Ошибка volmgr 162

Error code 162 — Real time clock.

Any date or time errors? Or more simply just the time and/or date being wrong.

How is the system clock being updated/synched? Default values?

Try another new CMOS battery.

If the problems continue then run «sfc /scannow» and «dism».

https://www.lifewire.com/how-to-use-sfc-scannow-to-repair-windows-system-files-2626161

How to use DISM command tool to repair Windows 10 image | Windows Central

Noted that you used Event Viewer.

Also look in Reliability History. Much more user friendly and the timeline format may reveal some other clues about the problem.

Thank you for your reply.

No time/date errors as far as I’m aware.

I’m not quite sure what you mean by this. Clock seems to be synched fine.

Will try CMOS if the problem persists.

I have done both of these scans recently.

I have taken a look at Reliability History. Most notable events are Windows and some basic programs crashing 9 times the in past 5 days I have had the pc running. One crash is defined by «Hardware error» and the other 8 are defined by «Unexpected shutdown». My Windows is in Finnish so these translations might not be exact.

Edit: Another problem related to this, most likely, happens when watching Youtube on Chrome. The page crashes with an error code STATUS_ACCESS_VIOLATION.

Swapping the CMOS battery is/was just a means to eliminate one potential cause.

Check Task Manager and Task Scheduler. Look for some app or utility being launched at start up or perhaps being triggered later by Task Scheduler.

Could be some buggy or corrupted code that leads to the crashes.

= = = =

This PSU:

Did you use or reuse PSU cables from any other PSUs? Unexpectected shutdowns are likely power related.

Increasing numbers of errors and varying error in Reliability History and Event Viewer make the PSU suspect. Even if a new PSU.

Reading back I am wondering if the PSU is able to provide sufficient power at peak demands.

This PSU?

Total up the power demand for all system components. If a component has a range of wattages use the highest value.

Or use one of the calculators in the following link:

https://www.tomshardware.com/reviews/best-psus,4229.html

= = = =

One other immediate thing you can do is to shut down, unplug, and open the case.

Double check all connections and applicable configurations for each installed component.

Refer to the motherboard’s User Guide/Manual and other relevent component documents to ensure that all are indeed correctly connected and configured. Details matter.

Verify by sight and feel that all connectors, cards, RAM, jumpers, and case connections are fully and firmly in place. Look for any pinched, kinked wires. Cracked connectors. Bare conductor showing. No sag in the GPU.

No one want to force a connection especially with a new build. So what feels tight and connected may not actually be tight and connected.

Unplug and replug a few times as necessary to securely seat everything. Look for debris in sockets and misaligned plugs. Take your time. You may discover that suddenly some connection is easier and smoother.

Hey so this is on a semi fresh install(About 2 weeks ago) that I keep getting these crashes whenever I just leave it to idle during the day,
I don’t get to catch the blue screens but I’ll comeback to a log on screen and know that it’s crashed by looking at event viewer.

— <Event xmlns=»

«>

— <System>

<Provider Name=»volmgr» />

<EventID Qualifiers=»4«>162</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keywords>0x80000000000000</Keywords>

<TimeCreated SystemTime=»2022-09-08T17:24:14.1208284Z» />

<EventRecordID>16526</EventRecordID>

<Correlation />

<Execution ProcessID=»4» ThreadID=»316» />

<Channel>System</Channel>

<Computer>Vince-Desktop</Computer>

<Security />

</System>

— <EventData>

<Data>DeviceHarddiskVolume6</Data>

<Binary>000000000100000000000000A2000400FD4B00000000000000000000000000000000000000000000</Binary>

</EventData>

</Event>

And immediately this one:

— <Event xmlns=»

«>

— <System>

<Provider Name=»Microsoft-Windows-Kernel-Power» Guid=»{331c3b3a-2005-44c2-ac5e-77220c37d6b4}» />

<EventID>41</EventID>

<Version>8</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000400000000002</Keywords>

<TimeCreated SystemTime=»2022-09-08T17:24:14.3027959Z» />

<EventRecordID>16529</EventRecordID>

<Correlation />

<Execution ProcessID=»4» ThreadID=»8» />

<Channel>System</Channel>

<Computer>Vince-Desktop</Computer>

<Security UserID=»S-1-5-18» />

</System>

— <EventData>

<Data Name=»BugcheckCode«>307</Data>

<Data Name=»BugcheckParameter1«>0x0</Data>

<Data Name=»BugcheckParameter2«>0x501</Data>

<Data Name=»BugcheckParameter3«>0x500</Data>

<Data Name=»BugcheckParameter4«>0xfffff8074a105330</Data>

<Data Name=»SleepInProgress«>0</Data>

<Data Name=»PowerButtonTimestamp«>0</Data>

<Data Name=»BootAppStatus«>0</Data>

<Data Name=»Checkpoint«>0</Data>

<Data Name=»ConnectedStandbyInProgress«>false</Data>

<Data Name=»SystemSleepTransitionsToOn«>0</Data>

<Data Name=»CsEntryScenarioInstanceId«>0</Data>

<Data Name=»BugcheckInfoFromEFI«>false</Data>

<Data Name=»CheckpointStatus«>0</Data>

<Data Name=»CsEntryScenarioInstanceIdV2«>0</Data>

<Data Name=»LongPowerButtonPressDetected«>false</Data>

</EventData>

</Event>

There’s also hyperVisor errors but I have it disabled as I kept getting DPC watchdog violations or hypervisor crashes multiple times a day so I just leave it off and that’s what the error states
«Hypervisor launch failed; Either SVM not present or not enabled in BIOS.»

Full Specs:
Win 11 Pro x64
Mobo: Asrock X570 Phantom Gaming 4
CPU: Ryzen 5 3600
GPU: Asus Strix RTX 3070 Ti
RAM: Gskill Flare X F4-3200C16D-16GFX
Hard Drives: Boot — Samsung SSD 860 EVO 500GB 500.1 GB(90% Life)
Storage Drives — Samsung SSD 860 EVO 1TB 1000.2 GB(98% Life)
KINGSTON SH103S3120G 120.0 GB(88% Life)
ST500DM002-1BD142 500.1 GB(Seagate 7200RPM)(Good Smart Status)

I can’t figure out if its the RAM or the two older drives(Kingston and Seagate), I plan to replace them int he future but after some cursory searches I’ve found that the volmgr code is linked to RAM? Or is it not in this issue.
Any help is appreciated.

Try running userbenchmark.com and post a link to your results here if you can. It sounds like the ram is having a issue. And in most cases with windows 11 this error is created when xmp isn’t enabled or using the wrong profile. Or docp for amd systems isn’t enabled again causing ram issues

I should have said this in the initial post, I have enabled the XMP profile or this RAM, it crashes with or without it enabled and more if I enable SVM.
I have IOMMU enabled and tried disabling it but got the same errors as well. I leave it enabled because Ideally I plan to switch back to Linux once i resolve this hardware issue and figure out all my workflow replacements.

Userbench link

I am aware of the slight bottle neck on my 3070 with the R5 3600 and intend to deal with that by getting a more recent Ryzen.

You need to update the bios, the bios has several stability updates that correct a lot of crashing issues.

I should have said this in the initial post, I have enabled the XMP profile or this RAM, it crashes with or without it enabled and more if I enable SVM.
I have IOMMU enabled and tried disabling it but got the same errors as well. I leave it enabled because Ideally I plan to switch back to Linux once i resolve this hardware issue and figure out all my workflow replacements.

Userbench link

I am aware of the slight bottle neck on my 3070 with the R5 3600 and intend to deal with that by getting a more recent Ryzen.

The system crash at all 😛 n bios