After walking from the building I am working in across the field to the building where the printer is I was unable to pick up my printing, instead I found a screen on our Xerox Printer giving me the error code 016-757.
The 016-757 error message indicates that:
- Cause – The entered password is wrong.
- Remedy – Enter the correct password.
My computer has picked up the Auto printer driver and tried to use that, instead of my local printer driver. Because of that is was using the default user password, instead of my custom password.
All I had to do was change to my proper printer driver and it worked, after walking back and forth between buildings again.
If you need to change your password for the printer driver you can access it through the printer properties.
- Click on the “Configuration” tab
- Choose the account mode to “User”
- Click on “Detailed User Settings”
- Change the password details as per instructions from your printer administrator
If you have any other questions about the security on the printer you will probably need to ask your printer administrator, as every one of these printers will inevitably be set-up differently.
Technorati Tags: xerox, 016-757
Auditron-Prohibit Service. The use of this service is prohibited.
Procedure
•
Ask the account administrator to permit the use of services.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw — update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
016-757 Auditron-Invalid User RAP
Auditron-Invalid User. A user account is invalid.
Procedure
•
Set the correct account and retry.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw — update if required
07/2011
2-257
BUS Updated 12/2011
Status Indicator RAPs
016-756, 016-757
Сообщения об ошибке на панели управления
Принтер Phaser® 6280
140
Сообщения о принтере и других элементах
Сообщение
Условие/Причина/Действие
Перегрев, подождите /
Ошибка 042-700,
подождите
Внутренняя температура принтера слишком высокая.
Принтер был остановлен. Подождите 1 час и перезапустите
принтер. Проверьте, что вокруг принтера достаточно места
для охлаждения и что вентиляционные отверстия не
перекрыты.
Нет лотка 024-946 /
Нет лотка.
Вставьте лоток 2
Лоток 2 выдвинут наружу. Задвиньте лоток 2 в
правильное положение.
Нет лотка 024-947 /
Нет лотка. Вставьте
лоток 3
Лоток 3 выдвинут. Задвиньте лоток 3 на место.
Застр. в лотке 1 (MPT)
,
2
или
3
Проверьте лот. 1 (MPT)
,
2
или
3
Откройте двер. А
Застряла бумага в лотке 1 (MPT), 2 или 3.
Вытащите застрявшую бумагу. Откройте и снова закройте
переднюю крышку. См. раздел
Застревание бумаги
на
стр. 120.
Открыта дверца A
Закройте дверцу A
Открыта передняя крышка.
Закройте переднюю крышку.
Функция выкл.
Ошибка 016-158
Пользователь не зарегистрировал цветную печать в
функции идентификации.
Обратитесь к вашему администратору.
Неверное задание
Нажмите кнопку ОК
Ошибка 016-799
Это сообщение выводится, если конфигурация принтера
в драйвере принтера не соответствует используемому
вами принтеру.
Нажмите кнопку Отмена для отмены задания печати.
Проверьте, что конфигурация принтера в драйвере принтера
соответствует используемому вами принтеру.
Неверный польз.
Ошибка 016-757
Пользователь не зарегистрирован для печати на принтере с
помощью функции идентификации.
Обратитесь к администратору.
Превышен лимит
Нажмите кнопку ОК
Пользователь превысил предел на количество
страниц, которое можно распечатать с помощью
функции идентификации.
Обратитесь к администратору.
Неверный польз.
Нажмите кнопку ОК
Пользователь не зарегистрирован для печати на принтере
с помощью функции идентификации.
Обратитесь к администратору.
Every time when your printer refuses to print, the anger is real. Oh Yes! Don’t try to hide your anger, rather it would be better to find a solution to the problem. When the machine shows 016-757 error at the end of the incomplete job, there is nothing to worry. It is a technical device and some of the minor issues should not get in between you and your work. So get in touch with the professionals, Xerox Printer Support will help you out fast and in an easy manner.
The error Code 016-757 usually occurs due to the wrong password entered or because of the Audition security preventing users from printing documents. This is a prevalent issue after installing Xerox driver for MAC OS. This article will explain and solve the issue in simple steps on Fixing the Xerox Printer Error Code 016-757:
Check XSA
Since the features can’t override 1 user, so, check XSA is ON or OFF. Also ensure that if XSA is ON, Mac users have to enter the ID and be allowed for the gain print access. This solution is very helpful for Mac users as you just set the Mac to use accounting.
