Ошибки kyocera fs 1920

Indicators and Messages

4-7

Maintenance Messages

The following table lists maintenance messages that you can deal with by yourself. If Call service 
person appears, turn off the printer, disconnect the power cord, and contact your Kyocera Mita dealer. 

Message

Corrective Action

Add paper (paper source)

The paper has run out. Supply paper according to the paper source displayed (paper 
cassette, MP tray, or option paper feeder).
Messages indicating the printer status (Ready, Please wait, Processing

†

, 

Waiting, and FormFeed Time Out

†

) are displayed alternately.

Call service
    F000

The ATTENTION indicator turns on and the READY indicator goes off. Indicates a 
problem with the controller and the operator panel. Call a service person. The printer 
does not operate when this message is displayed.

Call service
    ####

The ATTENTION indicator turns on. Indicates a controller error. Call a service person. 
The printer does not operate when this message is displayed.

Call service
    ####:0123456

The ATTENTION indicator turns on. Indicates a mechanical error. Or an unsupported 
option hardware has been installed. Be sure to install proper option hardware 
compatible with the FS-1920. Call a service person. 0123456 indicates the number of 

printed pages.

Cassette # 
not loaded

The paper cassette may not be propery inserted into the printer. Reinsert the paper 
cassette. The paper source number (#) is only displayed when there is an option paper 

feeder installed.

Check waste
toner box

The waste toner box is not installed. After installing the waste toner box, you should 
be able to print. Replace the old waste toner box with the new one which is included 
in the toner kit. The message will also be shown if the waste toner box has become full. 
The waste toner box should be replaced when the message display eventually shows 
Toner low. See 

Clean printer 
Press GO

Please clean the inside of the printer. See 

This message will be displayed when replacing the toner container after the message 
Replace toner TK-50 is displayed. After cleaning the inside of the printer, press 

the GO key and the printer will be ready for printing.
If Auto Continue is set to On, printing will be automatically resumed after a preset 

period of time.

Close duplexer 
rear cover

Open the option duplexer rear cover, then close tightly.

Close 
left cover

Open the left cover, then close tightly.

Close sorter 
rear cover

Open the sorter rear cover, then close tightly.

Close 
stacker cover

Open the stacker cover, then close tightly.

Close 
top cover

Open the top cover, then close tightly.

Close paper 
transfer unit

Open the paper transfer unit, then close tightly.

Duplex disabled
Press GO

You attempted to print with a paper size and paper type that cannot be used for 
duplex printing. Press the GO key to print onto one-side of the paper only.

:Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.

