Системная ошибка е102 00000с01 8007045d

You may encounter the Xbox system error e102 during the startup or the OS update installation process. Well, MiniTool summarizes some similar cases and several available troubleshooting methods in this post.

About Xbox One System Error e102

Though system updates can be done without any issues in most time, some users still suffer from issues like Xbox system error e102 in this process. Some even receive the error at startup. The error code varies from person to person.

Some commonly received error codes and similar types of Xbox One system error e102 are listed as follows.

• Xbox One system error e106
• Xbox system error e208
• Xbox One error e207
• Xbox One system error e101
• System error e102 10030c02 8007045d
• Xbox One offline update

What Causes Xbox System Error e102

The reasons for the Xbox One X system error e102 are complicated. It may occur in different cases. For instance, some people claim that network issues cause the error, while others state that bad system updates trigger the issue. To be short, there are multiple factors that could result in the Xbox system error e102.

Here, some possible causes of the Xbox One system error e102 are summarized. You can take them as your reference while executing Xbox One system error e102 fixes.

• Bad network
• Bad system updates
• Corrupted files
• Previous system files interference

Based on the above possibilities, several solutions to Xbox system error e102 are provided.

Solution 1: Re-Sign the Xbox One

Re-signing the Xbox One account is a simple Xbox One system error e102 fix. You just need to sign out and then sign back. Through this operation, your customisations will be restored to the default factory settings and you will be allowed to properly use the console again.

Besides, it can help you identify if the Xbox One system error e102 happens because of corrupted files. If the issue still persists after signing back, try other solutions immediately.

Solution 2: Restart the Xbox Console

A restart will erase glitches with the console. Restarting the console also has been proven to be useful for fixing the Xbox system error e102. To restart the console, simply hold down the Xbox button and click on Restart this Xbox. Then check if the discussed error is resolved.

Read also: Fix Xbox Sync Button Not Working with Top 5 Fixes

Solution 3: Perform an Offline Update

If your onboard console flash has a newer OS version than what you have on the HDD/SSD or the recovery flash drive, you will receive the Xbox system error e102 as well. In this case, you need to get a flash drive with the latest OSU 1 version and then install it to your console.

This whole process is divided into 3 parts. To successfully perform an offline update, you should check the parts one by one and follow the given steps.

Part 1: Prepare a USB Drive with NTFS Format

Firstly, get a USB flash drive with 8GB free space at least. Then format it to the NTFS file system. You have multiple options to format the USB drive to NTFS. Before starting the format process, connect the USB drive to your computer.

Option 1: Use File Explorer

Step 1: Press Windows and E keys to open File Explorer.

Step 2: In the File Explorer window, click on This PC in the left panel and then move to the right side of the window to find the connected USB drive.

Step 3: Right-click on the USB device and click the Format option in the pop-up menu.

Step 4: In the Format window, choose NTFS from the drop-down menu of File System and tick the Quick Format checkbox.

Step 5: After that, click the Start button to execute the operation. If you are prompted with a warning window, click OK to confirm the operation.

Option 2: Use Disk Management

Windows built-in Disk Management utility can also format a drive to NTFS quickly. For doing that, follow these steps.

Step 1: Right-click on the Windows icon on the desktop and click Disk Management.

Step 2: Right-click on the USB drive and click Format.

Step 3: In the elevated window, choose NTFS file system and tick the Perform a quick format checkbox. After that, click OK to carry out the operation. If a warning window pops up, allow the operation by clicking OK.

Option 3: Use MiniTool Partition Wizard

Though File Explorer and Disk Management can format the USB drive to NTFS easily, they sometimes won’t work. For instance, you may encounter issues like “Disk Management Format option grey out” and “Windows was unable to complete the format” while using the two utilities.

At this time, MiniTool Partition Wizard works. As a partition management expert, it enables you to format a disk or partition within a few clicks. Actually, it is used as an SD card formatter and USB formatter.

