Updated: 2 months ago
Article ID: 11234
Common Problems
- Getting error message «Transfer Aborted: Instance not found» when using portals.
- Unable to enter Battlegrounds or Dungeons.
- My character was dropped from a flight path.
-
This error is often temporary and will clear itself up within a few minutes. If waiting does not fix the issue, try the following troubleshooting steps:
- This message can result from corrupted user interface or AddOn files. To resolve:
- Temporarily disable AddOns from the in-game menu and restart the game
- If the issue persists, reset the World of Warcraft user interface
- Connectivity issues can prevent access to game instances. Try the steps on this page to resolve these issues.
-
If the above troubleshooting fails to resolve the issue, please contact us for assistance.
Please log in to submit feedback.
Question
Issue: How to fix Transfer aborted: instance not found error?
Hello, I’m writing with the hopes that you can help me. In World of Warcraft, every time I enter a different zone or instance, I get the Transfer aborted: instance not found error. I then get teleported back into the previous zone. This is happening for awhile now and is particularly annoying. In-game tickets did not solve anything. Any help with this?
Solved Answer
Transfer aborted: instance not found is a World of Warcraft-specific error that can be encountered during the game. Users complained about the issue on various tech forums, and, despite the efforts, the problem remains. While some players reported the issue to be prevalent only after the release of Shadowlands expansion, it has been around for many years, seeing how World of Warcraft is almost two decades old by now.
Transfer aborted: instance not found occurs when players try to access a different zone, enter an instance, use hearthstone or take a flight path. In most cases, they are teleported back to where they came from, while others said that their game crashed entirely. After that, they could not access the game at all, at which point the error fix becomes rather critical.
Due to a high number of complaints, Blizzard, the game developer, claimed that the issue is temporary and will be resolved. As soon as it was announced that it should not longer bug players, it was far from what they experienced for real. Therefore, many users tried to find new ways to fix Transfer aborted: instance not found WoW error.
The reason for the Transfer aborted: instance not found error is not entirely clear. As mentioned above, Blizzard applied fixes internally that prevent players from enjoying the game. However, many users to this day experience this rather frustrating issue during their gameplay.
World of Warcraft is one of the most iconic MMO RPGs. First released in 2004, it accumulated a large number of followers over the years[1] and, despite player count declining occasionally, many come back as soon as the new expansion is released. Despite its success, it does not avoid technical difficulties.
Previously we described the World of Warcraft was unable to start up 3D acceleration error, and many users said that the article helped them to resolve the issue. Now, we aim to help players to fix Transfer aborted: instance not found error once and for all. Note that, if you experience a lot of overall errors, whether in-game or not, we recommend you try fixing underlying PC issues with RestoroMac Washing Machine X9 repair tools.
Fix 1. Renew your IP address and flush DNS
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
Since the error could be caused by connectivity issues, we recommend using Command Prompt to resolve them:
- Type in cmd in Windows search
- Right-click on Command Prompt search result and select Run as administrator
- In the new window, type in the following commands, pressing Enter after each:
ipconfig /release
ipconfig /renew
ipconfig /flushdns
Fix 2. Disable startup items
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
Software conflicts might be causing issues with WoW. Thus, make sure none of them are launched at the PC boot:
- Press Ctrl + Shift + Esc to open Task Manager
- Go to Startup tab
- Right-click on each of the programs and select Disable (especially any game-related items, such as add-on managers)
- Reboot your device.
Fix 3. Update your GPU drivers
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
Video drivers are among the most important components when it comes to gaming. While you can use the Device Manager to update drivers,[2] GPU drivers are quite specific to your graphics card model and should be installed from the manufacturer’s websites.
Here are links to the major GPU producers – all you have to do is enter the model of your card into the search field, and download the newest drivers:
- Nvidia
- AMD
- Intel
If you don’t know the model of your GPU or you don’t want to bother with the tedious process of constant driver updating, we recommend using DriverFix. It can automatically backup, detect, download, and install new drivers whenever they are released.
