtbase.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32shlwapi.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32advapi32.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32sechost.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32rpcrt4.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32sfc.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32winspool.drv'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32sfc_os.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32imm32.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32combase.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32ole32.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32kernel.appcore.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32bcryptprimitives.dll'. 
'regsvr32.exe' (Win32): Loaded 'C:WindowsSystem32uxtheme.dll'. 
The thread 0xab4 has exited with code 3 (0x3).
The program '[17104] regsvr32.exe' has exited with code 3 (0x3).

Then I saw couple of fixes here in the stack overflow only, and I tried them out, these fixes are:

1. I went to Tools->Options->Projects and Solutions->Build and Run and I checked, under «On Run, when projects are out of date», the option was set to «Always Build» and under «On Run when build or deployment error occur», the option was set to «Prompt to launch». But nothing was launching and no prompt was showing too.

2. I searched for the exited with code 3 and there I found it said that it means the specific path file is not found and it can be fixed using ILMerge, so I searched ILMerge and from this website (https://www.inogic.com/blog/2018/06/automate-ilmerge-for-workflowsplugins-to-merge-multiple-assemblies-into-one-in-dynamics-365/) I found that Ill have to install ILMerge through the «Package Manager Console» in the «NutGet package manager». and I installed it using these two command lines, Install-Package ILMerge.MSBuild.Task and Install-Package ilmerge. Both of them showed successfully installed. But then I tried F5 again, but its the same.

3. I also went to Tools->Options->Debugging->General and at the very bottom, I checked the box for «Automatically close the console while debugging stops», which was unchecked by default.

4. At last I tried cleaning up my solution from the «Build» option and the I hit F5, this time the output that came was different and it showed that it had errors and it also prompted whether I want to launch the application or not. This is the output that I got,

1>------ Build started: Project: Alpha1, Configuration: Development_Editor x64 ------
1>Creating makefile for Alpha1Editor (no existing makefile)
1>Parsing headers for Alpha1Editor
1>  Running UnrealHeaderTool "D:AlphaGamesAlpha1Alpha1.uproject" "D:AlphaGamesAlpha1IntermediateBuildWin64Alpha1EditorDevelopmentAlpha1Editor.uhtmanifest" -LogCmds="loginit warning, logexit warning, logdatabase error" -Unattended -WarningsAsErrors -abslog="C:UsersUSERAppDataLocalUnrealBuildToolLog_UHT.txt" -installed
1>Reflection code generated for Alpha1Editor in 7.5102243 seconds
1>Building Alpha1Editor...
1>Using Visual Studio 2019 14.26.28806 toolchain (C:Program Files (x86)Microsoft Visual Studio2019CommunityVCToolsMSVC14.26.28801) and Windows 10.0.18362.0 SDK (C:Program Files (x86)Windows Kits10).
1>Building 41 actions with 4 processes...
1>  [1/41] Default.rc2
1>  [2/41] SharedPCH.Engine.ShadowErrors.cpp
1>  [3/41] ColliderMovementComponent.cpp
1>EXEC : error : Unable to rename D:AlphaGamesAlpha1IntermediateBuildWin64UE4EditorDevelopmentAlpha1ColliderMovementComponent.cpp.txt.tmp to D:AlphaGamesAlpha1IntermediateBuildWin64UE4EditorDevelopmentAlpha1ColliderMovementComponent.cpp.txt
1>  [4/41] Collider.cpp
1>  [5/41] Critter.cpp
1>  [6/41] Enemy.cpp
1>  [7/41] FloatingPlatform.cpp
1>  [8/41] EnemyAnimInstance.cpp
1>  [9/41] Weapon.cpp
1>  [10/41] FloorSwitch.cpp
1>  [11/41] MyActor.cpp
1>D:AlphaGamesAlpha1SourceAlpha1MyActor.cpp(50): warning C4996: 'UPrimitiveComponent::AddTorque': Use AddTorqueInRadians instead. Please update your code to the new API before upgrading to the next release, otherwise your project will no longer compile.
1>  [12/41] Item.cpp
1>  [13/41] MainAnimInstance.cpp
1>  [14/41] Pickup.cpp
1>  [15/41] Main.cpp
1>  [16/41] Alpha1GameModeBase.cpp
1>  [17/41] Explosive.cpp
1>  [18/41] Alpha1.cpp
1>  [19/41] Alpha1.init.gen.cpp
1>  [20/41] SpawnVolume.cpp
1>  [21/41] Collider.gen.cpp
1>  [22/41] Critter.gen.cpp
1>  [23/41] ColliderMovementComponent.gen.cpp
1>  [24/41] EnemyAnimInstance.gen.cpp
1>  [25/41] Enemy.gen.cpp
1>  [26/41] Explosive.gen.cpp
1>  [27/41] FloatingPlatform.gen.cpp
1>  [28/41] Alpha1GameModeBase.gen.cpp
1>  [29/41] FloorSwitch.gen.cpp
1>  [30/41] MainAnimInstance.gen.cpp
1>  [31/41] Main.gen.cpp
1>  [32/41] MyActor.gen.cpp
1>  [33/41] Pickup.gen.cpp
1>  [34/41] SpawnVolume.gen.cpp
1>  [35/41] Weapon.gen.cpp
1>EXEC : error : Unable to rename D:AlphaGamesAlpha1IntermediateBuildWin64UE4EditorDevelopmentAlpha1Weapon.gen.cpp.txt.tmp to D:AlphaGamesAlpha1IntermediateBuildWin64UE4EditorDevelopmentAlpha1Weapon.gen.cpp.txt
1>  [36/41] Alpha1_PlayerController.gen.cpp
1>  [37/41] Item.gen.cpp
1>  [38/41] Alpha1_PlayerController.cpp
1>C:Program Files (x86)Microsoft Visual Studio2019CommunityMSBuildMicrosoftVCv160Microsoft.MakeFile.Targets(46,5): error MSB3073: The command "chcp 65001 >NUL && D:UE_4.25UE_4.25EngineBuildBatchFilesBuild.bat Alpha1Editor Win64 Development -Project="D:AlphaGamesAlpha1Alpha1.uproject" -WaitMutex -FromMsBuild" exited with code 6.
1>Done building project "Alpha1.vcxproj" -- FAILED.
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

Please assist me with this issue. I am stuck with this problem for a long time. Tell me I f you want to know anything else or want me to share any other info about this issue. Let me know if you face issues in accessing the error screenshot link that I shared