Unable to obtain dynamiclink project ошибка

I have a slightly differnt situation, but the same «unable to obtain dynamiclink project» error.

As Dynamic Link has caused problems for me in the past, my workflow for the past 3+ years is to copy/paste footage from Premiere Pro into a new After Effects timeline, and render a ProRes file. This has worked flawlessly for me, and no need to mess with Dynamic Link once I had the files in AE.

Today, I opened a project that contained some previously warp stabilized clips, one of which had to be extended in length. So, naturatly I had to re-analyize that clip and re-stabilize it. However, now I’m getting the dreaded «unable to obtain dynamiclink project» error message…..but there IS NO DYNAMIC LINK PROJECT as I didn’t create one. What’s frustrating is that I tried replacing the clip, and reapplying warp stabilizer, but I still get the same error message. So now I am unable to use my project.

I have tried importing the files into a new project, but no luck. I copied and pasted the existing files into a new project, but again, no luck. 

Any suggestions would be appreciated, to avoid completely rebuild my complex AE project.

I have a slightly differnt situation, but the same «unable to obtain dynamiclink project» error.

As Dynamic Link has caused problems for me in the past, my workflow for the past 3+ years is to copy/paste footage from Premiere Pro into a new After Effects timeline, and render a ProRes file. This has worked flawlessly for me, and no need to mess with Dynamic Link once I had the files in AE.

Today, I opened a project that contained some previously warp stabilized clips, one of which had to be extended in length. So, naturatly I had to re-analyize that clip and re-stabilize it. However, now I’m getting the dreaded «unable to obtain dynamiclink project» error message…..but there IS NO DYNAMIC LINK PROJECT as I didn’t create one. What’s frustrating is that I tried replacing the clip, and reapplying warp stabilizer, but I still get the same error message. So now I am unable to use my project.

I have tried importing the files into a new project, but no luck. I copied and pasted the existing files into a new project, but again, no luck. 

Any suggestions would be appreciated, to avoid completely rebuild my complex AE project.

Обновлено

1. Скачать ASR Pro

2. Запустите программу

3. Нажмите «Сканировать сейчас», чтобы найти и удалить все вирусы на вашем компьютере.

Ускорьте свой компьютер сегодня с помощью этой простой загрузки. г.

В последние дни некоторые из наших читателей столкнулись с известным купоном с ошибкой Adobe Dynamic Link Error. Эта проблема возникает по ряду причин. Давайте обсудим этот метод сейчас. г.vidaconsciente.coImage: vidaconsciente.co В большинстве случаев ошибки исследования dynamiclinkmanager.exe, возникающие во время работы программы, приводят к ее ненормальному завершению. Большинство связанных с этими сообщениями об ошибках dynamiclinkmanager.exe означают, что Adobe Captivate не может найти этот файл при запуске, изображение может быть повреждено, что прерывает процесс запуска.

Adobe Dynamic Link — это специальная функция, созданная в Adobe Creative Suite Production Studio как практически любая фантастическая альтернатива промежуточному рендерингу между продуктами. Пользователи могут импортировать свои композиции между Adobe After Effects и Adobe Premiere Pro или Adobe Encore без рендеринга.

г. г.

Тем не менее, я обновил свои AME и After Effects для Creative Cloud до последних доступных версий, насколько я могу судить. AME — это модель 2017.0, сборка 11.0.0.131, а моей версией After Effects будет 2017.0, версия 14.0.0.207, и я продолжаю получать, как правило, одну и ту же ошибку AME «Возможно, невозможно подключиться к Adobe After Effects. Пожалуйста, ищите…”

Возможно ли, что с этим последним улучшением существует двойной разрыв между AME и AE? Я использую Mac поверх El Capitan версии 10.11.3. Моя динамическая ссылка как путь к серверу работала очень хорошо, так что во многих случаях соединение было невероятно медленным. Поэтому я обновил AME и AE, потому что думал, что эта концепция фактов улучшит производительность. Но теперь я начинаю получать эту ошибку. Любая помощь будет принята с благодарностью. Спасибо в подъеме!