Fix 4. Reset your router
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
Resetting router is another way of fixing connectivity issues:
- Turn off your PC and all the other devices connected to the router
- Go to your router and unplug it by pulling out the connection cord
- Wait for a minute and plug it back in
- Wait till router boots up fully and check if the problem persists.
Fix 5. Reset your UI
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
The above should have solved all the technical issues that could cause the Transfer aborted: instance not found error. Now let’s move on to the in-game solutions. First and foremost, add-ons and other UI-related glitches might be causing the issue. Therefore, you should reset your UI[3] as follows:
- Open Battle.net (ensure WoW is not running)
- Click on Options and select Show in Explorer
- Go to either _retail_ or _classic_ folder for the appropriate game version
- Rename Cache, Interface and WTF folders as follows:
CacheOld
InterfaceOld
WTFOld - Login to game and see if that helped you fix WoW error.
Fix 6. Repair the game via Battle.net launcher
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
- Open Battle.net
- Click Options and select Scan and Repair
- When the warning shows up, click Begin Scan
- Wait till the process is finished.
Fix 7. Disable Network optimization option
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
According to some users, disabling the Network optimization option helped to solve the issue. Keep in mind that this option might turn on by default after each patch, so you need to re-do it each time if this solution works for you:
- Log in to your account
- Once in game, press Esc to open the Game Menu
- Select System
- Go to Network on the left
- Untick the Optimize Network for Speed option
- Click Apply and Okay.
Note: also, disable Enable IPv6 when available if that option is ticked for you.
Fix 8. Wait
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Restoro Mac Washing Machine X9.
In some cases, Transfer aborted: instance not found error can be caused due to Blizzard’s servers instability. Hardware required to keep up the game that is constantly played by millions of people is extremely powerful, but even a high-profile company can run into technical difficulties sometimes.
Therefore, if you are experiencing these issues out of the blue, you should check official Blizzard forums, Twitter, or other social media outlets to see if any announcements by the company were made.
Repair your Errors automatically
ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:
do it now!
Download Fix
Happiness
Guarantee
do it now!
Download Fix
Happiness
Guarantee
Compatible with Microsoft Windows
Compatible with OS X
Still having problems?
If you failed to fix your error using RestoroMac Washing Machine X9, reach our support team for help. Please, let us know all details that you think we should know about your problem.
Restoro — a patented specialized Windows repair program. It will diagnose your damaged PC. It will scan all System Files, DLLs and Registry Keys that have been damaged by security threats.Mac Washing Machine X9 — a patented specialized Mac OS X repair program. It will diagnose your damaged computer. It will scan all System Files and Registry Keys that have been damaged by security threats.
This patented repair process uses a database of 25 million components that can replace any damaged or missing file on user’s computer.
To repair damaged system, you have to purchase the licensed version of Restoro malware removal tool.To repair damaged system, you have to purchase the licensed version of Mac Washing Machine X9 malware removal tool.
Private Internet Access is a VPN that can prevent your Internet Service Provider, the government, and third-parties from tracking your online and allow you to stay completely anonymous. The software provides dedicated servers for torrenting and streaming, ensuring optimal performance and not slowing you down. You can also bypass geo-restrictions and view such services as Netflix, BBC, Disney+, and other popular streaming services without limitations, regardless of where you are.
Malware attacks, particularly ransomware, are by far the biggest danger to your pictures, videos, work, or school files. Since cybercriminals use a robust encryption algorithm to lock data, it can no longer be used until a ransom in bitcoin is paid. Instead of paying hackers, you should first try to use alternative recovery methods that could help you to retrieve at least some portion of the lost data. Otherwise, you could also lose your money, along with the files. One of the best tools that could restore at least some of the encrypted files – Data Recovery Pro.
Есть ВДСка 2гига оперативы, 2ггц проц, 80гиг диск.