Table 4-4 

;Ò

;Ò

;Ò

Ошибки Kyocera ECOSYS M2030dn

Ошибки Kyocera ECOSYS M2030pn

Ошибки Kyocera ECOSYS M2035dn

Ошибки Kyocera ECOSYS M2040dn

Ошибки Kyocera ECOSYS M2135dn

Ошибки Kyocera ECOSYS M2530dn

Ошибки Kyocera ECOSYS M2535dn

Ошибки Kyocera ECOSYS M2540dn

Ошибки Kyocera ECOSYS M2540dw

Ошибки Kyocera ECOSYS M2635dn

Ошибки Kyocera ECOSYS M2635dw

Ошибки Kyocera ECOSYS M2640idw

Ошибки Kyocera ECOSYS M3040dn

Ошибки Kyocera ECOSYS M3040idn

Ошибки Kyocera ECOSYS M3145dn

Ошибки Kyocera ECOSYS M3145idn

Ошибки Kyocera ECOSYS M2735dw

Ошибки Kyocera ECOSYS M3540dn

Ошибки Kyocera ECOSYS M3540idn

Ошибки Kyocera ECOSYS M3550idn

Ошибки Kyocera ECOSYS M3560idn

Ошибки Kyocera ECOSYS M3645dn

Ошибки Kyocera ECOSYS M3645idn

Ошибки Kyocera ECOSYS M3655idn

Ошибки Kyocera ECOSYS M3660idn

Ошибки Kyocera ECOSYS M3860idn

Ошибки Kyocera ECOSYS M3860idn

Ошибки Kyocera ECOSYS M4125idn

Ошибки Kyocera ECOSYS M4132idn

Ошибки Kyocera ECOSYS M5521cdn

Ошибки Kyocera ECOSYS M5521cdw

Ошибки Kyocera ECOSYS M5526cdn

Ошибки Kyocera ECOSYS M5526cdw

Ошибки Kyocera ECOSYS M6026cdn

Ошибки Kyocera ECOSYS M6026cidn

Ошибки Kyocera ECOSYS M6030cdn

Ошибки Kyocera ECOSYS M6035cidn

Ошибки Kyocera ECOSYS M6230cidn

Ошибки Kyocera ECOSYS M6235cidn

Ошибки Kyocera ECOSYS M6526cdn

Ошибки Kyocera ECOSYS M6526cidn

Ошибки Kyocera ECOSYS M6530cdn

Ошибки Kyocera ECOSYS M6535cidn

Ошибки Kyocera ECOSYS M6630cidn

Ошибки Kyocera ECOSYS M6635cidn

Ошибки Kyocera ECOSYS M8124cidn

Ошибки Kyocera ECOSYS M8130cidn

Ошибки Kyocera ECOSYS P2035d

Ошибки Kyocera ECOSYS P2040dn

Ошибки Kyocera ECOSYS P2040dw

Ошибки Kyocera ECOSYS P2135d

Ошибки Kyocera ECOSYS P2135dn

Ошибки Kyocera ECOSYS P2235dn

Ошибки Kyocera ECOSYS P2235dw

Ошибки Kyocera ECOSYS P3045dn

Ошибки Kyocera ECOSYS P3050dn

Ошибки Kyocera ECOSYS P3055dn

Ошибки Kyocera ECOSYS P3060dn

Ошибки Kyocera ECOSYS P3145dn

Ошибки Kyocera ECOSYS P3150dn

Ошибки Kyocera ECOSYS P3155dn

Ошибки Kyocera ECOSYS P3160dn

Ошибки Kyocera ECOSYS P3260dn

Ошибки Kyocera ECOSYS P4035dn

Ошибки Kyocera ECOSYS P4040dn

Ошибки Kyocera ECOSYS P5021cdn

Ошибки Kyocera ECOSYS P5021cdw

Ошибки Kyocera ECOSYS P5026cdn

Ошибки Kyocera ECOSYS P5026cdw

Ошибки Kyocera ECOSYS P6021cdn

Ошибки Kyocera ECOSYS P6026cdn

Ошибки Kyocera ECOSYS P6030cdn

Ошибки Kyocera ECOSYS P6035cdn

Ошибки Kyocera ECOSYS P6130cdn

Ошибки Kyocera ECOSYS P6230cdn

Ошибки Kyocera ECOSYS P6235cdn

Ошибки Kyocera ECOSYS P7035cdn

Ошибки Kyocera ECOSYS P7040cdn

Ошибки Kyocera ECOSYS P7240cdn

Ошибки Kyocera ECOSYS P8060cdn

Ошибки Kyocera FS-C8600DN

Ошибки Kyocera FS-C8650DN

Ошибки Kyocera FS1016MFP

Ошибки Kyocera FS1018MFP

Ошибки Kyocera FS1020MFP

Ошибки Kyocera FS1024MFP

Ошибки Kyocera FS1025MFP

Ошибки Kyocera FS1028MFP

Ошибки Kyocera FS1030MFP

Ошибки Kyocera FS1035MFP

Ошибки Kyocera FS1040

Ошибки Kyocera FS1050

Ошибки Kyocera FS1060DN

Ошибки Kyocera FS1100

Ошибки Kyocera FS1110

Ошибки Kyocera FS1116MFP

Ошибки Kyocera FS1118MFP

Ошибки Kyocera FS1120

Ошибки Kyocera FS1120MFP

Ошибки Kyocera FS1124MFP

Ошибки Kyocera FS1125MFP

Ошибки Kyocera FS1128MFP

Ошибки Kyocera FS1130MFP

Ошибки Kyocera FS1135MFP

Ошибки Kyocera FS1200

Ошибки Kyocera FS1220MFP

Ошибки Kyocera FS1300D

Ошибки Kyocera FS1320D

Ошибки Kyocera FS1320MFP

Ошибки Kyocera FS1325MFP

Ошибки Kyocera FS1350DN

Ошибки Kyocera FS1370DN

Ошибки Kyocera FS1500

Ошибки Kyocera FS6020

Ошибки Kyocera FS6025MFP

Ошибки Kyocera FS6025MFPB

Ошибки Kyocera FS6030MFP

Ошибки Kyocera FS6500

Ошибки Kyocera FS6525MFP

Ошибки Kyocera FS6530MFP

Ошибки Kyocera FS6700

Ошибки Kyocera FS6900

Ошибки Kyocera FS6950DN

Ошибки Kyocera FS8000CD

Ошибки Kyocera FS8000CN

Ошибки Kyocera FS8100DN

Ошибки Kyocera TASKalfa 180

