Ошибка r33 nikon

Well, in most of my earlier posts I have written several memory card errors and their fixes. In this blog, I am going to discuss few Nikon error solutions that will surely help you to fix Nikon error codes effectively.

I have found in many communities and forum websites, that people using Nikon DSLR digital cameras are getting “Nikon error messages”.

This Nikon camera error message is creating havoc to the users. Below you can see the real user’s example.

Let us take a users example:

I’m not sure what is going on, but my D90 is showing “err” on the top display. I’ve removed the battery and turned the camera on and off a few times and no change. I have removed the lens and remounted and still not change.
Does anyone have an idea of what else I should check?

Thank you

Source:https://www.photographytalk.com/forum/nikon-camera-forum-nikon-cameras-lenses-and-accessories/224570-nikon-d90-error-message-on-top-display

Almost all modern Nikon DSLR cameras such as Nikon D90, D80, D60, D40x, D40, D5000, D3000, D200, D300, D300s, D3, D3s and D3x display different kind of Nikon error codes. This can be really problematic – particularly if you are a photographer and you have no idea on how to fix Nikon Camera error message.

Well, you do not need to get worried about it as I have listed some of the Nikon Camera error codes and their fixes in the next section of this blog that you can do it by yourself.

Troubleshooting Nikon Error Codes/Messages

1. Blinking “Err” Message

Blinking Err is one of the most occurring error messages that you might see on the Nikon camera – because it occurs due to several numbers of problems.

The most common reasons are the dust particles that lie between the lens and camera, so you have to simply clean the area carefully and check again.

Another reason could be due to the camera startup problem. In this case, you can turn OFF the camera and remove the battery out of the camera and then re-insert it back and check again.

If you are still seeing the same Nikon error message – then try another lens on the camera in order to identify which part of the camera is faulty. If another lens is working fine, then it is clear that the problem is still in the contacts on the lens creating the issue. In such a situation you can visit the Nikon Service Centre.

2. Blinking “fEE” Message

Blinking “fEE” error message gets displayed only when you are using lenses with an aperture ring. It generally occurs with older lenses and the fEE error message appears if the ring isn’t set to minimum aperture size.

To fix this, simply turn it back to this point – highlighted in orange color. If you are able to lock the aperture ring into its place, then you must do it – it will stop you from thumping it out of the alignment again.

3. Triangle With The letter “F”

Most of the time, this F Error message is limited to Nikon DLSR cameras. This particular error message appears when the camera is not able to communicate with the lens.

To fix F– error message, clean the contacts on the rear of the lens with the help of microfiber cloth and make sure that the lens is locked into its place.

If the problem still persists, then try different lenses to identify whether the problem is in the lens or camera. If you are not able to fix it by yourself, then you can take your camera to the service center.

4. Continuous (-E-) Message/No Memory Card Error message

Continuous (-E-) Message means that there is no memory card installed in the camera. But, if you are getting this error message even when you have inserted a memory card in the camera – then your camera is not able to read the card properly.

In order to fix no memory card error or continuous (-E-) message, turn off the camera and remove the card and clean it (particularly the metal parts that make the connection with the camera). Now insert the card and turn ON the camera and see if this fixes the problem.

Second, make sure that the card type you are using is compatible with your Nikon camera.

Third, ensure that the card is not full – if it is full of photos/videos and there is no space then transfer the photos and videos from the card to PC and delete them from the card.

If you are still facing the same error message, then you must format your memory card. You can either format the card within the camera or on the PC.

Note: Formatting memory card will erase all photos and videos from the card, hence, it is recommended that you must first back up all data of the card to PC and then format it.

5. Blinking “CHA/CHR” Message

Blinking “CHA/CHR” error message means that there is a problem with the memory card. It commonly occurs when you have copied the images from the card.

However, it can be easily fixed by formatting the card within the camera. But if in case the problem is not solved and you are still having the issue, then it is possible that you have a problem with the contacts. Clean the contacts and check the problem is solved or not – if not then send it to the Nikon service center.

6.  “f–” or “f0” Error Message

The “f–” or “f0” Nikon d70 error codes messages occur when the lens is not placed into its place properly.

To troubleshoot Nikon error codes – simply unmount and remount the lens and make sure that it gets placed into its proper place. If you are using the older lens then you may get the error message again because it is possible that older lens may not have electronic contacts, hence, it can’t communicate with the camera.

7.  Stuck On R-Number

This is particularly not the error message, but several numbers of photographers reported that their Nikon camera has stuck on r-number, not allowing them to shoot photos even when the shutter is fully pressed. The r-number could be anything like r36 or any other number. What it actually means – well, it shows that you can take a remaining number of a photo on the buffer and it appears when you half-press the shutter.

