Sql ошибка 1630

Есть ли пробел после вызова метода на Substring перед первой скобкой?

Он отображается в строке 40:

 IF i > 1 AND j > 1 AND (s1_char = SUBSTRING (s2, j - 1, 1))

то есть. Убедитесь, что

select substring(CustomerName, 1, 4) AS CustName from MyTable;

вместо:

select substring (CustomerName, 1, 4) AS CustName from MyTable;

MacLochlainns Weblog

Michael McLaughlin’s Technical Blog

Placement over substance

I was stunned when a SQL query raised an ERROR 1630 (42000) telling me the SUM function didn’t exist in MySQL 5.5.23. The fix was simple. The opening parenthesis of the SUM function must be on the same line as the SUM keyword without an intervening white space. Alternatively phrased, you can’t have a line return or white space between the SUM function name and the opening parenthesis of the call parameter list. The same rule doesn’t apply to the opening parenthesis of the FORMAT function and it seems to me that this parsing inconsistency is problematic.

Therefore, my surprise, observation, and complaint is that all functions don’t parse the same way, using the same rules. That is, unless you use specialized SQL_MODE settings. This assumption was borne out by Kolbe Kegel’s comment on this post, and there are 30 remaining built in functions that have specialized parsing and resolution markers.

A simplified version of the code that raises the error follows. As you’ll notice the opening parenthesis for the FORMAT and SUM function have intervening white space and a line return.

SELECT t.transaction_account AS «Transaction» , LPAD(FORMAT (SUM (CASE WHEN EXTRACT(MONTH FROM transaction_date) = 1 AND EXTRACT(YEAR FROM transaction_date) = 2011 THEN CASE WHEN t.transaction_type = cl.common_lookup_type THEN t.transaction_amount ELSE t.transaction_amount * -1 END END),2),10,’ ‘) AS «JAN» FROM TRANSACTION t CROSS JOIN common_lookup cl WHERE cl.common_lookup_table = ‘TRANSACTION’ AND cl.common_lookup_column = ‘TRANSACTION_TYPE’ AND cl.common_lookup_type = ‘DEBIT’ GROUP BY t.transaction_account;

Based on the comments, the SQL_MODE is:

It raises the following error:

ERROR 1630 (42000): FUNCTION studentdb.SUM does not exist. Check the ‘Function Name Parsing and Resolution’ section in the Reference Manual

Moving ONLY the opening parenthesis to the end of the SUM keyword (or removing the line return and white space from between the SUM keyword and opening parenthesis) prevents the error but it would be more convenient if it supported both approaches. It seems odd that an intervening line return and white space for the SUM function raises an exception while the same intervening line return and white space doesn’t raise an exception for the FORMAT function. It strikes me the parser should support both or reject both. Here’s the fixed code that works without enabling the IGNORE_SPACE SQL Mode option.

SELECT t.transaction_account AS «Transaction» , LPAD(FORMAT (SUM( CASE WHEN EXTRACT(MONTH FROM transaction_date) = 1 AND EXTRACT(YEAR FROM transaction_date) = 2011 THEN CASE WHEN t.transaction_type = cl.common_lookup_type THEN t.transaction_amount ELSE t.transaction_amount * -1 END END),2),10,’ ‘) AS «JAN» FROM TRANSACTION t CROSS JOIN common_lookup cl WHERE cl.common_lookup_table = ‘TRANSACTION’ AND cl.common_lookup_column = ‘TRANSACTION_TYPE’ AND cl.common_lookup_type = ‘DEBIT’ GROUP BY t.transaction_account;

As noted by the comments, adding the IGNORE_SPACE to the SQL_MODE lets both queries work without moving the open parenthesis. You can do that in a session with the following syntax (which is covered in an older post):

SET SQL_MODE=(SELECT CONCAT(@@sql_mode,’,IGNORE_SPACE’));

Источник

MacLochlainns Weblog

Michael McLaughlin’s Technical Blog

Archive for the ‘SQL_MODE’ tag

Placement over substance

I was stunned when a SQL query raised an ERROR 1630 (42000) telling me the SUM function didn’t exist in MySQL 5.5.23. The fix was simple. The opening parenthesis of the SUM function must be on the same line as the SUM keyword without an intervening white space. Alternatively phrased, you can’t have a line return or white space between the SUM function name and the opening parenthesis of the call parameter list. The same rule doesn’t apply to the opening parenthesis of the FORMAT function and it seems to me that this parsing inconsistency is problematic.

Therefore, my surprise, observation, and complaint is that all functions don’t parse the same way, using the same rules. That is, unless you use specialized SQL_MODE settings. This assumption was borne out by Kolbe Kegel’s comment on this post, and there are 30 remaining built in functions that have specialized parsing and resolution markers.