Verify Accounting Type
Whether you are a Mac or Windows user, you must ensure to select the right accounting type on the printing machine i.e. Network vs. Standard Accounting.
Verify User ID and Account
After you enter the identity, you have to verify the User ID and Account ID. In case of some changes needed, it can be done easily through accessing the Xerox printer properties and follow the steps:
- Go to Configuration tab > select User > click Detailed User Settings
- Next, change the password details keeping the precise standard of password in mind
This will most probably resolve the Error Code 016-757, if not, then consult our Xerox Printer Support Number Canada 1-844-888-3870. Our technicians are extremely fast and efficient to troubleshoot your issues in the committed time.
Published
February 19, 2018February 19, 2018
Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.
Xerox Printer Error code 016-757
Measures Taken To Fix Xerox Printer Error Code 016-757. In Xerox Printer are famous for their incredible features and the performance they render. They come in different varieties to fulfill the needs of its customers. Anything that you may need during or for printing purpose is right there in the printer. However, there are some errors that these printers show sometimes. If you have come across the error named 016-757, then it is caused by entering the wrong password or Auditron security. To fix this issue please follow the procedure given below.
-
Enable XSA :
Enable XSA and create a user ID of 111.
Set the PPD in CUPS and then to ‘Send user ID only’.
Once applied it, you must try to print and enter 1111 if you are asked, and the job will be done.
Make sure to select ‘Accept solution’ or rather select thumbs up icon.
-
Verify your User ID and Account:
It is mandatory to verify your account and the ID related to it. Moreover, if you wish to change the password for the printer driver for Xerox, then follow the steps below.
Select the Configuration button.
Select the User account mode followed by ‘Detailed use settings’.
You can here change the password and save it.
Try entering a default password.
You must disable Auditron security which will be found under Administrator Menu.
Now, remove the print queue if the error still prevails, this may help in resolving this problem.
Contact Xerox Printer Technical For 016-757 Error In Xerorx Printer
If you’ve exhausted all of your options and your printer is still malfunctioning, contact our Xerox Support Assistant. We have a highly qualified Xerox printer tech support team available 24 hours a day to help. Our Xerox customer service number allows you to contact us easily, and our experts will assist you in every way they can. If you want technical internet chat help, you can contact us via our online portal. You can also use our Xerox Help ID to write us a letter to report the issue. Our experts will connect with you as soon as possible.
Member since
October 27, 2020
Sometimes, XEROX Printer users come across an error code 016-757 because of the entering of the wrong password to auditron security settings that puts an off on printing. Some users face this error code when they install XEROX driver for Mac OS. Follow these steps to fix this issue, in case, need help then contact XEROX support team.
Directions to follow:
Process 1: Enabled XSA
- XSA remains ON or OFF for all users and no can’t override 1 user so when you find XSA is ON, Mac users need to enter the id’s in order to have print access. This is a helpful solution for all Mac users.
- First, Mac users need to check they have enabled XSA and created a user ID of 111.
- After that, you have to set the PPD in CUPS that always direct and to “send user ID only.”
- One can apply this at the time of printing, you get the prompt then you have to enter 1111 and this job gets completed.
- Make sure you have selected “Accept Solution” or choose thumbs up icon to enter Kudos for posts that fix your issues.
Process 2: Verify Accounting Type
- Mac users, as well as Windows users, need to make sure that they have chosen a proper accounting type on a user’s machine e.g. Network vs Standard Accounting.
Process 3: Verify user ID and account
- You need to check once that you have entered the right user ID and account ID. In case, you need to change the password, you can do so by visiting its printer properties and then follow these steps.
- First, press on “Configuration” tab, after that, you have to select account mode to “user”.
- Next, you have to press on “Detailed User Settings” and then change its password details by following the prompts you get from the printer administrator.
- Now check if this error code 016-757 is resolved, in case not, then move on to its next process.
Process 4: Enter the default password
- You need to enter the correct one or a default one password e.g. default 1111.
Process 5: Put off auditron security settings
- You can try by putting off auditron security settings from the administrator.
Process 6: Stop print queue from the machine
- If you find the same situation after following these given steps, then try to stop the print queue from machine and then add again. We hope this way your problem gets resolved.
In case, you need help then make a call on XEROX Printer Support Number Australia 1-800-921-785.