More importantly, if the current file system of your USB drive is FAT32, MiniTool Partition Wizard allows you to convert FAT32 to NTFS without losing data. Then you can directly convert the file system instead of formatting the USB device. By doing so, you won’t lose your data.

Free Download

Format the USB Drive to NTFS

Step 1: Launch MiniTool Partition Wizard to enter its main interface.

Step 2: Click on the USB drive and click the Format Partition feature.

Step 3: In the prompted Format Partition window, set parameters including partition label, file system, and cluster size. NTFS is selected by default. Hence, if you don’t have other demands, just follow the default settings and click OK to continue.

Step 4: Tap Apply to carry out the operation.

Also read: What Does Formatting a Hard Drive Do? Here Are Answers

Convert FAT32 to NTFS

If your present USB drive’s file system is FAT32, simply convert it to NTFS with MiniTool Partition Wizard. The advantage of this operation is that it won’t cause data loss.

Step 1: After entering the main interface of MiniTool Partition Wizard, right-click on the USB drive and click Convert FAT to NTFS.

Step 2: Click Start to begin the conversion. After a while, the conversion will be completed.

Part 2: Get the OSU 1 File

After preparing a USB drive with NTFS format, it’s time to get the OSU 1 file on your USB device. For that, please refer to these steps.

Step 1: Click here to download the latest version of the Xbox One console’s OS. The download process may take you some time, so you need to wait patiently.

Step 2: After the download ends, extract the files to your USB drive.

Part 3: Insert the USB into the Xbox Console

Step 1: Turn off the Xbox One console and then connect the USB drive with the OSU 1 file included to the console.

Step 2: Hold down the Bind and Eject buttons, and then press the Xbox button.

Step 3: Release these buttons when you hear 2 power-up tones.

Step 4: Then you will see the Offline system update option in the pop-up Startup Troubleshooter screen. Choose this option by pressing X on your controller.

Step 5: Then the screen prompts you with the “Preparing console…” message. The time taken by the process depends on the read/write speed of your USB flash drive ranging from 15 minutes to 45 minutes.

Step 6: After the process finishes, your Xbox One console will restart automatically. Wait until the console is ready to boot up.

Solution 4: Reset the Console via the Xbox One Troubleshooter

Resetting the Xbox console is one of the available Xbox One system error e102 fixes. You can reset the console via the Xbox One Troubleshooter with the following steps.

Step 1: Turn off your Xbox console and then disconnect the power cords.

Step 2: Wait for 30-60 seconds.

Step 3: Hold the Bind and Eject buttons at the same time. During that, keep pressing on the Power button until you hear two power-up tones. Then you can release the Bind and Eject buttons and you will see the Xbox Startup Troubleshooter on the screen.

Step 4: Choose Reset this Xbox > Remove Everything to execute the operation.

Step 5: Wait for the finish of the process.

Are you still bothered by the Xbox system error e102? Here is a full Xbox One system error e102 fix guide. Pick one method to fix the error now! Click to Tweet

Bottom Line

If you receive Xbox One system error e102 or other similar error codes, you can use the given solutions to fix them. As all the detailed steps are provided, you don’t have to worry about the operation.

Do you have any thoughts about this error? Do you encounter any difficulties while using these solutions? You can leave your words in the following comment area. If you meet any issues with MiniTool Partition Wizard, directly contact us via [email protected].

Some Xbox One players see the dreaded ‘Xbox System Error E102‘ when starting up or installing an operating system update. Whenever this error code is produced, there’s an error with the upgrade process.

Due to faulty data interfering with a startup sequence, most of these issues are caused. There should be no issues if you use the Startup Troubleshooter to perform an Offline Reset.

For those who have a newer version of OSU1 on their onboard console flash, You can solve the problem by generating a flash drive and installing the latest OSU1 version on their console.