But, why your camera is not able to take a photo even when the shutter is completely pressed? Well, there could be several reasons for this problem.

By default, your camera is set to focus on an image before taking the photos, so when you are taking photos in a very dark room or environment and your camera is not able to get proper focus then you will the r-number until it gets stuck to something.

Another reason behind the occurrence of this Nikon error codes is that your camera has been set to self-timer and hence the r-number will get displayed until the timer is complete.

8. “Information” Icon Error Message

There could be 3 reasons for a Nikon camera “information” icon error message (you will see “I” in a circle).

• First, a battery might be discharged – so charge the battery.
• Second, the memory card may be locked or full – to troubleshoot the problem, look for a small toggle switch located just on the side of the card and just swipe it to the “unlocked” position. If your card is full, then move the files from the card to PC.
• Third, it is possible that your camera has spotted that one of the subjects of the photo blinked as and when you take a shot – showing you to take a photo again.

9. Cannot Record Movie Error Message

Cannot record movie error message occurs when your Nikon DSLR camera is not able to transfer the data to the memory card as quickly to record it.

This Nikon r99 error commonly occurs due to memory card – hence, you will require card that has faster read and write process speed. However, this problem can also refer to the camera – but you must first try different memory cards.

10. Shutter Release Error Message

If your Nikon DSLR camera shutter release is jammed then you get shutter release error message.

To fix Nikon d7100 error codes, you must check the shutter button. If there is any object or any other sticky grime that might be jamming the shutter button then, clean the button and try again.

11. This Image Cannot Be Deleted Error Message

An image cannot be deleted error message mostly occurs when the image you are trying to delete is protected through the software in the camera.

To fix Nikon d7200 error codes issue – you have to first remove the protection from the image and then you can delete it.

Recover Data From Nikon DSLR Camera Using Nikon Cemara Recovery Tool

You can repair ‘Nikon error codes’ by following the aforementioned solutions. But there is also a huge possibility to lose media files from Nikon camera card while fixing the Nikon d50 error codes. So, in such circumstances, how do you recover data after fixing Nikon d610 error codes?

Below you can find the solution for Nikon camera data recover!

Nikon DSLR Camera Recovery Tool is a suitable tool that can easily restore lost photos and videos from Sandisk memory card.

It is one of the powerful software that will help you to recover corrupted, inaccessible, lost, deleted or formatted files such as photos, videos and audio files from the card devices.

emid emid
* Free version of the program only scans and previews recoverable items.

Steps To Recover Deleted Data From Nikon Camera Memory Card

Step 1: Select Desired Location

Firstly, select the drive, external media or volume from which you want to recover deleted media files. After selecting, click on ‘Scan‘.

Step 2: Preview Recovered Media Files

Next, you can preview the recoverable media files after the scanning process is completed.

Step 3: Recover Media Files

Lastly, you can select the images, audio, video files you want to restore and click on ‘Recover‘ option to save them at the location you want.

Final Verdict

I hope by reading the above fixes, you are able to resolve Nikon d80 error codes displayed by the Nikon DSLR camera.

But do remember that different model of Nikon camera display different sets of Nikon error codes that are listed above. In case while fixing Nikon d7000 error codes, if you find that the data gets deleted, then you can try the Nikon DSLR Camera Recovery Tool to get them back.

If the above fixes do not help you to solve the issue, then you can carry your Nikon camera to Nikon Service Centre.

Best of luck for troubleshooting Nikon DSLR camera error codes messages!

Ever had a dreaded error code or message flash up on your Nikon DSLR? Or is it happening right now and your search has brought you to this article? Well, either way, here’s a guide to what those codes generally mean, along with a couple of simple solutions to hopefully get you back up and running.

So, we know an error code could mean something is wrong. Don’t panic just yet though. Although the problem can be serious, often the fault is something simple to fix or, in some instances, not even a fault at all. Read on below to find out what your error code means. At the bottom of the page you’ll also find links to a couple of Nikon repair centres, should that be the required course of action.

What does Err mean?

This error code can be the scariest message to encounter as it simply means camera malfunction and can cover a wide range of problems. When it does appear the camera completely locks up. Turning the camera on and off again often clears the error but it can potentially mean anything from dirty contacts, so the lens and camera cannot communicate properly, to a shutter malfunction. It is quite often down to dirty contacts on either the lens mount or lens itself and is fixed with a good deep clean. However, because it can also be more serious it’s always best to speak to Nikon if you are concerned. I had this error come up once when a contact pin on my 1.4x teleconvertor was lose. I only found that out though when the pin fell out whilst I was abroad on a shoot!