A simplified version of the code that raises the error follows. As you’ll notice the opening parenthesis for the FORMAT and SUM function have intervening white space and a line return.

SELECT t.transaction_account AS «Transaction» , LPAD(FORMAT (SUM (CASE WHEN EXTRACT(MONTH FROM transaction_date) = 1 AND EXTRACT(YEAR FROM transaction_date) = 2011 THEN CASE WHEN t.transaction_type = cl.common_lookup_type THEN t.transaction_amount ELSE t.transaction_amount * -1 END END),2),10,’ ‘) AS «JAN» FROM TRANSACTION t CROSS JOIN common_lookup cl WHERE cl.common_lookup_table = ‘TRANSACTION’ AND cl.common_lookup_column = ‘TRANSACTION_TYPE’ AND cl.common_lookup_type = ‘DEBIT’ GROUP BY t.transaction_account;

Based on the comments, the SQL_MODE is:

It raises the following error:

ERROR 1630 (42000): FUNCTION studentdb.SUM does not exist. Check the ‘Function Name Parsing and Resolution’ section in the Reference Manual

Moving ONLY the opening parenthesis to the end of the SUM keyword (or removing the line return and white space from between the SUM keyword and opening parenthesis) prevents the error but it would be more convenient if it supported both approaches. It seems odd that an intervening line return and white space for the SUM function raises an exception while the same intervening line return and white space doesn’t raise an exception for the FORMAT function. It strikes me the parser should support both or reject both. Here’s the fixed code that works without enabling the IGNORE_SPACE SQL Mode option.

SELECT t.transaction_account AS «Transaction» , LPAD(FORMAT (SUM( CASE WHEN EXTRACT(MONTH FROM transaction_date) = 1 AND EXTRACT(YEAR FROM transaction_date) = 2011 THEN CASE WHEN t.transaction_type = cl.common_lookup_type THEN t.transaction_amount ELSE t.transaction_amount * -1 END END),2),10,’ ‘) AS «JAN» FROM TRANSACTION t CROSS JOIN common_lookup cl WHERE cl.common_lookup_table = ‘TRANSACTION’ AND cl.common_lookup_column = ‘TRANSACTION_TYPE’ AND cl.common_lookup_type = ‘DEBIT’ GROUP BY t.transaction_account;

As noted by the comments, adding the IGNORE_SPACE to the SQL_MODE lets both queries work without moving the open parenthesis. You can do that in a session with the following syntax (which is covered in an older post):

SET SQL_MODE=(SELECT CONCAT(@@sql_mode,’,IGNORE_SPACE’));

Источник

MySQL Server Error Codes and Messages 1600 — 1649

Message: Creation context of view `%s`.`%s’ is invalid

Message: Creation context of stored routine `%s`.`%s` is invalid

Message: Corrupted TRG file for table `%s`.`%s`

Message: Triggers for table `%s`.`%s` have no creation context

Message: Trigger creation context of table `%s`.`%s` is invalid

Message: Creation context of event `%s`.`%s` is invalid

Message: Cannot open table for trigger `%s`.`%s`

Message: Cannot create stored routine `%s`. Check warnings

Error: 1608 SQLSTATE: HY000 (ER_NEVER_USED)

Message: Ambiguous slave modes combination. %s

Message: The BINLOG statement of type `%s` was not preceded by a format description BINLOG statement.

Message: Corrupted replication event was detected

Message: Invalid column reference (%s) in LOAD DATA

Message: Being purged log %s was not found

Error: 1613 SQLSTATE: XA106 (ER_XA_RBTIMEOUT)

Message: XA_RBTIMEOUT: Transaction branch was rolled back: took too long

Error: 1614 SQLSTATE: XA102 (ER_XA_RBDEADLOCK)

Message: XA_RBDEADLOCK: Transaction branch was rolled back: deadlock was detected

Error: 1615 SQLSTATE: HY000 (ER_NEED_REPREPARE)

Message: Prepared statement needs to be re-prepared

Message: DELAYED option not supported for table ‘%s’

Message: The master info structure does not exist

Message: option ignored

Message: Built-in plugins cannot be deleted

Error: 1620 SQLSTATE: HY000 (WARN_PLUGIN_BUSY)

Message: Plugin is busy and will be uninstalled on shutdown

Message: %s variable ‘%s’ is read-only. Use SET %s to assign the value

Message: Storage engine %s does not support rollback for this statement. Transaction rolled back and must be restarted

Message: Unexpected master’s heartbeat data: %s

Message: The requested value for the heartbeat period is either negative or exceeds the maximum allowed (%s seconds).