Premiere Pro CC 2020 не просто выравнивает медиафайлы с AME через Файл -> Экспорт -> Мультимедиа -> Очередь

After Effects CC 2020 не подключается к AME при создании из AME

PP и AE вряд ли смогут соединиться, если я заменю медиакомпозицию AE.

Возможная причина проблемы:
Облачные каталоги Creative Apps были удалены с диска C, после чего стандартное обслуживание было перенесено на другой диск. Все приложения устанавливаются и кроме того работают нормально, кроме динамической ссылки.

File -> Premiere добавляет композицию Pro Sequence — AE, и AME успешно поставила этот метод в очередь.

мысли? Нужно ли мне выполнять чистую установку всего моего экземпляра Creative Cloud? Как это сделать?

Динамическая ссылка, Ошибка или проблема

Dynamic Link больше не активен после обновления элементов видеоприложений с поддержкой CC 2020. Это коснулось не только моего недавно установленного WordPress, но и моих любимых ранее установленных (и запущенных) приложений 2019 года.

У меня вопрос, как правильно установить ссылку на динамический компонент? Могут ли они поставляться с Media Encoder или Creative Cloud? Или это конфигурация системы?

С macOS 10.14.6 на рабочем столе imac 2017. Я использую корпоративную установку, как ПК, так и CC, честно говоря, у меня есть права администратора и я могу нормально настроить программное обеспечение.

• Невозможно перейти в Media Queue Encoder с помощью Premiere или After Effects: «Media Encoder не установлен» «Ошибка подключения в качестве Adobe Media Encoder»
• Невозможно переместить проект Premiere или After Effects Media Encoder программное обеспечение: «Не удалось подключиться к Adobe After Effects. Убедитесь, что Adobe After Effects и Adobe Dynamic Linkk установлены. “
• Невозможно импортировать файл After Effects в Premiere для импорта: после” При импорте этого файла процесса необходимо установить Adobe Effects. “

• Удалите и переустановите AE, PR и AME 2020.
• Удалите вместе с переустановкой приложение Creative Cloud для настольных ПК.
• Удалите AE, PR, AME (все версии) и CC Desktop, удалите все связанные папки, которые были извлечены и содержат все, что связано с динамическими ссылками “,”, затем переустановите CC Desktop and Video Apps 2020
• Перезагрузите компьютер на любом этапе.

Я попытался связаться с чатом поддержки, но мне было перенаправлено время для поддержки After Effects вместо обычной установки. Я могу попытаться связаться с вами в ближайшее время.

Если у кого-то есть идея или подход, которым можно поделиться, я полностью открыт. Из-за этого мои предыдущие рабочие процессы были временно отключены через 3 дня.

Загрузить одновременно для установки, динамическая ссылка, Ошибка или проблема Экспорт или визуализация, Импорт

Я чувствую, что у меня было так много проблем, пока я решал обновление AE. Я связал с обновлениями трафика 1 год безотказной работы до сих пор. Мой ноутбук никогда не обновлялся.

(1) Первоначальная проблема заключалась в том, что After Effects больше не может отправлять почти все файлы в кодировщик мультимедиа. Программное обеспечение обновлено.

(2) Когда я пытаюсь открыть и снова открыть After Effects, происходит сбой! Требуется инициализация ресурса. Иногда, когда я удаляю и переустанавливаю, я получаю его обратно.

(3) Однажды в каком-то кодировщике носитель, который это сделал, разбился строго при попытке подключения к библиотеке динамической компоновки, а затем произошел сбой!

(3) Когда я вернусь в After Effects, Media Encoder больше не будет загружаться !!

Я переустановил все программы Adobe и графики для дополнительной безопасности. Та же проблема.

Ускорьте свой компьютер сегодня с помощью этой простой загрузки. г.