На нём крутятся 10-15 высокопосещаемых сайтов (двиг ДЛЕ) — в сумме трафа 120К (250К просмотров) / сутки, не считая ботов и сапы.
Днем, в пиковые нагрузки (и ночью тоже) при работе на FTP (скачать/закачать/отредактировать файл) постоянно вылазит ошибка 451 Transfer aborted. Insufficient memory or file locked. (работаю через Total Commander, но не в нем дело).
Также, на сайтах PHP скрипты время от времени обрабатывают картинки (которые лежат на сервере) — кропят и перезаписывают (для кеширования графики — к примеру, картинки топ-новостей и пара информационных блоков).
При нагрузке сервера (днем в основном) PHP скрипты не могут достучаться до файлов: Function: GetElement_Image Line:927 => Cannot perform getimagesize for file: _http://***.com/***/1262646913_e6fd3d7f-7863-4750-bb7a-c0251a1d6fc9.jpg — хотя, этот файл (и подобные ему) есть на сервере и прекрасно читаются по http-протоколу (PHP-код обработчика выверен до мелочей и оттестирован на многих сайтах). Доступ к файлам (группа/владелец) расписан корректно.
В общем, складывается впечатление, что есть проблемы с файловой системой (возможно, с сокетами).
Люди добрые, посоветуйте, что делать — а то уже возникло желание на дедик переехать (но сильно неохота это хозяйство переносить). Нужно решить проблему. Куда копать?
At Bobcares, we provide 24/7 expert support, monitoring and preventive maintenance to all our customers.
And as part of our service, we sometimes have to fix numerous issues coming from various client, all in a day.
‘552 Transfer aborted, Disk quota exceeded‘ is one such issue that we often resolve for our clients.
What does “552 Transfer aborted, Disk quota exceeded” mean?
What if while uploading your file, you see that you’ve already used up all your allocated space?
Or, what if you have space available, but the file is so large that if uploaded, it would exceed your disk space quota?
In such cases, FTP server sends you the ‘552 Transfer aborted, Disk quota exceeded‘ message. This means that you have either reached or exceeded your disk space quota.
What causes “552 Transfer aborted, Disk quota exceeded” error?
When customers contact us with this issue, we look for the various reasons that could be using up all the disk space.
And in our experience, the 5 most common causes for space hogs have been :
1. Backups
Many a times, customers have to restore backup archives to get a file. And we have seen that there’s usually a tendency to forget about removing the full archive.
There have been instances where we’ve deleted uncompressed archives which had been occupying over 70% of the space.
And then, we’ve come across situations where VPS owners store backup on the same disk. In such cases, these backup archives and uncompressed files take up a huge amount of disk space.
So, we delete these files to resolve the issue. And as a preventive measure, we set up disk space alerts and fix space issues before they lead to service failure.
2. Old application backups and database dumps
We have seen that web users sometimes store old copies of web apps in their document root.
Also, website developers usually take a backup before they upgrade an app. And we’ve seen that in some accounts, there maybe several months worth of database dumps that take as much as 50% of the disk space.
In such situations we clear these backups to reclaim the space.
3. Unused media files
When we check for probable causes for the space limitation, we sometimes run into a lot of unused media files stored by the site.
These are usually several versions of the same video, audio or image file. Media files as such take a lot of space. These are files which are never accessed for months or even years.
Deleting them frees up the space for other uses.
4. Spams
Sometimes a user may be flooded with hundreds of unsolicited email or spams a day.
A single spam may not take up a large space. But, once they start accumulating, their combined consumption may reach hundreds of MBs or GBs of space.
We have seen that this is usually the case for customers who opt to use the Spam quarantine feature but sometimes forget about the spams. In such situations, we recommend automatic deletion of spam mails.
We also set up mail directory expiry settings. With this option, clients can review the spam mails if they want. And any spam that’s older than 30 days gets deleted automatically.
5. Trash
Most often deleted files end up in ‘Trash’ folders. In such cases, the deleted file’s disk space is still in use.
