- Kassir
- Сообщения:56
- Зарегистрирован:22 фев 2013, 17:47
-
Благодарил (а):
0 -
Поблагодарили:
0 - Контактная информация:
Принтер Zebra S4M стал выдавать ошибку Ribbon out. При этом принтер отказывается идти в режим калибровки.
- 675946
- Сообщения:54
- Зарегистрирован:22 фев 2013, 12:13
-
Благодарил (а):
0 -
Поблагодарили:
0 - Контактная информация:
Re: Zebra S4M пишет Ribbon out
Сообщение
675946 » 05 июл 2013, 14:07
Может у вас датчик поломался и его просто нужно заменить, кажется это может помочь.
- Anarhist
- Сообщения:53
- Зарегистрирован:19 фев 2013, 17:20
-
Благодарил (а):
0 -
Поблагодарили:
0 - Контактная информация:
Re: Zebra S4M пишет Ribbon out
Сообщение
Anarhist » 06 июл 2013, 14:25
Самое простое решение — зайти в настройки принтера и там произвести отключение риббона. Все просто и элегантно.
Possible Cause:
In thermal transfer mode:
1. Ribbon is not loaded
2. Ribbon is loaded incorrectly
3. The ribbon sensor is not detecting ribbon
4. Media is blocking the ribbon sensor
Solution:
1. Load ribbon correctly.
2. Calibrate the printer.
Possible Cause: In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly.
Solution:
1. Print a sensor profile. The ribbon out threshold is likely to high, above the line that indicates where the ribbon is detected.
2. Calibrate the printer or load printer defaults.
Possible Cause: If you are using direct thermal media, the printer is waiting for ribbon to be loaded because it is incorrectly set for thermal transfer mode.
Solution: Set the printer for the Direct Thermal mode.
Zebra ZT220
6
Принтер для карточек Zebra ZXP Series 3: руководство пользователя
P1058486-151
1:
Приступая к работе
Многофункциональная ЖК-панель
Предупреждающие сообщения
Данные сообщения предупреждают оператора о необходимости выполнения
определенных действий. Принтер при этом обычно продолжает работать.
Сообщения об ошибках
Сообщения об ошибках отображаются в ситуациях, когда дальнейшая работа принтера
невозможна. В зависимости от источника сообщения об ошибке перезагрузка принтера
или устранение причины показанной ошибки может вернуть принтер в рабочее
состояние. Может потребоваться также устранение неполадок и ремонт.
ПРЕДУПРЕЖДЕНИЯ (работа принтера продолжается)
CHECKING RIBBON (ПРОВЕРКА ЛЕНТЫ)
CLEAN PRINTER (ОЧИСТИТЕ ПРИНТЕР)
CLOSE LID (ЗАКРОЙТЕ КРЫШКУ КОРПУСА)
ENCODING ERROR (ОШИБКА КОДИРОВАНИЯ)
FLASH ERROR (ОШИБКА ФЛЭШ-ПАМЯТИ)
INVALID MAGNETIC DATA (НЕДЕЙСТВИТЕЛЬНЫЕ МАГНИТНЫЕ ДАННЫЕ)
READING ERROR (ОШИБКА ЧТЕНИЯ)
ОШИБКИ (ПРИНТЕР НЕ РАБОТАЕТ)
CHECK RIBBON (ПРОВЕРЬТЕ ЛЕНТУ)
COMMAND ERROR (ОШИБКА КОМАНДЫ)
COVER OPEN (ОТКРЫТА КРЫШКА)
LID OPEN (ОТКРЫТА КРЫШКА КОРПУСА)
MECHANICAL ERROR (МЕХАНИЧЕСКАЯ ОШИБКА)
OUT OF CARD (НЕТ КАРТОЧЕК)
OUT OF RIBBON (НЕТ ЛЕНТЫ)
PARAMETERS ERROR (ОШИБКА ПАРАМЕТРОВ)
We provide some easy solutions, with which you will come to know How to fix Zebra printer ribbon out error. Zebra printer ribbon out error has several reasons, like when no label stock is available into the printer, if the stock sensor does not combine the label stock, if the label length is very short, when the printer is set with continuous stock instead of gap stock and for not having the proper sensitivity settings, the stock sensor doesn’t work properly.