Although system updates are often trouble-free, some customers still encounter errors like Xbox Error Code E102 throughout the installation process. At startup, some people get the error message. For each user, the error code may be different.

Xbox System Error E102 are frequently encountered and are listed below.

• error e106 occurred on Xbox One
• Error e208 on Xbox One
• Error e207 on the Xbox One
• Error e101 in the Xbox One system console
• System error e102 10030c02 8007045d
• An offline update for Xbox One.

Causes For Xbox System Error E102

It’s critical that we first examine the underlying causes of the problem because only then can we begin to address the numerous approaches to resolving it.

When we know what’s causing the problem, we can better treat it, but we can also use our resources and time more wisely.

Consequently, the following are a few possibilities for the Xbox Error Code E102:

• Problems with the Network (Weak Network)
• Updated with a bug
• Files that have been corrupted.
• Files from previous versions interrupting the updating process

From the factors mentioned above, you can easily see that “updates” and “upgrades” of the system are the most common culprits.

If an error like this appears on your screen, something went wrong during or after an update for your Xbox system in particular.

Read Also: How to Fix PS4 Error SU-41350-3?

How to Fix Xbox System Error E102 (Different Ways)

The most recent Offline System Update File or an offline reset via Startup troubleshooter options can fix Xbox Error Code E102. Here’s a step-by-step guide to resolving Xbox One system issues like e102 and other remedies.

Check the Stability of Your Network

You’ll need a stable internet connection to check-in and get all the updates reflected. Check your internet speed at fast.com or speedtest.net to get an idea of how fast you are. After they’ve been tested and approved, look at the following changes.

Offline Factory Reset

Attempting an offline factory reset is the next step if the methods listed above fail. Also, if you couldn’t get your hands on the Troubleshooter tool, this applies to you. Follow these steps to accomplish this goal:

• Prepare your USB drive first. To restore your console to factory settings using a USB flash drive, you’ll need:
  • A computer running Windows and equipped with a USB port and internet access
  • An NTFS-formatted USB flash drive with at least 4 GB of storage space. Follow this link for step-by-step instructions on correctly formatting your hard disk.

Once the flash drive has been successfully formatted:

• Then, connect a USB drive to the computer.
• Download the reset file to your computer by clicking on the following link. You can find the files required to restore your Xbox to its factory settings in this zip file. Revert to the original settings.
• If the console update. Postcode file does not download automatically; click Save to store it on your computer.
• Right-click on the compressed file and select Extract All from the pop-up menu to unzip it.
• Add the $SystemUpdate file to your USB flash drive from the—postcode file.

Once you’ve completed step one, you’re ready to move on to step two:

• If you have a wired network connection, disconnect the cable.
• For 30 seconds, disconnect the mains cable from your console and turn it back on. Reconnect the power cord and turn the device back on.
• Connect the USB flash drive to your console’s USB port.
• You’ll need to hold down the Pair and Eject buttons on your Xbox One console while pressing the Xbox button.
• Hold down both the Eject and the Pair buttons for around fifteen seconds.
• The “power-up” tones should be about two seconds apart.
• Eject, and you may release pair buttons after the second power-up tone.
• Remove the flash drive when the console restarts.
• Digital setup instructions will appear after the console restarts, so you may easily reset your console using these instructions.

If everything goes smoothly, you’ll be redirected to the Main Screen again. If this doesn’t work, your only recourse is to have your console repaired. The service page on the Xbox website is the place to begin this procedure.

Read Also: How to Fix PS4 Error NP-34981-5

Turning Off and On Your Xbox

Restarting your Xbox Console system is one of the simplest methods to attempt initially. Of course, this primary method can repair most temporary screen issues from simple sources.

However, restarting your computer may not be enough for more significant problems. Start with this simple approach of troubleshooting and see if that helps.

Restarting your Xbox is as simple as pressing the Restart Button for a few seconds (ideally 5 to 10), then pressing it again and letting it go.