So, when we check and find that the ‘Trash’ folder contents are the major space users, we purge the ‘Trash’ folder to free up the disk space.
Conclusion
‘552 Transfer aborted, Disk quota exceeded‘ is a common warning message for the disk quota limitation. Today we have seen the 5 common causes for this problem and how our Support Engineers fix it at Bobcares.
PREVENT YOUR SERVER FROM CRASHING!
Never again lose customers to poor server speed! Let us help you.
Our server experts will monitor & maintain your server 24/7 so that it remains lightning fast and secure.
SEE SERVER ADMIN PLANS
var google_conversion_label = «owonCMyG5nEQ0aD71QM»;
Moderator: Project members
-
redhonker
- 500 Command not understood
- Posts: 4
- Joined: 2014-09-16 04:22
426 Connection closed; transfer aborted.
#1
Post
by redhonker » 2014-09-16 04:30
Hi,
I am using FileZilla Server. It was working fine about a month ago. Now I am seeing this error frequently (once every a few seconds to once every few minutes).
— The server is behind a firewall and uses passive mode.
— These are large data files.
— The connection is 100 Mbps and the transfer rate ranges from 100KB to 5 MB. Higher speed appears to suffer from more frequent disconnect.
Below is the log. Any hint on how to troubleshoot?
Thanks
> 227 Entering Passive Mode (64,119,##,##,10,148)
> REST 11159189
> 350 Rest supported. Restarting at 11159189
> RETR 130801_182708.mts
> 150 Connection accepted, restarting at offset 11159189
> SSL connection for data connection established
> 226 Transfer OK, compression saved 378938 of 38705515 bytes (0.98%)
> PASV
> 227 Entering Passive Mode (64,119,##,##,10,147)
> RETR 130801_183135.mts
> 150 Connection accepted
> SSL connection for data connection established
> 426 Connection closed; transfer aborted.
> QUIT
> 221 Goodbye
> disconnected
-
botg
- Site Admin
- Posts: 34944
- Joined: 2004-02-23 20:49
- First name: Tim
- Last name: Kosse
-
Contact:
Re: 426 Connection closed; transfer aborted.
#2
Post
by botg » 2014-09-16 08:16
Please update to the most recent version of FileZilla Server, old versions are not supported.
-
redhonker
- 500 Command not understood
- Posts: 4
- Joined: 2014-09-16 04:22
Re: 426 Connection closed; transfer aborted.
#3
Post
by redhonker » 2014-09-17 03:17
Just upgraded to 0.9.46 and tested again. Same problem. Any way to troubleshoot?
Thanks
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> Connected on port 2709, sending welcome message…
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> 220 Hello
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> AUTH TLS
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> 234 Using authentication type TLS
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> SSL connection established
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> PBSZ 0
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> 200 PBSZ=0
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> USER hh
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> 331 Password required for hh
(000003)9/16/2014 23:10:31 — (not logged in) (156.111.*.*)> PASS ********
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 230 Logged on
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> SYST
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 215 UNIX emulated by FileZilla
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> FEAT
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 211-Features:
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MDTM
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> REST STREAM
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> SIZE
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MODE Z
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MLST type*;size*;modify*;
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MLSD
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> AUTH SSL
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> AUTH TLS
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> PROT
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> PBSZ
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> UTF8
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> CLNT
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MFMT
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 211 End
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> OPTS UTF8 ON
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 202 UTF8 mode is always enabled. No need to send this command.
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> PWD
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 257 «/» is current directory.
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> TYPE I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 200 Type set to I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> CWD /2014/
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 250 CWD successful. «2014» is current directory.
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> PWD
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 257 «2014» is current directory.
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> TYPE I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 200 Type set to I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> REST 1
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 350 Rest supported. Restarting at 1
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> REST 0
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 350 Rest supported. Restarting at 0
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MDTM 130806_085614.file
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 213 20130806125614
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> TYPE I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 200 Type set to I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> TYPE I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 200 Type set to I
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> SIZE 130806_085614.file
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 213 30400512
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> MODE Z
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 200 MODE set to Z.