Follow the below mentioned steps to Fix zebra printer ribbon out error:
- No label stock: If there is no label stock in the printer, you should install label stock. The sensor indicates whether the labels are being used or not.
- Label stock is not loaded properly: You must load the label stock properly. You should check whether the label stock is covering the eye of the sensor or not.
- If you don’t use ribbon, then check if the Direct Thermal configures both the printer and driver.
- Restarting the printer can also resolve this issue. After startup, the printer will work properly and will supply a normal sensor profile.
- Sometimes you can face this problem after upgrading to the new version of firmware. So, if you don’t have any problem with the older version, then don’t upgrade your firmware.
- If the ribbon sensor cannot detect the loaded ribbon in the thermal transfer mode, then you should load the ribbon properly.
- On the other hand, sometimes the printer is unable to find the ribbon, even when the ribbon is loaded properly. What you need to do is: First of all, print a sensor profile. You will find a black area which indicates the place of detected ribbon.
- If the ribbon is broken, then at first, check whether the ribbon is loaded properly or not. After decreasing the darkness setting of the LCD display please check whether the combination of the media and ribbon is suitable or not, so that you have no need to set the burn temperature so high.
Simple Methods To Resolve Zebra Printer Ribbon Out Error
You need a driver to avoid or reduce the ribbon errors loading properly and configuration of the printer. The sensor warns the ribbon if the ribbon is recognized on the LCD display. This error may happen for some reason like:
> Not detecting a ribbon out condition.
> When ribbon wrinkle-causing random diagonal lines in print.
> When the ribbon is stalling.
> If the ribbon is breaking.
> The ribbon sensor cannot recognize the loaded ribbon in the thermal transfer mode.
> The ribbon sensor is blocked by the media in the thermal transfer mode.
The reasons vary depending on the version and model number of your printer. Thus, it is better to have a word with our Zebra Printer Customer Support and let us detect the exact reason for this error. Knowing the cause solves almost 30% of the problem. We will run a series of tools and tests and finally provide the most appropriate solution to your problem.
Fix zebra Printer 110xi4 Ribbon Out Error By Zebra customer care number – +855-534-1508
Usually, these reasons cause Zebra printer ribbon out error issue. You can apply the above-mentioned steps to solve this error easily. Still, if you are unable to sort it out, then call us at our Zebra printer customer care number – +855-534-1508, Our experts are always ready to provide you with the best solutions. You can also chat with our Zebra Live Chat Executives. We’ll respond immediately.
Zebra 105SL Error Condition Ribbon Out
Are you receiving a Zebra 105SL Error Condition Ribbon out message? This means that your Zebra 105sl printer is not detecting any ribbon loaded on the Ribbon supply spindle. If there is in fact ribbon loaded onto the ribbon supply spindle, check to ensure that it is loaded properly and pushed in fully. If the message continues to appear it is likely due to a Zebra 105sl ribbon sensor error, and will need to be repaired. Contact us below or visit our link to let our team of experts help you get your printer working properly again as efficiently as possible.
To resolve a Zebra 105sl error condition ribbon out message, you will need to reload ribbon onto the ribbon supply spindle and along the correct ribbon path. First it will travel over the snap (media guide) plate, then up and around the printhead lever, followed by down and around the ribbon take up spindle and out of the printer. Once it is ensured that the ribbon is loaded along the correct ribbon path, close the printer and continue printing. For more details on this process visit Zebra 105SL Ribbon Replacement.
Zebra 105SL Printer Parts
Zebra 105SL Ribbon Replacement
zebra 105sl error condition ribbon out
If this didn’t solve your error condition ribbon out message from your Zebra 105sl printer, visit one of our other Zebra 105sl printer repair pages:
Did this help with your Zebra 105sl error condition ribbon out problem? If not, please see below and contact us.
If you have barcoding questions or are having problems, please fill out this form to have us contact you, or call 888-317-3440 to arrange a free consultation. We also offer new and refurbished Barcode equipment.
See more on Barcode Repair and how to buy used barcode products.