Run the Xbox Startup Troubleshooter

Follow these steps to use the Xbox One Startup troubleshooter to fix the Xbox System Error E102.

1. Switch off your Xbox One.
2. Remove the wires from the computer.
3. Wait a few seconds before continuing.
4. To make things even more complicated, hold both the binding and eject buttons simultaneously.
5. Press the power button while still holding on to the controls.
6. If the startup tone is heard twice, you’re good to go.
7. On-screen instructions for running the troubleshooter should appear at this point.
8. Eject and bind buttons must be released.
9. The troubleshooter will also ask for your assistance in diagnosing and solving the error e102.
10. All of your data on your Xbox One will be erased during this procedure.
11. You should be able to fix your Xbox One’s system error e102 by following these instructions.
12. Even if this doesn’t solve your problem, it’s still a sign that the updates have some problem while executing or parsing online.
13. When updates are available, you can download and even install them on your own time.

Using the Factory Reset (E102/ E105 / E106 / E203)

Factory testing is your only option if you’re experiencing Xbox System Error E102 and all preceding methods have failed. The complete procedure for performing a factory reset is outlined in the following paragraphs.

1. The first step is to shut down your Xbox and unplug all its cords.
2. Reconnect the wires after a few minutes.
3. Hold down the bind and eject buttons while pressing the Xbox Button simultaneously.
4. Keep the buttons pressed for around 10-15 seconds after the Xbox starts until you hear the power-up sound twice.
5. After hearing a beep, release all buttons.
6. The starting troubleshooter is now visible.
7. The “Reset this box” option is located in this Trobulershooter section.

Read also: How to Fix Error SU-30625-6 PS4

---

FAQs – Xbox System Error E102

---

Conclusion

The Xbox One System Error E102 troubleshooting guide has concluded. You should be able to eliminate this issue by utilizing the solutions listed above. All of the possible causes of the error are discussed in this article.

Follow us for more tutorials and tips. That’s very kind of you.

Получаете ли вы E102 10030c02 8007045d Ошибка Xbox при запуске игровой консоли? Чаще всего этот фатальный код появляется на дисплее после обновления системы. В результате вы не можете запустить консоль и наслаждаться любимой игрой. Обычно обновление системы проходит гладко, но если вы видите ошибку, такую ​​как E102, будьте осторожны, так как это означает проблему. К счастью, это небольшая проблема, которую нельзя решить. Для решения проблемы Xbox необходимо перезапустить консоль, переустановить обновление системы или запустить средство устранения неполадок.

Обычно E102 10030c02 8007045d Ошибка Xbox возникает во время запуска или обновления ОС. Сообщения начинаются с кодов «E», таких как E102, E105, E106, E200 и других, которые указывают на проблему в процессе обновления Xbox. Вот несколько простых решений для исправления E102 10030c02 8007045d.

Связанное – Исправление: системная ошибка Xbox E200 в Windows 10

E102 10030c02 8007045d Решения ошибок Xbox

Вот как исправить ошибку E102 10030c02 8007045d Xbox –

Выйдите из приложения и войдите

Несколько счастливчиков сообщают, что ошибка Xbox 0x87e105dc была устранена при выходе из системы и последующем входе в Xbox. Этот метод удаляет настройки и восстанавливает заводские настройки консоли по умолчанию.

Шаг 1. Перейдите к поиску на панели задач и введите Xbox и нажмите Enter .

Шаг 2. После появления приложения щелкните правой кнопкой мыши изображение профиля в левом верхнем углу и выберите Выйти . .

Шаг 3: На следующем экране нажмите Войти .

Шаг 4: Приложение определит и спрашиваю вас как – С возвращением, Let’s Play . Нажмите на нее.

Запустить средство устранения неполадок при запуске Xbox

Средство устранения неполадок при запуске Xbox решает почти все проблемы, связанные с игровой консолью. Поэтому попробуйте запустить этот инструмент, чтобы исправить ошибку Xbox E102 10030c02 8007045d.