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> PROT P
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 200 Protection level set to P
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> PASV
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,148)
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> REST 14120770
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 350 Rest supported. Restarting at 14120770
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> RETR 130806_085614.file
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> 150 Opening data channel for file download from server of «/2014/130806_085614.file», restarting at offset 14120770
(000003)9/16/2014 23:10:31 — hh (156.111.*.*)> SSL connection for data connection established
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> 226 Successfully transferred «/2014/130806_085614.file», unfortunately compression did increase the transfer size by 2491 bytes to 16282233 bytes (0.01%)
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> TYPE I
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> 200 Type set to I
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> PASV
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,147)
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> RETR 130818_113431.file
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> 150 Opening data channel for file download from server of «/2014/130818_113431.file»
(000003)9/16/2014 23:10:35 — hh (156.111.*.*)> SSL connection for data connection established
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> 226 Successfully transferred «/2014/130818_113431.file», unfortunately compression did increase the transfer size by 1316 bytes to 8553764 bytes (0.01%)
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> TYPE I
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> 200 Type set to I
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> PASV
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,148)
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> RETR 130822_182111.file
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> 150 Opening data channel for file download from server of «/2014/130822_182111.file»
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> SSL connection for data connection established
(000003)9/16/2014 23:11:07 — hh (156.111.*.*)> NOOP
(000003)9/16/2014 23:11:07 — hh (156.111.*.*)> 200 OK
(000003)9/16/2014 23:11:09 — hh (156.111.*.*)> 426 Connection closed; aborted transfer of «/2014/130822_182111.file»
(000003)9/16/2014 23:11:09 — hh (156.111.*.*)> QUIT
(000003)9/16/2014 23:11:09 — hh (156.111.*.*)> 221 Goodbye
(000003)9/16/2014 23:11:09 — hh (156.111.*.*)> disconnected.
-
botg
- Site Admin
- Posts: 34944
- Joined: 2004-02-23 20:49
- First name: Tim
- Last name: Kosse
- Contact:
Re: 426 Connection closed; transfer aborted.
#4
Post
by botg » 2014-09-17 08:10
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> RETR 130822_182111.file
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> 150 Opening data channel for file download from server of «/2014/130822_182111.file»
(000003)9/16/2014 23:10:37 — hh (156.111.*.*)> SSL connection for data connection established
(000003)9/16/2014 23:11:07 — hh (156.111.*.*)> NOOP
(000003)9/16/2014 23:11:07 — hh (156.111.*.*)> 200 OK
(000003)9/16/2014 23:11:09 — hh (156.111.*.*)> 426 Connection closed; aborted transfer of «/2014/130822_182111.file»
Your client is in violation to the FTP specifications. In FTP, at most one command may be outstanding. A client MUST NOT send a command unless it has received a non-preliminary reply to the previous command.
Preliminary replies start with 1, non-preliminary replies start with 2 through 5.
In this case there has only been a preliminary reply to the RETR command, but no non-preliminary reply. Yet your client already sends the next command (NOOP) a few seconds later.
Your client needs to be fixed to adhere to one of the most fundamental aspects of the FTP specifications. Contact your client vendor for assistance.
-
redhonker
- 500 Command not understood
- Posts: 4
- Joined: 2014-09-16 04:22
Re: 426 Connection closed; transfer aborted.
#5
Post
by redhonker » 2014-09-18 02:12
That was the keep-alive option from the client. I’ve turned that off. Still get the abort. Any other hint?