Nikon also suggest the following if the Err code flashes up:

• Remove all accessories from the camera.
• Install a freshly charged battery into the camera.
• If your Nikon camera offers resets such as the two-button reset or a hardware reset please follow those instructions provided in the product manual.

[clickToTweet tweet=”See an error code on your Nikon DSLR? All is not lost!” quote=”See an error code on your Nikon DSLR? All is not lost!” theme=”style3″]

What does f- – mean?

This means the lens and camera are not communicating with each other. Usual causes are that either the lens is an older model without electronic contacts (i.e. is not a CPU lens) or it is not fully connected. If it is a CPU lens then remove the lens and re-attach, making sure you fully twist the lens until you hear it click in place.

Triangle with F0 (or another number, i.e. F6)

Also indicates the lens and body are unable to communicate and the camera thinks there is no lens attached. On a non CPU lens it can mean the maximum aperture has not been dialled in correctly. The number next to the letter F is how far from maximum aperture the non CPU lens is – so F6 would mean 6 stops from max aperture. On a G type lens with no aperture ring, try cleaning all the contacts, but if that doesn’t work it might be worth calling Nikon as it may be an issue with the contacts not meeting properly.

F0

Not so much an error code, but if you see F0 on your display it means the lens hasn’t been twisted all the way and locked in place. With modern G lenses you will get F0 appear until the lens is clicked in to position. On older lenses with an aperture ring, you’ll see as you twist the lens in to place the F value will increase until the lens clicks in to position, where it will then revert back to it’s correct, camera set, aperture value.

What does FEE mean?

If you only use G type lenses you’ll never see this error message as it indicates the aperture ring is not set to the minimum aperture. The fix is easy, just set the aperture ring back to minimum and lock it in place. There is usually an aperture ring lock to stop you accidentally twisting it, it’s a small orange notch on a switch, and the lenses smallest aperture will be marked in orange as well to help remind you.

 – E –

Not really a warning message, but -E- simply means there is no memory card in the camera. If however you get this message and there IS a card in the camera, try formatting the card in camera (NOT in your computer), and taking it out and re-inserting to make sure it is properly seated. If the problem still persists, try another card as per below. If that doesn’t work it’s worth contacting Nikon as you may have a bent pin in the card slot. It’s been known to happen but be warned, it isn’t always the cheapest of things to fix!

CHA/CHR

If you see CH/CHR it means there is a problem with the memory card. It’s always a good idea to format your memory card in camera after you have copied the images across to your computer. Generally speaking, memory card problems seem to crop up more often with people who do not do an in camera format of the card. It’s also worth removing and re-inserting the card. As with the -E- message, worst case scenario is that there is a bent pin in the cameras card slot.

Additional reading: how to add your copyright to photo EXIF

What does ‘r’ followed by a number mean?

This is often mistaken for an error code. I’ve had many people ask me what r12 or r04 means when they half press the shutter release on their DSLR. The good news is, this does not signify a problem. It is simply the camera telling you how many shots you have left before the camera buffer fills.

My camera won’t take a photo when I press the shutter all the way down

This could genuinely be a fault with the camera but also, as silly as it sounds, it could be that you have the camera set to focus priority and you’re trying to take a photo when the camera hasn’t focused on anything. To double check this isn’t the case, go into the autofocus menu of your camera, navigate to AF-C and AF-S priority selection and see what mode is set in there. If it’s on focus priority, the camera won’t release the shutter until it has locked on to something.

What if I can’t fix the problem myself?

It’s always a worry when an error code comes up on any bit of kit. Even if it goes away again it’s always better to get it looked at just to be safe. Nikon will usually ask you what settings you had the camera on and what other equipment you were using at the time so always try to remember to make a note of that info, so you can pass it on to them. That way they’ll potentially be able to find the fault sooner. If needed, supply them with the other kit that was used when the fault developed. I once read on a forum about a pro sports photographer who had a D3 and a 400mm which gave an ERR code when combined together. Both the camera and lens worked fine with all other cameras/lenses but together they just did not want to play. So both had to be sent in to find the fault.

How do I contact my local Nikon service centre?

Head over to the Nikon website for your territory to find where your local service centre is located. To get you there a little quicker, you can use these link:

Nikon Europe repair centre

Nikon USA repair centre

I hope you never find yourself having to look up what the Nikon DSLR error codes mean, but if you do, and you find your way here, I hope this article helped!

Want to learn more?
Get more information to help you take better photos in my shooting tips and advice archives.