Are You Having Problems With Adobe Due To Dynamic Link Errors?
Você Está Tendo Problemas Com A Adobe Devido A Erros Do Dynamic Link?
Hai Problemi Con Adobe A Causa Di Errori Di Dynamic Link?
¿Tiene Problemas Con Adobe Debido A Errores De Dynamic Link?
Heeft U Problemen Met Adobe Vanwege Dynamic Link-fouten?
Czy Masz Problemy Z Adobe Z Powodu Błędów Dynamic Link?
Haben Sie Probleme Mit Adobe Aufgrund Von Dynamic Link-Fehlern?
Har Du Problem Med Adobe På Grund Av Dynamic Link-fel?
Dynamic Link 오류로 인해 Adobe에 문제가 있습니까?
Rencontrez-vous Des Problèmes Avec Adobe En Raison D’erreurs Dynamic Link ?
г.

After reading some posts, especially on the Premiere Pro user forum and in Facebook groups about Premiere Pro, I realized that Dynamic Link is being underutilized because of the problems some people have. Users were experiencing After Effects compositions (comps) going offline, having to re-link comps every time they opened a project, slow performance, color differences, etc.

At first it was unclear what was going on, but watching some screen recordings of these issues revealed that at least some of the problems were self-induced and avoidable. Use the right workflow and Dynamic Link will most likely work flawlessly.

So what is Dynamic Link?

Essentially, Dynamic Link turns After Effects into a frame server for Premiere Pro. When you move the Premiere Pro playhead over a dynamically linked comp clip, Premiere Pro asks for a frame from the After Effects comp, and After Effects says: “here you go” and delivers the frame. Pretty simple, actually.

Sometimes this happens in real time, but if it’s a complex comp it may need to be rendered before you get smooth playback.

The main goal with Dynamic Link is to minimize rendering time. Rendering time is lost time. Using Dynamic Link also means you’re creating fewer media files on disk.

What Dynamic Link can do

A very common way to use Dynamic Link is sending a clip from Premiere Pro to After Effects to alter the footage or add visual effects. Or dragging an After Effects comp with motion graphics into Premiere Pro so that any changes you make in After Effects are automatically and instantly updated in the Premiere Pro timeline.

These are both massive timesavers!

After Effects is running—even when it’s not

It’s worth noting that Dynamic Link works even when After Effects is closed. When you play back a Dynamic Link comp in Premiere Pro (or using a MOGRT made in After Effects) After Effects’ frame rendering is needed. So even if After Effects is closed, part of it is still running as a background process.

If you’re not using third-party plug-ins, or the Cinema 4D renderer, the frames are rendered by AELib—an After Effects engine included in Premiere Pro. If After Effects is required, Headless AE will launch, provided you have After Effects installed. A few effects or formats have not been ported to AELib, and may also cause Headless AE to start.

Headless AE is an instance of After Effects, just without a UI, so it’s got Multi-Frame Rendering. AELib still has not gotten Multi-Frame Rendering as of this writing, but let’s hope it’s coming soon.

A brief history of Dynamic Link

Adobe Dynamic link was first introduced in Adobe Creative Suite Production Studio in January 2006, connecting After Effects CS2 to Premiere Pro CS2 and the now obsolete Adobe Encore DVD. Even Flash had Dynamic Link support at one time. These days, Dynamic Link can be used between Premiere Pro and Audition, and to Adobe Media Encoder.

Note: We will not cover Dynamic Link to Adobe Audition or Adobe Media Encoder in this article.

Dynamic Link changed a lot of workflows for a lot of users, and was one of the reasons that many editors started to get more interested in using Premiere Pro.

After Effects was already widely used, especially in the broadcast industry, so the ability to send a clip from the NLE timeline to After Effects with just a right-click or a keyboard shortcut was intriguing. That’s no surprise when we compare the steps needed, and the potential for error in the existing method.