Ошибки Kyocera TASKalfa 1800

Ошибки Kyocera TASKalfa 1801

Ошибки Kyocera TASKalfa 181

Ошибки Kyocera TASKalfa 205c

Ошибки Kyocera TASKalfa 220

Ошибки Kyocera TASKalfa 2200

Ошибки Kyocera TASKalfa 2201

Ошибки Kyocera TASKalfa 221

Ошибки Kyocera TASKalfa 2420w

Ошибки Kyocera TASKalfa 2460ci

Ошибки Kyocera TASKalfa 2470ci

Ошибки Kyocera TASKalfa 250ci

Ошибки Kyocera TASKalfa 2510i

Ошибки Kyocera TASKalfa 2520i

Ошибки Kyocera TASKalfa 255

Ошибки Kyocera TASKalfa 2550ci

Ошибки Kyocera TASKalfa 2551ci

Ошибки Kyocera TASKalfa 2552ci

Ошибки Kyocera TASKalfa 2553ci

Ошибки Kyocera TASKalfa 255b

Ошибки Kyocera TASKalfa 255c

Ошибки Kyocera TASKalfa 265ci

Ошибки Kyocera TASKalfa 300ci

Ошибки Kyocera TASKalfa 300i

Ошибки Kyocera TASKalfa 3010i

Ошибки Kyocera TASKalfa 3011i

Ошибки Kyocera TASKalfa 305

Ошибки Kyocera TASKalfa 3050ci

Ошибки Kyocera TASKalfa 3051ci

Ошибки Kyocera TASKalfa 306ci

Ошибки Kyocera TASKalfa 307ci

Ошибки Kyocera TASKalfa 308ci

Ошибки Kyocera TASKalfa 3212i

Ошибки Kyocera TASKalfa 3252ci

Ошибки Kyocera TASKalfa 3253ci

Ошибки Kyocera TASKalfa 3500i

Ошибки Kyocera TASKalfa 3501i

Ошибки Kyocera TASKalfa 350ci

Ошибки Kyocera TASKalfa 3510i

Ошибки Kyocera TASKalfa 3511i

Ошибки Kyocera TASKalfa 3550ci

Ошибки Kyocera TASKalfa 3551ci

Ошибки Kyocera TASKalfa 3552ci

Ошибки Kyocera TASKalfa 3553ci

Ошибки Kyocera TASKalfa 356ci

Ошибки Kyocera TASKalfa 358ci

Ошибки Kyocera TASKalfa 4002i

Ошибки Kyocera TASKalfa 4003i

Ошибки Kyocera TASKalfa 400ci

Ошибки Kyocera TASKalfa 4012i

Ошибки Kyocera TASKalfa 4052ci

Ошибки Kyocera TASKalfa 4053ci

Ошибки Kyocera TASKalfa 406ci

Ошибки Kyocera TASKalfa 408ci

Ошибки Kyocera TASKalfa 420i

Ошибки Kyocera TASKalfa 4500i

Ошибки Kyocera TASKalfa 4501i

Ошибки Kyocera TASKalfa 4550ci

Ошибки Kyocera TASKalfa 4551ci

Ошибки Kyocera TASKalfa 4820w

Ошибки Kyocera TASKalfa 5002i

Ошибки Kyocera TASKalfa 5003i

Ошибки Kyocera TASKalfa 500ci

Ошибки Kyocera TASKalfa 5052ci

Ошибки Kyocera TASKalfa 5053ci

Ошибки Kyocera TASKalfa 508ci

Ошибки Kyocera TASKalfa 520i

Ошибки Kyocera TASKalfa 5500i

Ошибки Kyocera TASKalfa 5501i

Ошибки Kyocera TASKalfa 550c

Ошибки Kyocera TASKalfa 552ci

Ошибки Kyocera TASKalfa 5550ci

Ошибки Kyocera TASKalfa 5551ci

Ошибки Kyocera TASKalfa 6002i

Ошибки Kyocera TASKalfa 6003i

Ошибки Kyocera TASKalfa 6052ci

Ошибки Kyocera TASKalfa 6053ci

Ошибки Kyocera TASKalfa 620

Ошибки Kyocera TASKalfa 6500i

Ошибки Kyocera TASKalfa 6501i

Ошибки Kyocera TASKalfa 650c

Ошибки Kyocera TASKalfa 6550ci

Ошибки Kyocera TASKalfa 6551ci

Ошибки Kyocera TASKalfa 7002i

Ошибки Kyocera TASKalfa 7003i

Ошибки Kyocera TASKalfa 7052ci

Ошибки Kyocera TASKalfa 7353ci

Ошибки Kyocera TASKalfa 750c

Ошибки Kyocera TASKalfa 7550ci

Ошибки Kyocera TASKalfa 7551ci

Ошибки Kyocera TASKalfa 8000i

Ошибки Kyocera TASKalfa 8001i

Ошибки Kyocera TASKalfa 8002i

Ошибки Kyocera TASKalfa 8003i

Ошибки Kyocera TASKalfa 8052ci

Ошибки Kyocera TASKalfa 820

Ошибки Kyocera TASKalfa 8353ci

Ошибки Kyocera TASKalfa 9002i

Ошибки Kyocera TASKalfa 9003i

Indicators and Messages

4-10

Error Messages

The following table lists error messages that can be dealt with by the user.

Message Corrective Action

File not found

Press GO

VMB: A VMB tray that was specified for output does not contain any jobs, or the VMB

tray is not being used. Confirm the VMB tray.

If Auto Continue is set to On, printing will be automatically resumed after a preset

period of time. See Auto Continue Setting on page 1-105.

Format error

Memory card

This message appears when the printer is in the ready state and the CompactFlash

(memory) card is not formatted, and therefore cannot be read or written. Follow the