Немногие вещи так же расстраивают, как появление сообщения об ошибке на ЖК-дисплее цифровой камеры DSLR или в электронном видоискателе. Однако, прежде чем вы будете слишком расстроены, сделайте глубокий вдох. Преимущество сообщения об ошибке заключается в том, что ваша камера дает вам подсказки относительно проблемы, которая лучше, чем отсутствие сообщения об ошибке — и никаких подсказок — вообще.

Восемь приведенных здесь советов помогут вам устранить неполадки в сообщениях об ошибках камеры Nikon DSLR.

Сообщение об ошибке ERR

Если вы видите «ERR» на вашем ЖК-дисплее или в электронном видоискателе, вероятно, у вас возникла одна из трех проблем. Во-первых, кнопка спуска затвора может быть неправильно нажата. Во-вторых, камера не смогла захватить изображение с помощью настроек ручной экспозиции; попробуйте изменить настройки или использовать автоматические настройки. В-третьих, камера Nikon, возможно, испытала ошибку при запуске. Извлеките аккумулятор и карту памяти не менее 15 минут и снова включите камеру.

F— Сообщение об ошибке

В большинстве случаев это сообщение об ошибке ограничено камерами Nikon DSLR, потому что это связано с ошибкой объектива. В частности, сообщение об ошибке F— указывает, что объектив и камера не сообщаются. Проверьте объектив, чтобы он зафиксировался на месте. Если вы не можете сделать этот конкретный объектив, попробуйте другой объектив, чтобы увидеть, продолжает ли сообщение F— ошибка. Затем вы узнаете, связана ли проблема с оригинальным объективом или камерой.

Сообщение об ошибке FEE

Сообщение об ошибке FEE на фотокамере Nikon DSLR указывает, что камера не может снимать фотографию с выбранной диафрагмы. Поверните кольцо ручной диафрагмы до наивысшего числа, которое должно исправить сообщение об ошибке. Вам может потребоваться, чтобы камера автоматически выбирала диафрагму для съемки фотографии при правильной экспозиции.

Сообщение об ошибке «Информация»

Если вы видите «i» в круге, это сообщение об ошибке, указывающее одну из трех вероятных ошибок. Во-первых, батарея может быть разряжена; попробуйте зарядить его. Во-вторых, карта памяти может быть заполнена или заблокирована. Найдите небольшой тумблер на боковой стороне карты и переверните его в «разблокированное» положение, чтобы устранить проблему. В-третьих, камера, возможно, обнаружила, что один из объектов фотографии моргнул, когда фотография была снята, что позволяет снова снимать фотографию.

Нет сообщения об ошибке карты памяти

Если у вас установлена ​​карта памяти, сообщение об ошибке «Нет карты памяти» может иметь несколько разных причин. Во-первых, убедитесь, что тип карты памяти совместим с вашей камерой Nikon. Во-вторых, карта может быть полной, то есть вам нужно будет загрузить фотографии на компьютер. В-третьих, карта памяти может быть неисправна или, возможно, была отформатирована с помощью другой камеры. Если это так, вам может потребоваться переформатировать карту памяти с помощью этой камеры. Имейте в виду, что форматирование карты памяти стирает все данные, хранящиеся на ней.

Запись видеоролика

Сообщение об ошибке «Невозможно записать видео» обычно означает, что ваша Nikon DSLR не может передать данные на карту памяти достаточно быстро, чтобы записать ее. Это почти всегда проблема с картой памяти; вам понадобится карта памяти с более быстрой скоростью записи. Это сообщение об ошибке также может касаться проблемы с камерой, но сначала попробуйте другую карту памяти.

Сообщение об ошибке спуска затвора

Сообщение об ошибке спуска затвора с вашей фотокамерой Nikon DSLR указывает на застрявшую затвор. Проверьте кнопку спуска затвора для любых посторонних предметов или любой липкой грязи, которая может заклинить кнопку спуска затвора. Очистите кнопку и повторите попытку.

Сообщение об ошибке «Изображение не может быть удалено»

Изображение, которое вы пытаетесь удалить, было защищено программным обеспечением в камере. Прежде чем удалять его, вам нужно удалить метку защиты.

Просто помните, что различные модели камер Nikon могут предоставлять различные сообщения об ошибках, чем показано здесь. Если вы видите сообщения об ошибках камеры Nikon, которые здесь не указаны, обратитесь к руководству пользователя камеры Nikon для получения списка других сообщений об ошибках, характерных для вашей модели камеры.

После прочтения этих советов, если вы все еще не можете решить проблему, указанную в сообщении об ошибке камеры Nikon, вам может потребоваться снять камеру в центр ремонта. Ищите надежный центр ремонта камеры, пытаясь решить, где взять камеру.