Even if you don’t count the export stage, Dynamic Link reduced the workflow steps by half—every time you needed to use it. For example, if you get the clip back into the NLE and find it’s a bit too orange or there’s a spelling mistake—you’d need to go through steps 4-8 again for every fix you need to make. With Dynamic Link, you’ll just repeat steps 2 and 3 on the right side as many times as needed—often with no rendering necessary.

The biggest limitation of the early version was that the playback engine in Premiere Pro wasn’t very powerful. But the 64-bit Mercury Playback Engine introduced in Creative Suite 5 brought support for more RAM and GPU-accelerated rendering. That’s when Dynamic Link really took off.

OK, that’s enough about history. Now let’s get to work.

How to create a Dynamic Link

There are several ways to establish a Dynamic Link between the two apps. You can send one or more clips from Premiere Pro to After Effects, or you can import an existing After Effects comp to Premiere Pro. Let’s have a look at the options.

If you think you already know everything about creating a Dynamic Link, skip directly to Tips for a smoother Dynamic Link Experience.

Edit a clip from Premiere Pro in After Effects

With an After Effects project open, this will be your workflow: select one or more clips in a sequence and then choose File->Adobe Dynamic Link-> Replace with After Effects Comp. This option is also available when you right-click on the clip. The clips show up in After Effects, and you will also have access to all the clip handles.

You can send multiple clips and even nested sequences. The latter will become a nested sub-comp in After Effects.

Although the Audio part of a clip is carried over to After Effects and back to the bin in Premiere Pro, the Audio part is not replaced in the timeline, so any changes you make to Audio in After Effects will not be heard in Premiere Pro.

So if you need the Audio from After Effects, you can drag the Dynamic Link comp from the bin to the timeline with the audio.

Note: You can rename the Dynamic Link clips in the Premiere Pro timeline—even in the bin—and still use the Edit Original command (Cmd/Ctrl+E) with the clip selected to immediately open the correct comp in the After Effects project. At least on a single system, it should also be safe to rename the Dynamic Link comp in After Effects.

Create a new After Effects comp from Premiere Pro

Click File->Adobe Dynamic Link->New After Effects Comp and this will create a new After Effects project—or a new comp in an existing project if it’s already open in After Effects.

The created comp will be empty, so you might think that it’s easier to just open After Effects and create a new comp. But the benefit of doing it from within Premiere Pro is that the new comp will take its frame size and frame rate from the active sequence in Premiere Pro. It’s probably what you want, and removes the possibility of user error from the process.

Import an After Effects Comp

There are many ways to import an existing After Effect comp into Premiere Pro.

1. Dragging the After Effects comp into the Project panel in Premiere Pro is the most direct way. If the software windows are overlapping, hit Cmd+Tab (macOS) or Alt+Tab (Win) while still dragging, until you get to Premiere Pro, before dropping it in the Project panel or an open bin. This is probably the most common way to import an After Effects comp.
2. Clicking File->Adobe Dynamic Link->Import After Effects Comp, then selecting the .aep file and choosing what comp to import.
3. Using the Media Browser panel in Premiere Pro to select an .aep file. Media Browser will show the comps inside it so you can choose which one to import.
4. Or dragging an .aep file into the Project panel in Premiere Pro, and choosing which comp to import.

When you import a comp, any necessary subcomps will also be imported.

Note: Copying a comp from After Effects and pasting it into Premiere Pro does not work as expected, even though this may seem like a valid workflow. You’ll just get a sequence with the same settings as the comp, and all the source files inside it. Any text, shapes or other elements you’ve added in After Effects will not carry over.

If this sounds like a feature you’d like to see, you can add a feature request from Premiere Pro’s Help menu: Help->Provide Feedback.

Reverse Dynamic Link

Alternatively, you can go the other way, importing a Premiere Pro sequence into After Effects. This is not as common but can be useful in special cases. To do this, just drag a Premiere Pro project file (.prproj) into the Project panel in After Effects, and choose the sequence you want to import.

The sequence opens as one single clip in After Effects, and you can create a comp from that clip. Any changes you make to the Premiere Pro sequence will automatically update in After Effects.