• Сначала отключите шнур питания Xbox и убедитесь, что консоль полностью выключена.
• Теперь подождите от 30 до 60 секунд, а затем подключите шнур питания к Xbox.
• Удерживайте нажатой кнопку «BIND» с левой стороны и кнопку «EJECT» с лицевой стороны консоли вместе в течение 10-15 секунд.

Примечание. Даже если Xbox запускается, вы должны одновременно удерживать кнопки Bind и Eject в течение 10-15 секунд.

• Подождите, пока не услышите две мелодии включения питания. Как вы слышали второй вариант, отпустите кнопки.
• Нажмите кнопку Xbox , чтобы получить прямой доступ к средству устранения неполадок при запуске.
• Теперь следуйте инструкциям на экране, чтобы продолжить..

Выполнить обновление системы в автономном режиме

Перед тем, как приступить к обновлению, убедитесь, что выполняются следующие условия –

1. На вашем устройстве Windows установлено хорошее подключение к Интернету.
2. Устройство должно иметь хотя бы один порт USB.
3. Вы занимает отформатированную флешку. как NTFS с минимальным объемом памяти 4 ГБ.

Примечание . Вставьте флэш-накопитель в порт, щелкните правой кнопкой мыши USB-накопитель и выберите Формат в контекстном меню. Это откроет окно форматирования. Здесь выберите параметр NTFS в раскрывающемся меню параметра Файловая система .

Теперь, когда вы выполнили минимальные требования для этого исправления выполните действия, указанные ниже –

• Загрузите файл автономного обновления системы.
• После завершения перейдите к Загрузки и найдите файл. Щелкните его правой кнопкой мыши и выберите в контекстном меню параметр Извлечь все .
• Теперь скопируйте файл $ SystemUpdate и вставьте его на свой флеш-накопитель.
• В дальнейшем отключите USB-накопитель от системы.
• Теперь подключите его к консоли и перейдите в раздел «Запуск средства устранения неполадок при запуске Xbox» выше. .
• Когда откроется страница устранения неполадок, выберите Обновление автономной системы .

Восстановить консоль до заводских настроек по умолчанию

Если вышеуказанные методы не помогают исправить ошибку E102 10030c02 8007045d Xbox, последний вариант – восстановить консоль. Это приведет к удалению всех вещей, таких как сохраненная игра и настройки, из вашего XBox и возврат к состоянию по умолчанию. Поэтому перед продолжением необходимо сделать резервную копию важных данных. После того, как вы сохранили свои игры и настройки на внешнем устройстве, выполните следующие действия:

• Запустите страницу Устранение неполадок , как мы объясняли в первом метод.
• Используйте D-Pad , чтобы выбрать Сбросить этот Xbox , а затем нажмите A на вашем контроллере для подтверждения.
• На следующей странице выберите Удалить все .

Это все. Надеюсь, что различные исправления, упомянутые выше, разрешили E102 10030c02 8007045d

Xbox One users are in a fix while facing a system error e102 that keeps popping up. Any sort of error can be annoying on your console. However, one that completely restricts you from starting up your Xbox one is pretty serious and frustrating beyond compare. In this guide, we’ll help you fix this Xbox One system error e102. Follow the steps in the undermentioned section.

How to Fix Xbox One System Error E102?

You can fix your Xbox One e102 System Error by performing an offline reset from the Startup troubleshooter options or by separately downloading and installing the latest Offline System Update File (OSU1) on your Xbox One. Here’s how you can do these in detail and additionally find some more fixes to solve system errors like e102 on your Xbox One.

Check Your Network Stability

While it is an offline installation, in order to sign in and have all the updates reflected properly, you’ll need access to a stable network. So firstly, head to either fast.com or speedtest.net and check the same. Once done and verified, check out the fixes mentioned below.

