18.11.2011
Вопрос:
Ответ:
Данная ошибка свидетельствует об ошибке связи (чтения /записи) в главном процессоре. Данная ошибка не могла возникнуть сама по себе, скорее всего, предшествовали какие-то некорректные действия.
спасибо за ответ :))
могу ли я сам самостоятельно что-нибудь делать?
Ответ:
Нет, самостоятельно вы ничего не сможете сделать.
Задайте свой вопрос
Чтобы задать вопрос, Вам необходимо авторизоваться
Thanks: 0
Likes: 0
Dislikes: 0
-
10-08-2013
#1
Trusted Tech
50+ Posts
- Rep Power
- 22
I have this error P98-934 on a Riso CZ100
how do i do a memory reset or a total reset anyone who can help please
-
10-10-2013
#2
Re: error P98-934
You can try the reset, power off, hold the reset key while turning on. But this may not fix the problem, as the drum RF reader and the main board are not communicating. The RF pcb inside the drum may need replacing.
Good luck.
-
10-11-2013
#3
Trusted Tech
50+ Posts
- Rep Power
- 22
Re: error P98-934
thanks for the reply , it ended up being a faulty ink cartridge tag
Tags for this Thread
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
CHAPTER 16: PANEL MESSAGE
Error Type
P97
P97-xxx
!!System Error!!
Description
Press Reset Key
If Recovery has Failed, Call Service
To reset
Press Reset Key
display
Error Point
939
PC card access error: PC card not set.
940
PC card access error: PCMCIA card information error.
941
PC card access error: CF card device error.
942
PC card access error: Same file already exists.
943
PC card access error: Not formatted.
944
PC card access error: Media ID error.
945
PC card access error: Media error (cannot access the PC card).
946
PC card access error: Media error (not enough blank space available on CF card).
990
PC card access error: Specified file not found on the selected drive.
991
PC card access error: Accessed to the file not opened.
992
PC card access error: File information folder is already in use.
PC card access error: Incorrect setting on the readout address when sending data to the
993
machine.
994
PC card access error: Unsuccessful file deleting.
Error Type
P98 [Hardware error]
P98-xxx
!!System Error!!
Description
Press Reset Key
If Recovery has Failed, Call Service
To reset
Turn power OFF and ON.
display
Error Point
No reply from SH3M PCB. If SH3M PCB signal is detected at machine power ON, but if the
002
PCB communication terminates and P98-069 error is detected, the error point is rewrote to
002.
005
Hardware error
006
FRAM check-sum error
025
Defective RF PCB (Unsuccessful initial communication with RF PCB).
034
Unable to write on EEPROM on the machine. (Cannot access EEPROM).
035
CRC error on EEPROM on the machine (Defective EEPROM data).
038
Information between the PCB and EEPROM does not match.
039
Incorrect EEPROM.
053
Unsuccessful data readout from the Memory setting (program, mode, user paper).
054
Unsuccessful data writing of the Memory setting (program, mode, user paper).
RISO Inc. Technical Communications
[PC card access error]
Error Conditions
Error Conditions
[ 16 — 14 ]
us.riso.com