Note: It probably doesn’t need saying, but you can’t “double up” a Dynamic Link. So if you’ve imported a Premiere Pro sequence to After Effects, you can’t import the comp back to Premiere Pro.

Now let’s get to what you came here for.

Tips for a smoother Dynamic Link experience

Remember that under the hood, Dynamic Link is just a headless copy of After Effects acting as a frame server into Premiere Pro. Always have this in mind, as it will help you understand why problems occur in some workflows.

Let’s have a look at some common causes for Dynamic Link failure.

Make sure the software versions match

After Effects and Premiere Pro must be the same version for Dynamic Link to work. This is the number one reason why it fails for some people. They have updated either one, but not the other. Update both at the same time—and include Media Browser—and it should work.

It’s basic, I know, and since Adobe now uses the same version numbering system on all apps, it should be easier to avoid version problems going forward.

Avoid missing After Effects project file, source files, or renders

Leave things where they are. If the .aep file (After Effects project file) has been moved, renamed, or even deleted, Premiere Pro loses the link to the After Effects project. If source files used in the After Effects project have been moved, renamed or deleted, the Dynamic Link shows Offline video.

While human error is typically the cause of these errors, it can be system related. For example, if you’re working off external drives, the file path to the project file on the drive might change if it’s reattached—or when the system boots.

Note: Renaming a comp in After Effects will also cause a Media Offline warning in Premiere Pro. Also, make sure your comps have unique names, to avoid linking to the wrong comp.

Losing render files also happens. It’s most common in shared environments where the scratch disks aren’t set up on shared storage. So when one editor renders a clip, it’s only available to them on that system, and will be missing on all the others. To avoid this, always save rendered files to a shared folder, preferably one named something descriptive.

Don’t hit Save so often!

You heard me. Some cautious users hit Save every minute. Other have a habit of saving numbered iterations of project files for easier recovery.

To avoid losing the Dynamic Link, don’t use File->Save As–>Save As to save iterations and versions updates. This creates a new project and leaves your Dynamic Link pointing to an older file. It’s a recipe for disaster.

Instead, use the File->Save As–>Save a Copy option. This keeps the main project open and saves a copy without opening it, avoiding the need to relink the .aep file every time you open the project.

“This creates a new project and leaves your Dynamic Link pointing to an older file. It’s a recipe for disaster.”

If you’re a frequent saver, Adobe also provides File->Increment and Save which adds a growing number to the file name. Just make sure your file name doesn’t already end with a number, as that number will increase by one. So Autumn Campaign 2022 will suddenly be named Autumn Campaign 2023, which can be misleading.

Autumn 2022 Campaign is a safer name, and will just be renamed to Autumn 2022 Campaign 2. If Ctrl/Cmd+S is part of your After Effects shortcuts muscle memory, just remap that to Increment and Save, and use Alt/Option+S (or some other combination) for the standard Save command.

There’s an option in After Effects preferences called “Dynamic Link with After Effects Uses Project File Name with Highest Number”. Enable this, and use Increment and Save, and you should never lose the link to the After Effects project.

Some people are surprised that the Dynamic Link comps need to be re-rendered every time they save the After Effects project. This is not so strange if you think about what Dynamic Link is.

If you hit Enter (Render Effects In to Out) in Premiere Pro to render the Dynamic Link comp clips, and then save the After Effects project, that means the source has changed—and this triggers a re-render. The same goes for Render Selection and Render In to Out. Premiere Pro is looking at a changed source and will need a re-render.

Use Render and Replace instead, and you won’t have to re-render anything.

Minimize re-renders with Render and Replace

As explained above, most users just hit Enter in Premiere Pro to render the Dynamic Link clips, and this causes re-rendering every time the After Effects project is saved. Use Render and Replace instead. That’s what it’s for. No more red render bars!

Tip: Render and Replace can also be used to render After Effects MOGRTs in Premiere Pro.