Message: Bad schema for mysql.ndb_replication table. Message: %s

Message: Error in parsing conflict function. Message: %s

Message: Write to exceptions table failed. Message: %s»

Message: Comment for table ‘%s’ is too long (max = %lu)

Message: Comment for field ‘%s’ is too long (max = %lu)

Message: FUNCTION %s does not exist. Check the ‘Function Name Parsing and Resolution’ section in the Reference Manual

Error: 1631 SQLSTATE: HY000 (ER_DATABASE_NAME)

Error: 1632 SQLSTATE: HY000 (ER_TABLE_NAME)

Error: 1633 SQLSTATE: HY000 (ER_PARTITION_NAME)

Error: 1635 SQLSTATE: HY000 (ER_TEMPORARY_NAME)

Error: 1636 SQLSTATE: HY000 (ER_RENAMED_NAME)

Message: Too many active concurrent transactions

Message: Non-ASCII separator arguments are not fully supported

Message: debug sync point wait timed out

Message: debug sync point hit limit reached

Error: 1641 SQLSTATE: 42000 (ER_DUP_SIGNAL_SET)

Message: Duplicate condition information item ‘%s’

Error: 1642 SQLSTATE: 01000 (ER_SIGNAL_WARN)

Message: Unhandled user-defined warning condition

Message: Unhandled user-defined not found condition

Message: Unhandled user-defined exception condition

Message: RESIGNAL when handler not active

Message: SIGNAL/RESIGNAL can only use a CONDITION defined with SQLSTATE

Message: Data truncated for condition item ‘%s’

Message: Data too long for condition item ‘%s’

Error: 1649 SQLSTATE: HY000 (ER_UNKNOWN_LOCALE)

Источник

MacLochlainns Weblog

Michael McLaughlin’s Technical Blog

Archive for the ‘SUM function’ tag

Placement over substance

I was stunned when a SQL query raised an ERROR 1630 (42000) telling me the SUM function didn’t exist in MySQL 5.5.23. The fix was simple. The opening parenthesis of the SUM function must be on the same line as the SUM keyword without an intervening white space. Alternatively phrased, you can’t have a line return or white space between the SUM function name and the opening parenthesis of the call parameter list. The same rule doesn’t apply to the opening parenthesis of the FORMAT function and it seems to me that this parsing inconsistency is problematic.

Therefore, my surprise, observation, and complaint is that all functions don’t parse the same way, using the same rules. That is, unless you use specialized SQL_MODE settings. This assumption was borne out by Kolbe Kegel’s comment on this post, and there are 30 remaining built in functions that have specialized parsing and resolution markers.

A simplified version of the code that raises the error follows. As you’ll notice the opening parenthesis for the FORMAT and SUM function have intervening white space and a line return.

SELECT t.transaction_account AS «Transaction» , LPAD(FORMAT (SUM (CASE WHEN EXTRACT(MONTH FROM transaction_date) = 1 AND EXTRACT(YEAR FROM transaction_date) = 2011 THEN CASE WHEN t.transaction_type = cl.common_lookup_type THEN t.transaction_amount ELSE t.transaction_amount * -1 END END),2),10,’ ‘) AS «JAN» FROM TRANSACTION t CROSS JOIN common_lookup cl WHERE cl.common_lookup_table = ‘TRANSACTION’ AND cl.common_lookup_column = ‘TRANSACTION_TYPE’ AND cl.common_lookup_type = ‘DEBIT’ GROUP BY t.transaction_account;

Based on the comments, the SQL_MODE is:

It raises the following error:

ERROR 1630 (42000): FUNCTION studentdb.SUM does not exist. Check the ‘Function Name Parsing and Resolution’ section in the Reference Manual

Moving ONLY the opening parenthesis to the end of the SUM keyword (or removing the line return and white space from between the SUM keyword and opening parenthesis) prevents the error but it would be more convenient if it supported both approaches. It seems odd that an intervening line return and white space for the SUM function raises an exception while the same intervening line return and white space doesn’t raise an exception for the FORMAT function. It strikes me the parser should support both or reject both. Here’s the fixed code that works without enabling the IGNORE_SPACE SQL Mode option.