Sign Out and Sign in to Xbox One

Try signing out and signing back in to see if the error has been solved. This could help identify if the error e102 was simply due to incorrectly processed or corrupted files. If this doesn’t work, head to the alternative fixes below.

Restart Your Xbox One

Hold down your Xbox button and click on “Restart this Xbox”. This could resolve the error e102 and fix your problem. If this too doesn’t help, consider the other aforementioned fixes.

Run the Xbox Startup Troubleshooter

To run the Xbox One Startup troubleshooter to help solve the e102 system error, follow the steps below.

• Turn your Xbox One-off.
• Disconnect the connection cords.
• Wait for about a minute.
• Furthermore, simultaneously hold the bind button and eject button.
• Without letting go of them, hit the power button.
• Continue until you hear the start-up tone 2 times.
• The troubleshooter now pops up on the screen.
• Let go of the bind and eject buttons.
• Moreover, you’ll be asked to follow a few steps to assist the troubleshooter to diagnose and solve the error e102.
• This is mainly just resetting and erasing all of your data on your Xbox One.
• Follow the steps and you should get rid of your Xbox One’s system error e102.
• This is probably the best fix to your error but however, even if this doesn’t work, it is indicative of the updates having some error while running or parsing online.
• Thankfully, Microsoft rolls out updates you can download and even install offline.

Offline System Update for Xbox One System Error E102

It is possible that your HDD or SSD has a version that doesn’t accept your console flash update if it is new. This is a common occurrence and the Xbox conveniently displays errors whenever this incompatibility arises. Here’s how you can separately download an OSU1 file onto a flash drive and use it to format your HDD or SSD.

• Get a USB with 8 GB or more clear space.
• Insert into your pc first and open up the “this pc” option.
• From here, right-click on the USB from the context menu and select “format“.
• Set its file system as “NTFS“.
• Now locate the “Quick Format” box and tick it.
• Hit start and let it format.
• Once ready, head to the official Microsoft OSU1 download site.
• Download the OSU 1 file.
• Once complete, extract the files to your configured USB.
• Check the root folder and check to see if “$SystemUpdate” is in there.
• Now ensure there’s nothing else in the USB and that there’s enough space in it for the process to work smoothly.
• This is why an 8GB USB is recommended here since the offline system update itself is around 6GB.
• Now like the previous fix, head over to your Xbox One and hold down the Bind and Eject buttons and then press the Xbox button.
• Release them once the 2 power-up tones have sounded twice.
• Once the startup troubleshooter appears, insert the USB into the console.
• Wait until you see an option called “Offline system update“.
• Now simply click on it using “X” your controller.
• The screen will now display a “Preparing console…” message.
• Patiently wait as this process could range anywhere from 15 minutes until about 45 minutes depending on the USB you’re using.
• A USB 3.0 is preferred in comparison to a USB 2.0 but both will work nonetheless.
• Once this process is complete, your Xbox one restarts automatically.
• Wait until the console is ready to boot up.
• Your Xbox One should no longer have any issues like system error e102 popping up.
• On some occasions, you might notice that your pc keeps booting up time and again.
• This is completely normal and it’s just your system ensuring everything is falling into place.
• Furthermore, if this too didn’t work, consider contacting Microsoft Support.

Fixes for Similar Errors

Mentioned below is a list of errors similar to system error e102 on Xbox One. You can use the aforementioned methods to fix these errors as well.

• System error e102 10030c02 8007045d
• Xbox Offline update
• System error e208
• Xbox One System error e106
• System error e101
• Xbox one error e207
• Startup error

We hope this guide was of assistance to you. We know that Xbox has a few errors that keep popping up all the time. Here’s a solution to the Party Error Code 0x80190193. If you wish to play along with your friends but are facing problems there as well, here’s how you can fix party not working errors on Xbox and play with your friends. Furthermore, if you wish to play the latest games but are unsure of making a committed purchase for the same, you can always consider getting Xbox live on Xbox One.