To replace the dynamically linked comp with a rendered file click Clip-> Render and Replace while the clip is selected. You can do this with multiple clips in one go, and render them during breaks.

Choose a high-quality format for your renders— like QuickTime ProRes 422 or 422 HQ for full-frame Dynamic Links, or ProRes 4444 when you need transparency. Whenever you need an active link again because you’re making changes in After Effects, choose Clip->Restore Unrendered to re-establish the live link.

Render and Replace is much more flexible than just rendering the sequence. You can move the clips around in the timeline whenever you want without re-rendering them, and you won’t lose render files when saving the After Effects project. Since the Dynamic Link is not live, the system also uses less resources, like RAM, CPU and GPU. This is all good stuff!

Just remember to hit Restore Unrendered for a clip when you actually need the active link again, like after you have made changes to a comp in After Effects.

I recommend that you keep your project tidy by having Dynamic Link comps and Dynamic Link renders in separate bins. I also keep the Dynamic Link comps in a separate folder in the After Effects project panel.

Note: If you delete the render files after you’ve used Render and Replace, Premiere Pro will show Media Offline. Use Restore Unrendered to re-establish the link to the comp.

Use custom keyboard shortcuts

I highly recommend creating a keyboard shortcut for File->Adobe Dynamic Link->Replace with After Effects Comp. Personally, I use the number 0 key. Yes, it’s the default for Multi-Camera Record On/Off Toggle, but as far as I know, that function no longer does anything meaningful in Premiere Pro.

Also, Clip->Restore Unrendered is a good candidate for a custom keyboard shortcut. I use the number 9 key because I very seldom have that many cameras in my multicams. If you’re doing more multicam editing than me, then feel free to use your F-keys or whatever keys you find ripe for a change.

Duplicate clips before replacing them

When you select clips and replace them with an After Effects comp, there’s no easy way to get back to the original video clips. To get easy access to the originals, make copies of them before sending them to After Effects,

You can disable the duplicate clips while they’re still highlighted. The keyboard shortcut for Enable/Disable Clip is Shift+E on Windows and Shift+Cmd+E on macOS.

So the workflow goes like this:

1. Alt/Opt-drag a copy of your clip to another track.
2. Disable the copy using the keyboard shortcut, or put it on a track with the eye icon (Toggle Track Output) off.
3. Select the original clips and use your custom keyboard shortcut to Replace with After Effects Comp.
4. Alt/Cmd+Tab over to AE, and do your thing there.
5. When you’re finished, Alt/Cmd+Tab back to Premiere Pro.
6. If necessary, hit your custom keyboard shortcut for Render and Replace to get smooth playback.
7. Use your custom keyboard shortcut for Restore Unrendered if you need a live link again.

Of course, you could also set up a macro, or even create an extension that does multiple steps with one click.

Avoid Performance Hits

It’s important to understand that every live Dynamic Link instance eats some RAM. As we’ve seen, Render and Replace can help save resources.

You should also use as few After Effects projects as possible. If the dynamically linked After Effects comps are in multiple After Effects project files, Dynamic Link will need to run a bunch of After Effects (headless) processes. Depending on system specs, that can create some huge bottlenecks.

Best practice, if possible, is to use one After Effects project with multiple comps, rather than lots of single comp projects.

After Effects renders comps faster internally than Premiere Pro can do via Dynamic Link (or MOGRTs), for now. Sometimes much faster. To reduce playback delays for very complex comps, you can make a Dynamic Link clip offline, and replace it with a video clip you’ve rendered out of After Effects.

Free up some disk space using less cache

After Effects Disk Cache may be filling up your disks when you’re using Dynamic Link. A common remedy for playback problems with Dynamic Link is scrubbing or playing back the clips a few times in Premiere Pro. This will cache frames, and can improve playback. But these frames will be stored in RAM, and/or on the disk if Disk Cache is enabled in After Effects preferences.