SELECT t.transaction_account AS «Transaction» , LPAD(FORMAT (SUM( CASE WHEN EXTRACT(MONTH FROM transaction_date) = 1 AND EXTRACT(YEAR FROM transaction_date) = 2011 THEN CASE WHEN t.transaction_type = cl.common_lookup_type THEN t.transaction_amount ELSE t.transaction_amount * -1 END END),2),10,’ ‘) AS «JAN» FROM TRANSACTION t CROSS JOIN common_lookup cl WHERE cl.common_lookup_table = ‘TRANSACTION’ AND cl.common_lookup_column = ‘TRANSACTION_TYPE’ AND cl.common_lookup_type = ‘DEBIT’ GROUP BY t.transaction_account;

As noted by the comments, adding the IGNORE_SPACE to the SQL_MODE lets both queries work without moving the open parenthesis. You can do that in a session with the following syntax (which is covered in an older post):

SET SQL_MODE=(SELECT CONCAT(@@sql_mode,’,IGNORE_SPACE’));

Источник

Русские Блоги

[MySQL] При вызове хранимой процедуры отображается ОШИБКА 1305 (42000): PROCEDURE test.sp1 не существует

Описание проблемы:

1. Создайте простую хранимую процедуру запроса в MySQL:

2. Затем используйте CALL для вызова этой хранимой процедуры, и ошибка ОШИБКА 1305 (42000): PROCEDURE test.sp1 не существует:

Исправление проблем:

1. Сначала подумайте, действительно ли эта хранимая процедура отсутствует, проверьте текущую хранимую процедуру и убедитесь, что хранимая процедура существует:

2. В это время я думал, что у пользователя нет разрешения на вызов текущей хранимой процедуры, и разрешение хранимой процедуры было предоставлено текущему пользователю. В это время произошла другая ошибка:

Это обнаруживается путем запроса данных, которые необходимо обновить текущую хранимую процедуру перед выполнением оператора авторизации:

Выполните вызов этой хранимой процедуры еще раз, и отобразится успешный вызов:

Интеллектуальная рекомендация

Реализация оценки приложения iOS

Есть два способа получить оценку приложения: перейти в App Store для оценки и оценка в приложении. 1. Перейдите в App Store, чтобы оценить ps: appid можно запросить в iTunes Connect 2. Встроенная оцен.

JS функциональное программирование (е)

Давайте рассмотрим простой пример, чтобы проиллюстрировать, как используется Reduce. Первый параметр Reduce — это то, что мы принимаем массив arrayOfNums, а второй параметр — функцию. Эта функция прин.

PWN_JarvisOJ_Level1

Nc первый Затем мы смотрим на декомпиляцию ida Перед «Hello, World! N» есть уязвимая_функция, проверьте эту функцию после ввода Видно, что только что появившийся странный адрес является пе.

Установка и развертывание Kubernetes

На самом деле, я опубликовал статью в этом разделе давным -давно, но она не достаточно подробно, и уровень не является ясным. Когда я развернулся сегодня, я увидел его достаточно (хотя это было успешн.

На стороне многопроцессорного сервера — (2) *

Обработка сигнала Родительский процесс часто очень занят, поэтому вы не можете просто вызвать функцию waitpid, чтобы дождаться завершения дочернего процесса. Затем обсудите решение. Обратитесь .

Источник

# 6 лет, 11 месяцев назад (отредактировано 6 лет, 11 месяцев назад)

Темы: 23 Сообщения: 175 Участник с: 16 ноября 2013

Доброго дня! Вопрос следующего характера: MariaDB [metro]> select sum (holiday) from tabel_plane; ERROR 1630 (42000): FUNCTION metro.sum does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual MariaDB [metro]> select sum (holiday) from metro.tabel_plane; ERROR 1630 (42000): FUNCTION metro.sum does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual MariaDB [metro]> Собственно, агрегатная фнкция sum () должна быть глобальной, насколько я понимаю… Или я чего-то не понимаю? Как её вызвать? Или как создать свою агрегатную функцию?

lampslave	# 6 лет, 11 месяцев назад
Темы: 32 Сообщения: 4800 Участник с: 05 июля 2011	Функции чувствительны к регистру.

Anton8830	# 6 лет, 11 месяцев назад
Темы: 23 Сообщения: 175 Участник с: 16 ноября 2013	lampslave Функции чувствительны к регистру. MariaDB [(none)]> select sum(holiday) from metro.tabel_plane; +--------------+ | sum(holiday) | +--------------+ | 160000 | +--------------+ 1 row in set (0.02 sec) MariaDB [(none)]>

Anton8830

# 6 лет, 11 месяцев назад

Темы: 23 Сообщения: 175 Участник с: 16 ноября 2013

К пробелам они тоже чувствительны… MariaDB [metro]> select sum(holiday) from tabel_plane; +--------------+ | sum(holiday) | +--------------+ | 160000 | +--------------+ 1 row in set (0.02 sec) MariaDB [metro]> select sum (holiday) from tabel_plane; ERROR 1630 (42000): FUNCTION metro.sum does not exist. Check the 'Function Name Parsing and Resolution' section in the Reference Manual MariaDB [metro]>

lampslave	# 6 лет, 11 месяцев назад
Темы: 32 Сообщения: 4800 Участник с: 05 июля 2011	Хм, получается, про регистр я наврал Но общий смысл сохранятеся, надо как в доке писать, тогда проблем не будет.