Thanks
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> Connected on port 2709, sending welcome message…
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> 220 Hello
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> AUTH TLS
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> 234 Using authentication type TLS
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> SSL connection established
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> PBSZ 0
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> 200 PBSZ=0
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> USER hh
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> 331 Password required for hh
(000002)9/17/2014 22:04:56 — (not logged in) (156.111.*.*)> PASS ********
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 230 Logged on
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> SYST
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 215 UNIX emulated by FileZilla
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> FEAT
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 211-Features:
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MDTM
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> REST STREAM
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> SIZE
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MODE Z
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MLST type*;size*;modify*;
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MLSD
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> AUTH SSL
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> AUTH TLS
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PROT
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PBSZ
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> UTF8
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> CLNT
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MFMT
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 211 End
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> CLNT Sync
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 200 Don’t care
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> OPTS UTF8 ON
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 202 UTF8 mode is always enabled. No need to send this command.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PWD
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 257 «/» is current directory.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 200 Type set to I
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> CWD /dv
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 250 CWD successful. «/dv» is current directory.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PWD
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 257 «/dv» is current directory.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> TYPE A
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 200 Type set to A
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> TYPE A
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 200 Type set to A
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MODE Z
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 200 MODE set to Z.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PROT P
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 200 Protection level set to P
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PASV
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,148)
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MLSD
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 150 Opening data channel for directory listing of «/dv»
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> SSL connection for data connection established
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 226 Successfully transferred «/dv», unfortunately compression did increase the transfer size by 11 bytes to 3569 bytes (0.30%)
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> CWD /dv/K08/
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 250 CWD successful. «/dv/K08» is current directory.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PWD
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 257 «/dv/K08» is current directory.
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> PASV
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,147)
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> MLSD
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 150 Opening data channel for directory listing of «/dv/K08»
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> SSL connection for data connection established
(000002)9/17/2014 22:04:56 — hh (156.111.*.*)> 226 Successfully transferred «/dv/K08», unfortunately compression did increase the transfer size by 11 bytes to 317 bytes (3.59%)
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> CWD 2014/
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 250 CWD successful. «2014» is current directory.
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> PWD
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 257 «2014» is current directory.
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> PASV
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,148)
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> MLSD
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 150 Opening data channel for directory listing of «2014»
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> SSL connection for data connection established
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 226 Successfully transferred «2014», unfortunately compression did increase the transfer size by 11 bytes to 30726 bytes (0.03%)
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 200 Type set to I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> 200 Type set to I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> 200 Type set to I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> PASV
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> 227 Entering Passive Mode (64,119,83,121,10,147)
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> RETR 130801_182708.file
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> 150 Opening data channel for file download from server of «2014/130801_182708.file»
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> SSL connection for data connection established
(000002)9/17/2014 22:05:36 — hh (156.111.*.*)> 426 Connection closed; aborted transfer of «2014/130801_182708.file»
(000002)9/17/2014 22:05:36 — hh (156.111.*.*)> QUIT
(000002)9/17/2014 22:05:36 — hh (156.111.*.*)> 221 Goodbye
(000002)9/17/2014 22:05:36 — hh (156.111.*.*)> disconnected.
-
botg
- Site Admin
- Posts: 34944
- Joined: 2004-02-23 20:49
- First name: Tim
- Last name: Kosse
- Contact:
Re: 426 Connection closed; transfer aborted.
#6
Post
by botg » 2014-09-18 07:36
Try disabling MODE Z for a test.
-
botg
- Site Admin
- Posts: 34944
- Joined: 2004-02-23 20:49
- First name: Tim
- Last name: Kosse
- Contact:
Re: 426 Connection closed; transfer aborted.
#8
Post
by botg » 2014-09-18 13:47
Unfortunately it doesn’t say in the log why the connection got closed or in which state it got closed.
If you use a network sniffer such as Wireshark, can you check which side of the connection sends the first RST packet?
000002)9/17/2014 22:04:57 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:57 — hh (156.111.*.*)> 200 Type set to I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> 200 Type set to I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> TYPE I
(000002)9/17/2014 22:04:59 — hh (156.111.*.*)> 200 Type set to I
Irrelevant but funny