Both can reduce performance. if Disk Cache is stored on your system drive (not recommended, but some systems only have one drive) it can fill it up. You can try Edit->Purge->All Memory & Disk Cache in After Effects to see if it helps performance in Premiere Pro.

Disk cache eats as much of your disk space as you allow it to. You can set the maximum size of the Disk Cache in preferences for Media & Disk Cache in After Effects.

Your Dynamic Link clips will perform better without rendering if you enable Disk Cache, so if storage space is not an issue, go ahead and keep it enabled. You can Use Render and Replace in Premiere Pro to avoid building up Disk Cache just by playing back the Premiere Pro timeline.

Make sure your color spaces match

It’s common to build lower thirds and other graphics using a guide layer in After Effects to adjust transparency. An example would be a call-out title or a text message effect. You need the original clip in After Effects as a guide, to place the elements correctly, but you don’t need the original clip to be part of the Dynamic Link.

A quick and easy way is to send the clip to After Effects using Replace with After Effects Composition as usual, but immediately make the clip a Guide Layer in After Effects.

This is done by choosing Layer->Guide Layer—or right-clicking on the clip and choosing Guide Layer. Guide Layers are not rendered, they’re just visible while you’re working in After Effects. The Dynamic Link clip in Premiere Pro will only contain the overlay, not the original clip.

But if you build a comp with a transparent shape in After Effects, it may look much more transparent in Premiere Pro. This is because Premiere Pro works in 32-bit linear color by default, while After Effects works in 8-bit non-linear color by default.

To make After Effects use linear color, go to File->Project Settings->Color and check Blend Colors Using 1.0 Gamma. You should probably set the Depth to 32-bit, too, if your system can handle it—it can make a huge difference for color sensitive work (like Keying) and can avoid unnecessary banding.

With this setting, After Effects should show an image that’s much closer to what you’ll see in Premiere Pro.

Alternatively, you can make Premiere Pro work in non-linear color by turning off Composite in Linear Color in Sequence Settings. But you’d have to remember to do that in every sequence, or always use a Sequence preset with this checkbox off.

Dynamic Link and proxies

If your clips have proxies attached in Premiere Pro, they’ll also be available in After Effects. By default, After Effects will use the original media but you can use the proxy clip instead by toggling the Proxy button to the left of the file name.

Flatten your multicams

Dynamic Link will preserve Multi-Camera Source Sequences in After Effects. You’ll not get only the active angle, but all of them, plus some extra comps. If you don’t want all the Multicam angles, right click on the Multicam and choose Multi-Camera->Flatten before creating a Dynamic Link. Of course, you’ll do this on a copy of the multicam clip, to preserve the multicam functionality.

Can you use a MOGRT instead?

You won’t be as likely to lose the link to MOGRTs in a shared storage environment as if you use Dynamic Link. I’ve seen a lot of Dynamic Link usage where MOGRTs would yield a much better and faster workflow.

If Motion Graphics Template Media is stored locally on each computer, it will be missing on all the other systems, available only on the system where it was added. This is a Bad Idea. So set the Scratch Disks for Motion Graphics Template Media to the shared storage, and use Libraries to share the templates to team members.

Troubleshooting Dynamic Link

There are many reasons why Dynamic Link could fail. Here are some of them, plus some ways to hopefully fix them.

Network and shared storage issues

The Dynamic Link process uses ports and protocols to connect to or from a network drive. You should contact the network admin if you suspect that firewalls may be the cause of problems with Dynamic Link. For network storage, SMB (server message block) is almost always the recommended protocol for video editing software.

The server may also have permissions issues, or the clock may be out of sync with one or more of the systems that are using them—which can cause all kinds of interesting trouble. Setting the clock on the server and the systems to auto-sync to a common source regularly may be the simplest solution.

Some servers do not support all characters, and may be confusing a ® to R, or a ™ to TM, or regular dashes to em-dashes, etc. This changes the file name and may cause After Effects projects or source files in the comp to go offline. Avoiding such special characters in file names is good advice.