procedure in Formatting a Storage Device on page 1-88 to format the card.

Format error

Hard disk

Initialization (formatting) of the Microdrive is required. Initialize the Microdrive.

(See Operating the Storage Device on page 1-81.)

Hard disk err ##

Press GO

Look at the error code given in place of ## and refer to the corresponding description

given below.

01: Microdrive format error. If this error recurs even if the power has been turned off

and then on, reformat the Microdrive.

02: The disk system is not installed. Recheck the requirements for using the system

and the devices.

04: There is no available Microdrive space. Delete unnecessary files, etc., in order to

free up space.

05: The specified file does not exist in the Microdrive.

06: There is no memory available to the Microdrive system. Increase the available

memory.

10: Formatting is not possible because host data is being spooled on the Microdrive.

Wait until the Microdrive is ready, and then format.

85: VMB; Alias error (the alias setting was lost, or the VMB tray corr esponding to

the alias does not exist). Set the alias again.

97: Code job; The number of permanent code job reached the limit value, and no

more can be saved. Either delete some unnecessary jobs, etc., or increase the

limit.

99: A print job for the specified ID does not exist in the Microdrive.

I/F occupied This message is displayed when you attempt to use the printer’s operator panel to

change the environmental settings on the interface from which data are presently

being received.

ID error The ID entered for a private job, or a stored job is not correct. Check the ID that is set

using the printer driver.

Insert the same

memory card

You have inserted the wrong CompactFlash (memory) card when the Insert again

message was displayed. Remove the wrong CompactFlash card from the printer’s

CompactFlash card slot and insert the correct CompactFlash card. The printer again

reads it from the beginning of the data.

KPDL error ##

Press GO

Current print processing cannot continue. To print out an error report, display >

Print KPDL errs from the mode select menu, and select On. Press the GO key to

resume printing. You can abandon printing by the CANCEL key.

If Auto Continue is set to On, printing will be automatically resumed after a preset

period of time. See Auto Continue Setting on page 1-105.

:Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.

Table 4-5

;Ò

;Ò

;Ò

;Ò

The most common error codes.

Error
F070	Description: Flash ROM error CPU U1 of engine board could not write data failed to flash ROM U2. Write sequence to flash ROM is not successful. Verify error. (Written data does not match the original data.)
2000	Description: Main motor error The main motor is overloaded
6400	Description: Zero cross signal error The ZCROSS signal does not reach the engine board within 3 seconds after power on.
0100	Description: Engine board EEPROM (socket mount) Detecting EEPROM communication error.
2600	Description: Optional bulk paper feeder PF-8E motor error Motor error in the optional bulk paper feeder PF-8E.
F070	Description: Flash ROM error CPU U1 of engine board could not write data failed to flash ROM U2. Write sequence to flash ROM is not successful. Verify error. (Written data does not match the original data.)
2000	Description: Main motor error The main motor is overloaded
6400	Description: Zero cross signal error The ZCROSS signal does not reach the engine board within 3 seconds after power on.
0100	Description: Engine board EEPROM (socket mount) Detecting EEPROM communication error.
2600	Description: Optional bulk paper feeder PF-8E motor error Motor error in the optional bulk paper feeder PF-8E.