Preferences gone bad

Many issues with software can be caused by corrupted Preferences.

To restore the default preferences in After Effects, press and hold Ctrl+Alt+Shift (Windows) or Cmd+Opt+Shift (macOS) while After Effects is starting.

To restore the default preferences in Premiere Pro, press and hold Opt (macOS) or Alt (Windows) while Premiere Pro is starting. Just be aware that you’ll have to redo any preferences you have changed from the default.

Corrupted After Effects project

I’ve had After Effects projects that were working fine, then stopped working with Dynamic Link. Creating a new After Effects project and importing the corrupted one into the new one made Dynamic Link behave normally again.

If you do this, you’ll have to replace all the dynamically linked comps with the ones from the new project, which is a hassle, but at least Dynamic Link will work again.

Stale media cache

Media cache files can get corrupted or outdated. The latter happens after updating the software. Adobe may have changed format support or other things under the hood, causing the media cache files from the old version to misbehave in the newer version. Deleting all the media cache files forces Premiere Pro and After Effects to rebuild the media cache, which often makes things work again.

To do this in Premiere Pro, close all projects. Then go to Preferences for Media Cache and click on the Delete button next to “Remove Media Cache Files” and choose to Delete all media cache files from the system.

This should delete all the media cache files for Premiere Pro, After Effects and Adobe Media Encoder. If you want to make absolutely sure, go to the folder where you’ve chosen to store your media cache files and manually delete all the subfolders. Don’t worry, they’ll be rebuilt automatically.

Please note that deleting the unused media cache files will not help. It’s always the ones in use that will cause problems.

Installation/update issues

The software installation may go wrong, especially when updating Premiere Pro and After Effects, as opposed to a clean install. Reinstalling After Effects, Premiere Pro, and Adobe Media Encoder may help. Restart the whole system after doing this. Or do a clean install, as explained below.

Turning off Multi-Frame Rendering has also been reported to help in some cases. Go to Preferences in After Effects and uncheck Enable Multi-Frame Rendering under Memory & Performance. Restart both After Effects and Premiere Pro and try again.

Lacking Permissions

Security/privacy settings on your system may prevent the Dynamic Link process from accessing your drive. This often happens after a security update of the OS or some other software, especially on macOS.

One way to fix this on older versions of macOS would be to repair permissions. According to Apple, this should not be necessary in newer versions of macOS.

You can also just uninstall and reinstall After Effects and Premiere Pro—and even Adobe Media Encoder—to re-establish the necessary folder permissions.

It’s also possible that aggressive antivirus software could be blocking the Dynamic Link process.

Bugs

Bugs do sneak in from time to time. There was a bug in the initial 22.0 release that made Dynamic Link unusable, but it was fixed in 22.0.1 a few days later. The 2018 and 2019 versions also had some initial Dynamic Link bugs.

If you think your Dynamic Link problems may be caused by a bug, look for an update—or roll back to a previous version until it’s fixed.

Do a clean install

If nothing else works you can try uninstalling both After Effects and Premiere Pro and running the Adobe Creative Cloud Cleaner tool—a utility to clean up corrupted installations. You must choose your OS at the bottom of the linked page to show the download link and instructions for your OS.

As a last resort, create a new user account in macOS or Windows and see if that helps.

If Dynamic Link still fails: export the comp

If nothing else works, you can export the comp as a ProRes file (use ProRes 4444 if you need transparency) and place it in the Premiere Pro timeline. I recommend using Composition->Add to Adobe Media Encoder Queue for export.

It’s not a Dynamic Link anymore, but at least you’ll be able to finish the job.

Final notes

I use Dynamic Link all the time and I honestly believe it has saved me weeks of work since its birth in CS2. I can’t imagine editing documentaries, corporate movies, and social media videos without it.

Hopefully you now have a better understanding of how Dynamic Link works and what its limitations are. By using the techniques and advice described in this article, you should experience fewer problems, which should give you the confidence you need to start using Dynamic Link more.